Why is it so hard to get Linx stable? I got a 2500K running fine on 5.0Ghz, IntelBurnTest and everything else without a hiccuup. Right now i'm running Linx at 4.6Ghz and I just hope it will be stable. Can anyone explain this staggering difference?
Why is it so hard to get Linx stable? I got a 2500K running fine on 5.0Ghz, IntelBurnTest and everything else without a hiccuup. Right now i'm running Linx at 4.6Ghz and I just hope it will be stable. Can anyone explain this staggering difference?
Sandy Bridge incoming.
You're going to get a lot of technical reasons but basically, LinX is a B**CH.
PS
And I'm not saying Prime is easy either.
Last edited by newhit; 06-19-2011 at 12:50 AM.
Sig always changing.
Depending on which version of IBT you are using. Its because LinX linpack library is updated more offten and has support for your cpu. IBT has been out dated for awhile.Originally Posted by digitalfrost
Main Rig
Gigabyte z78x-OC Bios F5n
i7-4770k batch L310B492 Malay @ 4.5ghz with HT 1.2v
Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn
HiS ATI HD 6950
Corsair Force GT 120 GB Sata3 SSD (boot drive) on Intel sata3 controller port0
Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port1
Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port4
CORSAIR CMPSU-850TX PSU
Swiftech MCP655-B Pump
EK Suppreme HF Cpu Block
Swiftech Mcres Micro Rev 2 Reservoir
Black Ice GTX Xtreme 360 Radiator
Server
HAF 932
Gigabyte z77x-UD3H F13
i7-3770S batch 3212B621 supports VT-D and low power
32GB 4x8gb Muskin Enhanced Blackline 10-10-10-27@1.65v
Vmware vSphere ESXi 5.0u1
4x500GB Hitachi Deskstar 7K1000.D Raid 10 on a IBM M1015 <- DataStore
Sapphire HD 5850
What a lovely forum update. Just compare these two.
№ User CPU name & frequency C / T vCore Motherboard Cooling type Batch # 1. lkozarov Core i7 2500K @ 5500.0MHz 4 / 4 1.584 ASUS P8P67 Pro Single Stage 3048A446 2. newhit Core i7 2600K @ 5407.7MHz 4 / 4 1.692 Gigabyte P67A-UD7 Water L042B076 3. TWK_OCZ Core i7 2500K @ 5341.9MHz 4 / 4 1.608 ASUS P8P67 Pro Water L051B314
Rank | User | Frequency and # cores + threads | vCore | Motherboard | Cooling type | Full Batch #
- lkozarov | Core i7 2500K [4C 4T] @ 5500.0MHz | 1.584 | ASUS P8P67 Pro | Single Stage | 3048A446
- newhit | Core i7 2600K [4C 4T] @ 5407.7MHz | 1.692 | Gigabyte P67A-UD7 | Water | L042B076
- TWK_OCZ | Core i7 2500K [4C 4T] @ 5341.9MHz | 1.608 | ASUS P8P67 Pro | Water | L051B314
Donate to XS forums
WOWLooking great!
Maximus 5 Gene | i7-3770K @ 5GHz | ADATA 2x2GB @ 2.6GHz 9-12-10-28-1T | HD7970 @ 1200/6400
Rampage 4 Extreme | i7-3930K @ 5GHz ||| X58-A OC Orange | i7-980X @ 4.6GHz
Will do it manually, might be done by the end of the next week.
Donate to XS forums
Woa, first time noticed table feature used. Worthy addition from forum upgrade indeed.
thx for the update´s zalbard
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
Batch 3103B306 solid wall @ 5405Mhz - Ud7 B3 - Single Stage -15C evap. idle temp. - 1.405 Vcore LLC7
Last edited by Dumo; 06-25-2011 at 02:24 AM.
My new results, pretty crap considering my RIIIE only needed 1.33v for 4.5ghz. This board is E770
Uploaded with ImageShack.us
@xdave: is that on air?
Also, updated!
Donate to XS forums
nope, its on water.... but it very warm in my house. also, the batch is #3912A859@xdave: is that on air?
Also, updated!
OK, cool, thanks! I added this info.
Nice job, by the way!
