***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[sin0822]

haha whats he doing running prime95. for 48 hours at 5.8ghz and 1.6v? LOL

[cowie]

he he i have a knack for finding weakness in a mb
1200w pcp&c psu which works fine and i dont use a case

pins are ok not burnt only 1.64v real, it did die when on dice thuo ...other chip same results

i have another one coming early next week,this way i can have 1 for not benching too.

[the_real_7]

Cowie does not understand the meaning of the word stability test... we are benchers mate... 5.6Ghz and beyond... less is not interesting...

you must of misunderstood , im saying that even with me priming the board with torture test like i do it has never gone bad . . . very strong board

[Leeghoofd]

don't think you are pushing +106 bclocks, 5.7Ghz and 2240CL7-7 rams during hours... it's strong board no problem with that and very good for 01 benching, but I prefer UD5 as it's far better bang for the buck...

[the_real_7]

don't think you are pushing +106 bclocks, 5.7Ghz and 2240CL7-7 rams during hours... it's strong board no problem with that and very good for 01 benching, but I prefer UD5 as it's far better bang for the buck...

pushing +106 bclocks, 5.7Ghz and 2240CL7-7 rams during hours damn lol that will do it . . ud5 is a great board also and definitely better bang for the buck . . . like the old gigabyte ga-x58a-ud3r . . . just wished it had more sata ports

[andressergio]

leeg u r and assus lova what are you doing with a nice giga board

[Leeghoofd]

I have 3 here UD5/7 and UD3H. I love Gamers UD5 and PJ's Z68 UD3H (both very very good bang for the buck and solid solutions)
I even might give them an award ( if ever Dino accepts me on his facebook page :p ) Sadly there's no hyper love on the UD3H (but I can live with that)

Oh and I have to correct you on your quote :

leeg u r and ASSES lova what are you doing with a nice giga board

[the_real_7]

leeg u r and assus lova what are you doing with a nice giga board

he wanted to join to join the giga team so he could say " DUH! WINNING! "

[andressergio]

i have 3 here ud5/7 and ud3h. I love gamers ud5 and pj's z68 ud3h (both very very good bang for the buck and solid solutions)
i even might give them an award ( if ever dino accepts me on his facebook page :p ) sadly there's no hyper love on the ud3h (but i can live with that)

oh and i have to correct you on your quote :

guess its

Originally Posted by andressergio
leeg u r and A*Sucks lova what are you doing with a nice giga board

[cole2109]

Next step XP

57× boot

http://www.youtube.com/watch?v=OzlPrUJml-Y

[sin0822]

that is a nice CPU, i need one of em

[l0ud_sil3nc3]

guess its

Originally Posted by andressergio
leeg u r and A*Sucks lova what are you doing with a nice giga board

maybe you should try the Asus on this go around, they really did a good job this time

The R3E left a bad taste in mouth as well, unlike any of the Giga X58 boards ( UD3R, UD5, UD7), however Asus got their shi(f)t together for P67/Z68 (except for 01) and has very nice board. I do think that the bios on the UD7 is better for hyper based memory the the MIVE. The main thing I dislike about the UD7 is the llc is completely botched, I mean ten levels and still nothing works as it should

Regardless I may pull it out of the box once I get some more cpu's, but as it sits it's just collecting dust, because it kills it in 01

[Dumo]

Regardless I may pull it out of the box once I get some more cpu's, but as it sits it's just collecting dust, because it kills it in 01

Probly not only '01....All 3Ds

[Dumo]

Next step XP

57× boot

Passed 5651Mhz....Next, if it passed 5705Mhz then it is 57X or more

[zsamz_]

maybe you should try the Asus on this go around, they really did a good job this time

The R3E left a bad taste in mouth as well, unlike any of the Giga X58 boards ( UD3R, UD5, UD7), however Asus got their shi(f)t together for P67/Z68 (except for 01) and has very nice board. I do think that the bios on the UD7 is better for hyper based memory the the MIVE. The main thing I dislike about the UD7 is the llc is completely botched, I mean ten levels and still nothing works as it should

Regardless I may pull it out of the box once I get some more cpu's, but as it sits it's just collecting dust, because it kills it in 01

gigabut finally rmaed my b2 board

when i comes back bye bye gigabut hello MIVE

llc is pure crap

[Dumo]

1.54Vcore bios and LLC10 boot up to windows all the time

[Linuxfan]

1.54Vcore bios and LLC10 boot up to windows all the time

Beautiful chip

[OC Nub]

1.54Vcore bios and LLC10 boot up to windows all the time

Nice run Dumo

[the_real_7]

Nice chip Dumo , and especialy you got working with that 1 10 llc.

[devil_mcry]

about vrm frequency, someone has try to set it?

how many volt can u get out with a correct vrm frequency?

[andressergio]

1.54Vcore bios and LLC10 boot up to windows all the time

AMAZING chip Dumo congrats

[nugzo]

anyways I couldn't change the title, i have the Z68X-UD7 and a UD3H, maybe ill just make a general Z68 GB club?

Please do. I cant believe we dont have one already. My UD7 is looking for some knowledge... Coming from EVGA X58, Z68X looks foreign..

[Dumo]

Beautiful chip

Probly need more cold to open up

Nice run Dumo

Thanks OC

Nice chip Dumo , and especialy you got working with that 1 10 llc.

Yep, LLC10 work nicely @ >5.7ish

AMAZING chip Dumo congrats

Thanks Sergio

Got this cold bugged L047XXXX chip max @ 5140Mhz. Bios 1.375Vcore LLC7. Linx tortured my SS instead of the chip...

[l0ud_sil3nc3]

@ Dumo

sick cpu bud

you are torturing your ss, almost 15c

[nugzo]

I see everybody is using 4gb ram. Anybody using 16gb that could give me some pointers? I have the Mushkin Enhanced Redline (4 x 4GB) DDR3 2133 (PC3 17000) 1.65v
Just got my board and chip friday so i am still learning this z68 (coming from x58).The mem was running fine using profile1 which sets it at 2133 1.65v 9-10-9-25 cr2. i backed it down to 1866 for now so i could concentrate on finding my max 24/7 cpu settings, then i'll come back for the memory. What voltages should i be playing with on this board for the cpu? (z68x ud7) Anybody using touch bios? Also what is dangerous as far as temp and cpu voltage for 24/7 use? If somebody knows of a good OC guide for the z68, that would help a lot too. not sure what cpu settings should be enabled and disabled. Disable c1e, c3/c6, EIST, Thermal Monitor, Bi Directional PROCHOT? TIA for the help. I really appreciate it.