changelog?
changelog?
i7 4770k @ 4.4GHz | MSI MPower | 8gb Geil Evo Corsa 2133 | Gigabyte GTX670 wf3 | Samsung 830 256gb | 3xWd Re3 raid5 | Antec HCG 620w
Θ Core i7 4770k 4.4ghz 1.3v :'( Θ Core i7 2600k 4.5ghz 1.344v Θ E8400 500x8 4ghz 1.36v Θ Core i7 860 @ 4ghz 1.328v Θ Turion M500 2.2ghz 1.025v Θ Phenom II 955 c3 3.91ghz 1.52v Θ Phenom II 545 3.77ghz 1.47v Θ
_~{ ALL RS }~_
A new attempt to get it right after the failure with the cancelled 1702 BIOS release.
Release Notes
[ 1801 ]
----------------------
1. 2.2TB or larger HDD can be supported under RAID mode.
(Need to install IRST 10.5 version driver first, you can find it under "SATA" catalogue)
thanks to Hiker at vip.asus.forums
Intel S1155 Core i7 2600K Quad Core CPU
Gigabyte GA-Z68X-UD3R-B3 Socket 1155
DDR3 16GB (4x4G) G.Skill Ripjaws 1600MHz RAM Kit
128GB Crucial M4 2.5" SATA 3 Solid State Drive (SSD)
2TB Western Digital BLACK edition 64M SATA HDD
1TB Western Digital Green 64M SATA HDD
NVIDIA GTX560 1GB Gigabyte OC PCIe Video Card
23.6" BenQ XL2410T 3D LED Monitor
CoolerMaster RC-922M-KKN1 HAF Mid ATX Case Black
Thermaltake 775 Watt Toughpower XT ATX PSU
LG BH10LS30 Blu-Ray Writer
Corsair Hydro H70 High Performance Liquid Cooling System
went to play with sabertooth and cant overclock
if i set multi to 46 blk goes to 71 lol set to 48 it boots @ 42 n 80blk lol
its like its stuk @ 3.3
i had her @ 4.8
kid went into bios and selected oc tuner lol he was @ 4.3 on load 1.6 idle
figured it out lol i think
so board tells me i'm @ 3.3 aida64 tells me i'm @ 3.3 but cpuz tells me i'm @ 4.8 lol
guess wich proggy is right lol
Last edited by zsamz_; 06-23-2011 at 08:48 PM.
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
1801 bios input anyone??
Nothing anymore
Sup guys cheers to all new on this thread
i got this mobo and thought the shields was made on aluminium but is plastic...
can anyone show me how u are using it ? i see that i have to put a fan in the middle but i read some of putting a 12x12 fan pointing to the cpu area and i didnt get that...
or u just removed that shield ?
thanks in advance
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
i didnt use the fan slot
i put 2 60mm fans on the pwm with zipties lol
just dissable c1 c3 c6
set multi before dissabling speedstep
my board is quirky lol
but works good
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
thanks friend !
but u took out the black cover ? or left it ?
im building a PC for my wife so the sabert is there and if i can get a nicer 2600K i will put it there on the UD7 it boots x54 4C/8T benched 3DMV and 3DM11 hope the asus can do at least the 5Ghz stable HT i run it on my UD7
thanks bud !
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Last edited by zsamz_; 07-01-2011 at 03:39 PM.
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
1850 Bios is out http://www.station-drivers.com/page/...ooth%20p67.htm
Not tested it, nor seen a changelog..
Last edited by Ourasi; 07-04-2011 at 05:18 PM.
| Ci7 2600k@4.6ghz | Asus SaberTooth P67 | Sapphire HD7970 | Samsung B555 32" | Samsung 840 PRO 128gb + 2xIntel SSD 520 120GB Raid0 + 2xC300 64GB Raid0 | Corsair Vengeance 16GB DDR3-1600 8-8-8-24 | Vantage GPU=40250 |
BIOS 1850 (Beta) released July 4, 2011
http://dlcdnet.asus.com/pub/ASUS/mb/...-ASUS-1850.zip
Beta Version
Release Notes
[ 1850 ]
----------------------
Improve system stability.
Intel S1155 Core i7 2600K Quad Core CPU
Gigabyte GA-Z68X-UD3R-B3 Socket 1155
DDR3 16GB (4x4G) G.Skill Ripjaws 1600MHz RAM Kit
128GB Crucial M4 2.5" SATA 3 Solid State Drive (SSD)
2TB Western Digital BLACK edition 64M SATA HDD
1TB Western Digital Green 64M SATA HDD
NVIDIA GTX560 1GB Gigabyte OC PCIe Video Card
23.6" BenQ XL2410T 3D LED Monitor
CoolerMaster RC-922M-KKN1 HAF Mid ATX Case Black
Thermaltake 775 Watt Toughpower XT ATX PSU
LG BH10LS30 Blu-Ray Writer
Corsair Hydro H70 High Performance Liquid Cooling System
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
ive tried google'ing the new 1850 bios and didnt come up with anything of importance. Anyone have feedback?
Nothing anymore
Guys
been a GIGABYTE fan i will test this mobo that i liked a lot
couple of questions ?
1) should i install a fan on the middle a 5x5 one for max airflow ?
2) is that plastic cover efective why plastic ? doesnt overheat ?
3) wich is a stable bios to start ?
i would like a pic of a installed fan on the mobo if not to much asking
cheers to all i will report how it behaves compared to my UD7
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
install the 6CM fan Sergio it really helps... will have to dig for the screenshots of the thermal radar...
Last edited by Leeghoofd; 07-06-2011 at 01:02 PM.
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro Asus Saaya yupp, I agree
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
Hello!
Not sure if this was right spot to post but ill do it anyway!
I ordred this MB and dumb me a i7 2600. No K.
Its working fine, and i have OC it a bit. But there is a slight problem where the multiplier dont go up to x42 as i have in UEFI bios in windows and CPU-Z when under load. It goes to x39 and is rocksollid there. It gives a nice OC of 600, but from what i have in BIOS it should be 4.3+. aka 900 OC.
I used the auto OC function first and it set BLK to 103 and x42 turbo multiplier.
Anyone got and idea to why this happens, and it doesnt go to max multiplier underload in Windows?
There is also another part of this. I tried to set the BLK to 100 again and then try. The multiplier was then 40 of the bat in windows. And during a quick test at diffrent loads it fluxed from x39 to x41. But again not hitting x42.
I also tried only running 1 thread of test to see if it hit x42 but nothing diffrent on both BLK settings.
Ill add a pic from testing @103 and x42 in bios. Showing x39 in CPU-Z. (have gotten Realtemp btw, i know asus thing aint most accurat)
C1 on
C3 off
C6 off
Speedstep on
(have tried everything off also, but no diffrence)
Any tip or help would be much helpfull!
guys im testing asus i really love the BIOS and features, but im kinda lost on Load Line Calibration, wich one u use ? i tested regular and high
thanks !
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
thanks zsamz
being a gigabyte fun for years now i must say i like this board a lot, love bios, uefi, and regulation, im testing my x54 chip on it with my antec 920 Khuler and it does really well, i need another LCD as im moving permantent to my lit lab lol to test it, it booted x54 perfect
cheers and thanks !
should i upgrade to latest bios ? cauz i see that it dont display CPU speed correctly on POST and inside BIOS mine brought 1502
any tip i appreciatte very much as im starting to discover new things with this board
cheers
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
some pics of my quick build of the mobo
Uploaded with ImageShack.us
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Bookmarks