sin0822 , according to you which bios is the most stable for overclocking, i just updated to f5 and i BSOD when trying to prime after 5s with 5ghz and 1.52V, maybe my chip is bad i dont know.
But id like to have the best bios to work with . Thanks
sin0822 , according to you which bios is the most stable for overclocking, i just updated to f5 and i BSOD when trying to prime after 5s with 5ghz and 1.52V, maybe my chip is bad i dont know.
But id like to have the best bios to work with . Thanks
Asus Maximus Extreme IV
2600k
Tri-Fire 6950
8gb Ram
Vertex 3 Raid 0
Caviar Black Raid 0
F3H. would be nice you read above and all the thread, new bioses has been a pain for all of us i didnt try F5 but just for what u say i just guess its the sameOriginally Posted by qgshadow
my experience with newer bioses is
i passed tests or just use the PC on X volts LOAD...then i go to newer bioses put that exact LOAD volts or more and BSOD test BSOD idle...painfull
test the one i say
cheers
Sergio
Last edited by andressergio; 07-21-2011 at 04:12 PM.
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
spot on sergio f7e was last bios that was ok f3h seems similar but all the newer 10 levels of llc i can't get stable at the same volts which the older bioses just walk it
yeah but F3H doesnt have 10 LLC just the good all ones
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Posting Permissions
Reply With Quote
Bookmarks