Donate to XS forums
Uploaded with ImageShack.us
Under the hood:
Motherboard - MSI Big Bang Xpower
CPU - Intel Core I7 970 3.2 @ 4.4ghz/w 1.28vcore
Cooler- Intel Stock Heatsink
RAM - Gskill Trident 3x2gb @ 2100 cl9
GPU -2x Nvidia GTX 580 SLI
Soundcard - Creative xfi xtremegamer
DVDRW - LG 22x DVD RW Drive
Samsung Spinpoint f3 500gb HDD
Tower- MM Ascension CYO Brushed Aluminum
Monitor - Sony Bravia 40" LED 1080p 120hz
Keyboard - Razer Tarantula
Mouse - Logitech G5
Way to fail at reading. Obvious liar is obvious.
Core i7 990x @ 4665MHz 30x155.5 | ASUS Rampage 3 Extreme 1601 Modded BIOS | 24GB (6x4GB) Mushkin Redline 999057 @ 1866MHz 8-8-8-24-1T
2x MSI N770-2GD5/OC SLI Custom BIOS @ 1228/7464 | Samsung 840 EVO 1TB | 4x 3TB WD Red Raid 5 | Corsair RM1000 | 2x Dell SP2309W 2048x1152
H2O Cooled | EK - Supreme HF Full Gold - FB RE3 | Swiftech - MCP35x2 - MCRes Micro v2 | HWLabs - 2x GTX 120 - GT Stealth 120
7x Gentle Typhoon AP-0A 2150RPM | 1x Enermax Magma UC-MA12 1500RPM | Lian Li PC-A10B | 5GHz Gulftown
WTF is that?!This is not "Post your desktop for no obvious reason club".
Maximus 5 Gene | i7-3770K @ 5GHz | ADATA 2x2GB @ 2.6GHz 9-12-10-28-1T | HD7970 @ 1200/6400
Rampage 4 Extreme | i7-3930K @ 5GHz ||| X58-A OC Orange | i7-980X @ 4.6GHz
ROFL! I apologize for my illiteracy.
I hope this is better. And if i did anything wrong please correct me.
Motherboard used: Asus R3E| VCore 1.375
Cooling: H20
Batch:3012B113
Last edited by Zaxis01; 06-29-2011 at 03:45 PM.
Under the hood:
Motherboard - MSI Big Bang Xpower
CPU - Intel Core I7 970 3.2 @ 4.4ghz/w 1.28vcore
Cooler- Intel Stock Heatsink
RAM - Gskill Trident 3x2gb @ 2100 cl9
GPU -2x Nvidia GTX 580 SLI
Soundcard - Creative xfi xtremegamer
DVDRW - LG 22x DVD RW Drive
Samsung Spinpoint f3 500gb HDD
Tower- MM Ascension CYO Brushed Aluminum
Monitor - Sony Bravia 40" LED 1080p 120hz
Keyboard - Razer Tarantula
Mouse - Logitech G5
Lynx is supposed to be running on the 21st loop.
You probably should restart an launch CPUz before anything else so you get a voltage reading. 1.57.1 should be able to show your volts.
Core i7 990x @ 4665MHz 30x155.5 | ASUS Rampage 3 Extreme 1601 Modded BIOS | 24GB (6x4GB) Mushkin Redline 999057 @ 1866MHz 8-8-8-24-1T
2x MSI N770-2GD5/OC SLI Custom BIOS @ 1228/7464 | Samsung 840 EVO 1TB | 4x 3TB WD Red Raid 5 | Corsair RM1000 | 2x Dell SP2309W 2048x1152
H2O Cooled | EK - Supreme HF Full Gold - FB RE3 | Swiftech - MCP35x2 - MCRes Micro v2 | HWLabs - 2x GTX 120 - GT Stealth 120
7x Gentle Typhoon AP-0A 2150RPM | 1x Enermax Magma UC-MA12 1500RPM | Lian Li PC-A10B | 5GHz Gulftown
1.57.1 still isn't showing voltages.
Sorry for not reading the update.
I will do another run going into the 21+ loop.
Under the hood:
Motherboard - MSI Big Bang Xpower
CPU - Intel Core I7 970 3.2 @ 4.4ghz/w 1.28vcore
Cooler- Intel Stock Heatsink
RAM - Gskill Trident 3x2gb @ 2100 cl9
GPU -2x Nvidia GTX 580 SLI
Soundcard - Creative xfi xtremegamer
DVDRW - LG 22x DVD RW Drive
Samsung Spinpoint f3 500gb HDD
Tower- MM Ascension CYO Brushed Aluminum
Monitor - Sony Bravia 40" LED 1080p 120hz
Keyboard - Razer Tarantula
Mouse - Logitech G5
You have something interfering with it. Mine works if CPUz is the first thing I start after bootup.
