***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[l0ud_sil3nc3]

has anyboday used F5a yet?

F4a was very unstable, constant bsod 124

I can't believe that there has not been one decent bios released for this board yet, I am on F3h and it is ok but all of the bios need work imho.

[jacek]

F5a , for ud7?
where can I download it?

I can't believe that there has not been one decent bios released for this board yet, I am on F3h and it is ok but all of the bios need work imho.

I agree, gigabyte support suck!

[andressergio]

has anyboday used F5a yet?

F4a was very unstable, constant bsod 124

I can't believe that there has not been one decent bios released for this board yet, I am on F3h and it is ok but all of the bios need work imho.

yes hard to believe from gigabyte sitck with F3H best so far...

[andressergio]

do u guys use turbo boost when OC ? i never touched it its still enabled...

[Fatbird]

BIOS rule... the POST will display the highest clock configured in BIOS (including turbo ratio).

[zsamz_]

yes hard to believe from gigabyte sitck with F3H best so far...

i told you all gigabut gonna slack off on bios support lol

hopefully they get their heads out of the sand by the time i get back my board from rma
but i doubt it

[Dumo]

So far F4 been good to me

Imo, its all depend on how good your Sandy is

As long as bios boot at 100 BCLK and cpu's max multi then ramped up with easy tune to cpu max. mhz.

Reboots with C1 twice still happened often, but it will post windows after a few try

This went all night long

[andressergio]

So far F4 been good to me

Imo, its all depend on how good your Sandy is

As long as bios boot at 100 BCLK and cpu's max multi then ramped up with easy tune to cpu max. mhz.

Reboots with C1 twice still happened often, but it will post windows after a few try

This went all night long

amazing chip Dumo !

[Sauron_Vie]

So far F4 been good to me

Imo, its all depend on how good your Sandy is

As long as bios boot at 100 BCLK and cpu's max multi then ramped up with easy tune to cpu max. mhz.

Reboots with C1 twice still happened often, but it will post windows after a few try

This went all night long

cheek 5,5Ghz@1,45vcore I think you want me to sell this one

great chip buddy

[jbkappirossi]

Wow Dumo, and i thought that i had a high binned one.
Now try 8 threads and LinX with AVX I'am curious what you're chip does than.
I squeez't this out today, gonna do a 20 run for the linx stable club later.

[stasio]

GA-Z68X-UD7-B3 - F7h

-Fix Touch BIOS
-16.Jun 11

CPU-Z 1.58 Beta

http://www.fileden.com/files/2010/4/...-32bits-en.zip

- AMD FX "Bulldozer" processors family.
- Intel Sandy Bridge-EP processors preliminary support.

Edit:
Still bug ,
show VTT voltage on Gigabyte Z68X-UD7 (maybe new BIOS?).

[stasio]

All Z68 series official BIOS updated.

CPU-Z 1.58

ftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-setup-en.exe
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-32bits-en.zip
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-64bits-en.zip

- AMD FX "Bulldozer" processors family (K15).
- AMD Llano processors family (K12).
- Intel Sandy Bridge-EP processors preliminary support.

[Devil_Dog]

GA-Z68X-UD7-B3 - F7h

-Fix Touch BIOS
-16.Jun 11

CPU-Z 1.58 Beta

http://www.fileden.com/files/2010/4/...-32bits-en.zip

- AMD FX "Bulldozer" processors family.
- Intel Sandy Bridge-EP processors preliminary support.

Edit:
Still bug ,
show VTT voltage on Gigabyte Z68X-UD7 (maybe new BIOS?).

All Z68 series official BIOS updated.

CPU-Z 1.58

ftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-setup-en.exe
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-32bits-en.zip
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.58-64bits-en.zip

- AMD FX "Bulldozer" processors family (K15).
- AMD Llano processors family (K12).
- Intel Sandy Bridge-EP processors preliminary support.

Any love for P67's?

Would be nice. Haven't seen a damn thing for them since Z68's came out.

Any way thanks stasio.

[cole2109]

Passed 5651Mhz....Next, if it passed 5705Mhz then it is 57X or more

[sin0822]

If the reboot is instant you fried your CPU (1-2 secs)...

that isn;t totally true, there is this boot loop that will restart after less than 1 sec, and then it keeps going. you gotta pull out teh 24 pin connector and clear CMOS and then it works fine.

[l0ud_sil3nc3]

very nice work, that is a great chip, max multi x57

and great memory speed/timings. keep it up.

[Dumo]

This "forgotten" UD7 B3 stuck with F4 bios. Lol

Even with those new Z68 boards stole the limelight, its still going



Have to dust off my old 4890 top...

[Dumo]

One more run before gpu go cold...Gotta chase that E8600 @6.5Ghz!

[OC Nub]

Almost there, nice run.

[Dumo]

Thanks Tom

Got it with CF

Next will be 1X 5870...chase that MIVE @ #1

[l0ud_sil3nc3]

Thanks Tom

Got CF run...almost beat my GTX 580 SLI run..

2220 6-9-6

great job and killer chip, so close to 59xx

[kagula323]

Thanks Tom

Got it with CF

Next will be 1X 5870...chase that MIVE @ #1

great run dummo

wish I had a nice cpu like that ... in fact I'd me more than happy with a x55-x57 chip ... but luck was not on my side this time

keep up the great work

[Dumo]

2220 6-9-6

great job and killer chip, so close to 59xx

Thanks L_S
Probly maxed for this ram and so far 5850Mhz 4C/4T for this chip under SS....it won't run Vantage cpu and wprime 4C/8T @ max. wall though
More cold probly help, but I doubt it

great run dummo

wish I had a nice cpu like that ... in fact I'd me more than happy with a x55-x57 chip ... but luck was not on my side this time

keep up the great work

Thanks kagula, its pure luck and quantity really help


Testing '05 4890 CF

No bios refresh, still F4, probly Giga can pull a MIVE ones...New P67 UD7-B3 bios specifically for '01

[OC Nub]

Great score Dumo! GT1 and GT2 scores are awesome.

[kagula323]

Thanks L_S
Probly maxed for this ram and so far 5850Mhz 4C/4T for this chip under SS....it won't run Vantage cpu and wprime 4C/8T @ max. wall though
More cold probly help, but I doubt it

Thanks kagula, its pure luck and quantity really help


Testing '05 4890 CF

No bios refresh, still F4, probly Giga can pull a MIVE ones...New P67 UD7-B3 bios specifically for '01

http://img840.imageshack.us/img840/5...enshot049a.jpg

sick score man! great work!