Nice score Dumo.Originally Posted by Dumo
Had some issues with the Z68XP UD5 but since flashing to latest bios F3, it works great.
The rebooting issues are gone, it recovers from a failed oc like it should.
Clear cmos button works first try without having to hold it down for ever, removing battery, 24 pin or removing a stick of ram.
Switching out memory kits is no longer a pita because of the boot loops.
I dont even need to clear cmos now to go from PSC to hypers. It will reboot twice, third time it goes to bios, and I just change timings, sub timings, vdimm, set the multi back to 56 and it boots like a champ.
Clocks the 56x chips easy now using the 56x multi.
Its better with hypers than the p67 ud5/ud7 and requires much less vdimm. Running a kit of 2333 c9 hyperx 2133-2150 6 9 6 27 at 1.72v, and the 2000c8 hyperx hypers at 2150 7 7 7 24 1.76v bios.
It also allows me to use the 2000c8 Dominators at 2133 7 7 7 24, but only for 3D benching, still wont pass 32m but its a big step forward from before.
Props to Gigabyte for getting this right
Reply With Quote
Bookmarks