I'm also wondering why so little ram. 2gb on a triple channel system? See rule 3.
Last edited by zoson; 07-01-2011 at 04:51 AM.
Core i7 990x @ 4665MHz 30x155.5 | ASUS Rampage 3 Extreme 1601 Modded BIOS | 24GB (6x4GB) Mushkin Redline 999057 @ 1866MHz 8-8-8-24-1T
2x MSI N770-2GD5/OC SLI Custom BIOS @ 1228/7464 | Samsung 840 EVO 1TB | 4x 3TB WD Red Raid 5 | Corsair RM1000 | 2x Dell SP2309W 2048x1152
H2O Cooled | EK - Supreme HF Full Gold - FB RE3 | Swiftech - MCP35x2 - MCRes Micro v2 | HWLabs - 2x GTX 120 - GT Stealth 120
7x Gentle Typhoon AP-0A 2150RPM | 1x Enermax Magma UC-MA12 1500RPM | Lian Li PC-A10B | 5GHz Gulftown
My submission with my new chip:
zoson | Core i7 970 [6C 6T] @ 4611.0MHz | 1.521 | ASUS Rampage III Extreme | Water | 3018A860
100GFlops at just 4.6GHz... *FLEX*
Edit: Pics.
Last edited by zoson; 07-06-2011 at 02:09 PM.
Core i7 990x @ 4665MHz 30x155.5 | ASUS Rampage 3 Extreme 1601 Modded BIOS | 24GB (6x4GB) Mushkin Redline 999057 @ 1866MHz 8-8-8-24-1T
2x MSI N770-2GD5/OC SLI Custom BIOS @ 1228/7464 | Samsung 840 EVO 1TB | 4x 3TB WD Red Raid 5 | Corsair RM1000 | 2x Dell SP2309W 2048x1152
H2O Cooled | EK - Supreme HF Full Gold - FB RE3 | Swiftech - MCP35x2 - MCRes Micro v2 | HWLabs - 2x GTX 120 - GT Stealth 120
7x Gentle Typhoon AP-0A 2150RPM | 1x Enermax Magma UC-MA12 1500RPM | Lian Li PC-A10B | 5GHz Gulftown
batch #: 3102C246
@ zoson
141gflops at only 5100
You have AVX, I don't. =P
@ zoson
141gflops at only 5100
Core i7 990x @ 4665MHz 30x155.5 | ASUS Rampage 3 Extreme 1601 Modded BIOS | 24GB (6x4GB) Mushkin Redline 999057 @ 1866MHz 8-8-8-24-1T
2x MSI N770-2GD5/OC SLI Custom BIOS @ 1228/7464 | Samsung 840 EVO 1TB | 4x 3TB WD Red Raid 5 | Corsair RM1000 | 2x Dell SP2309W 2048x1152
H2O Cooled | EK - Supreme HF Full Gold - FB RE3 | Swiftech - MCP35x2 - MCRes Micro v2 | HWLabs - 2x GTX 120 - GT Stealth 120
7x Gentle Typhoon AP-0A 2150RPM | 1x Enermax Magma UC-MA12 1500RPM | Lian Li PC-A10B | 5GHz Gulftown
Then get with the program, man! :P
| Intel 2500K @ 5GHz | Noctua NH-D14 | Asus P67 Sabertooth | Samsung 2x4GB DDR3 @ 2133 MHz | Crucial M4 256GB | Asus GTX 770 OC | OCZ Fatal1ty 750W | Qnix QX2710
History: AXP-2400M, AXP-2500M, Core2 E6600 - all minimum 50% overclock
my 4.6Ghz LinX stable entry
pet168 | Core i3 540 [2C 4T] @ 4615mhz | 1.440 | ASUS Maximus III GENE| Air | 3039B092
Uploaded with ImageShack.us
update:
pet168 | Core i3 540 [2C 2T] @ 4937mhz | 1.544 | ASUS Maximus III GENE| Air | 3039B092
Uploaded with ImageShack.us
Last edited by pet168; 07-03-2011 at 06:01 AM.
Posting Permissions
Reply With Quote
Bookmarks