i5-2500K/2600K batch number and o/c results

[Falkentyne]

But this does NOT happen at 4.4 ghz? (and it does not happen on Prime blend @ 4.5 ghz?)

Something's wrong...VCCIO is supposed to affect memory, and small FFT tests the CPU and cache...

[Demo]

But this does NOT happen at 4.4 ghz? (and it does not happen on Prime blend @ 4.5 ghz?)

Something's wrong...VCCIO is supposed to affect memory, and small FFT tests the CPU and cache...

I havent tested it at 4.4Ghz, actually I when I got my mobo UD4-B3 i went with F4 bios right away. 2 chips wont budge at 4.5Ghz unless VTT is 1.1 A friend of mine with the same setup went with F3B and has 4.7Ghz on all auto. So I tried F3B and left everything in all auto and just removed the power saving thing. So far its been running smallFTT for the last 15mins fine.

[Ace.]

if anyone is interested in my good CPU... PM

[noobzed]

if anyone is interested in my good CPU... PM

you got pm :o

[little_scrapper]

if anyone is interested in my good CPU... PM

ACE,

I have the same board and chip. I would like a list of your bios settings. I was able to do twenty rounds of LinX at 5.0Ghz at about 1.40vcore but cant get it stable any higher even with much more vcore and after that my cooling cannot handle any more it seems

[Ace.]

ACE,

I have the same board and chip. I would like a list of your bios settings. I was able to do twenty rounds of LinX at 5.0Ghz at about 1.40vcore but cant get it stable any higher even with much more vcore and after that my cooling cannot handle any more it seems

Here my settings for 5Ghz
for over 5 Ghz i go to LLC 75%,Phase Controll to extreme,VCCSA 0.950V,VCCIO 1.1V,PLL 1.8V and the rest the same on my screen.

[zsamz_]

3102c187 max multi 54