***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[Dumo]

F4 2001

CPU core temp. load @ -1C. Lol

[sin0822]

i need a nice CPu like that!

[andressergio]

mi new spi pushing a bit



Uploaded with ImageShack.us

[vodka3dg]

1.57v on a 32nm chip, that must be sergio

dude u crazy!!!!

try a wprime for next time

[andressergio]

1.57v on a 32nm chip, that must be sergio

dude u crazy!!!!

try a wprime for next time

yeah thanks mate

[the_real_7]

wow very nice and vcore is still nice for speed Sergio MAKE THAT 2600K SCREAM . . .

[dazboots]

Just recieved my board and got it all up and running on water.
this board has f6 bios and 10 load line cal settings.
got a 2600k what would u ppl do to hit 4.6 ghz 24-7 stable.
not used to this board had a asus p8p67 deluxe board before.
and what llc setting would be best form 1 to 10.
thx in response

[andressergio]

decided to do some benches on my stable 24/7 clocks

I2600K@ 5GHz HT
Mushkin Redline Ridg. 2133 C9 2x4GB
2x EVGA 570 vid 0,95 both@ 950/2200


3DM03



3DM05



3DM06



3DM11




cheers to all
Sergio

[andressergio]

wow very nice and vcore is still nice for speed Sergio MAKE THAT 2600K SCREAM . . .

im on it my friend just upping my little point contribution to my xtremesystems team not too much as i dont bench xtreme and im alone but will do the job im 4th in my country but the 3 above are like 10 ppl putting scores togheter



Uploaded with ImageShack.us

[Falkentyne]

Just recieved my board and got it all up and running on water.
this board has f6 bios and 10 load line cal settings.
got a 2600k what would u ppl do to hit 4.6 ghz 24-7 stable.
not used to this board had a asus p8p67 deluxe board before.
and what llc setting would be best form 1 to 10.
thx in response

LLC between 5 and 7 are the only ones worth using, but LLC6 still has some droop at high load, and while LLC7 doesn't have that droop, both LLC6 and LLC7 have erratic voltage spikes, sometimes going as much as 0.030v higher than what you set in BIOS, at *light* load.

[jackbrennan2008]

I got my GA-P67A-UD7-B3 board back now, finally. I have tried to overclock with the latest BIOS F4 from Gigabytes website, but it won't boot at anything past 4.9Ghz. I then flashed F3H and i was able to overclock back up to 5.5Ghz and run a few benchmarks. Otherwise the board seems pretty good.

Just a quick question though: is LLC Level 2 a bad idea for a 24/7 overclock?

My previous overclock was 4.5Ghz with 1.285v set in BIOS with LLC level 2, but some people have been saying your shouldn't use LLC Level 2 for a 24/7 overclock.....??

[Falkentyne]

You couldn't do past 4.9 ghz ? Sounds like PLL Overvoltage wasn't working ....

[jackbrennan2008]

You couldn't do past 4.9 ghz ? Sounds like PLL Overvoltage wasn't working ....

It was strange. It always booted and came to the windows is loading screen and froze. I set the PLL manually so i dont know what was wrong.

Sent from my HTC Vision using Tapatalk

[Falkentyne]

I noticed you said you used F4.
Someone with a UD4 board said F4 wouldn't overclock his chip past 4.4 ghz unless he raised VTT to 1.2v and adjusted VCCSA up slightly. He went back to F3D (or F3B?) and he was back up to 4.8 ghz on all auto voltages (besides vcore).

I know PLL overvoltage worked fine on UD5 on both F3 and F5, but there definitely seem to be issues with F4......

[Lsdmeasap]

Can do 5Ghz+ here no problem with F4 BIOS, and don't need anymore Vtt than any other BIOS (Stock or lower depending on memory), nothing wrong with it at all as far as I have seen.

[zsamz_]

Can do 5Ghz+ here no problem with F4 BIOS, and don't need anymore Vtt than any other BIOS (Stock or lower depending on memory), nothing wrong with it at all as far as I have seen.

i should try it to prove you wrong lol

2 guys sayin not as stable as f3h so far

[Dumo]

F4 no problem at all here

[OC Nub]

I have flashed to f4 2 times and spent a couple hours trying it but was unable to do the same clocks for benching as before. I tried all the llc's 1-10 but have trouble getting into windows at 5600mhz, not sure how good it is for 24/7 stability, Im taking a break from linx and blend. I finally gave up on f4 and went back to f3h, maybe its my settings that are wrong idk

[cole2109]

mi new spi pushing a bit



Uploaded with ImageShack.us

Cooling?

[andressergio]

Cooling?

water single loop

[cole2109]

Damn
Load temperature?

[andressergio]

Damn
Load temperature?

a for that its 45+ i think didnt try load prime it will fail, i will need some more vcore for SPI32

[the_real_7]

yes true that OC Nub i spent hours on new bioses and so real 7 and leads to nowhere, no stability and not the same clocks, on ma B2 crossflashed to B3 F3H working as a charm

cheers !
Sergio

I haven't tried newest bios , but i tried beta bios after F3H was like playing with a rubiks cube with its llc 1 10 voltages . . . wish giga do more like asus on the llc part . . . think Ill stick here untill there a new bios im forced to jump on

[andressergio]

I haven't tried newest bios , but i tried beta bios after F3H was like playing with a rubiks cube with its llc 1 10 voltages . . . wish giga do more like asus on the llc part . . . think Ill stick here untill there a new bios im forced to jump on

i will take this F3H as last bios

[Lsdmeasap]

There's a BIG surprise incoming, get ready!!