Asus Rampage IV Formula X79 | EK-MOSFET ASUS RF4 - Acetal Copper
Core i7-3630K@4.5GHz 1.4V | EK-Supreme HF - Full Copper
G.Skill 16GB Quad Kit Ripjaws Z (4x4GB), DDR3 1600MHz, CL 9
EVGA GTX TITAN SC | EK-FC Titan SE Copper - Plexi Full Cover | EK-FC Titan SE Backplate
Corsair AX1200i
Samsung 256gb 830
Intel SSD 160GB X25-M G2
I just ordered so I'll be contributing soon!
Sabertooth Rev3.0
2500k
G.Skill Ripjaw 2x2GB DDR31600
EVGA Superclocked GTX560 Ti
I'll be starting on OEM air and will probably venture my way to water after a few months.
I also have access to dice, LN2, and phase change at work...
Last edited by dr_sharp; 04-30-2011 at 09:00 AM.
| Intel 2500K @ 5GHz | Noctua NH-D14 | Asus P67 Sabertooth | Samsung 2x4GB DDR3 @ 2133 MHz | Crucial M4 256GB | Asus GTX 770 OC | OCZ Fatal1ty 750W | Qnix QX2710
History: AXP-2400M, AXP-2500M, Core2 E6600 - all minimum 50% overclock
ok i just optimized my system
llc from ultra high to high
offset from +0.02v to +0.04v
now my cpu runs stable with 1.344v min under prime95 and 1.352v under Linx (26.6 and last linpack)
my personal opinion about LLC, it's very ridiculous
i see only 1 difference between ultra high and high, and it's the overshoot
with ultra high i can estimate +0.03v respect high
therefore if i want keep the same vcore with high, i must only set +0.03 V on offset setting
this isn't a llc -.-
i'm not sure but i see that there are the same overshoot between idle and full
what do u think about it?
i7 4770k @ 4.4GHz | MSI MPower | 8gb Geil Evo Corsa 2133 | Gigabyte GTX670 wf3 | Samsung 830 256gb | 3xWd Re3 raid5 | Antec HCG 620w
Θ Core i7 4770k 4.4ghz 1.3v :'( Θ Core i7 2600k 4.5ghz 1.344v Θ E8400 500x8 4ghz 1.36v Θ Core i7 860 @ 4ghz 1.328v Θ Turion M500 2.2ghz 1.025v Θ Phenom II 955 c3 3.91ghz 1.52v Θ Phenom II 545 3.77ghz 1.47v Θ
_~{ ALL RS }~_
What you are describing is not overshoot. And yes, it is generally understood that as LLC is lowered base VCORE will need to be increased to maintain the same loaded VCORE.
Hmm, seems like that offset voltage is useless. Cant get prime stable even at stock with offset, have to use manual mode. LLC works fine in my opinion.
That is strange, offset is fine for me. You using latest BIOS?
MB Reviewer for HWC
Team OCX Bench Team
Really? Yeah i have latest bios 1502. I get ALWAYS an fatal error in prime, im getting really pissed here.
Edit: should have believed it was my fcking memory, failed right away when i tried individually. Getting some new ram tomorrow puuh..
Last edited by silis; 05-03-2011 at 09:55 AM.
anyone here have opportune to take mosfet cooling off and measure its base like this
Asus Rampage IV Formula X79 | EK-MOSFET ASUS RF4 - Acetal Copper
Core i7-3630K@4.5GHz 1.4V | EK-Supreme HF - Full Copper
G.Skill 16GB Quad Kit Ripjaws Z (4x4GB), DDR3 1600MHz, CL 9
EVGA GTX TITAN SC | EK-FC Titan SE Copper - Plexi Full Cover | EK-FC Titan SE Backplate
Corsair AX1200i
Samsung 256gb 830
Intel SSD 160GB X25-M G2
For watercooling mosfets ofc
http://www.koolance.com/product_wizard/mvr_help.php
Asus Rampage IV Formula X79 | EK-MOSFET ASUS RF4 - Acetal Copper
Core i7-3630K@4.5GHz 1.4V | EK-Supreme HF - Full Copper
G.Skill 16GB Quad Kit Ripjaws Z (4x4GB), DDR3 1600MHz, CL 9
EVGA GTX TITAN SC | EK-FC Titan SE Copper - Plexi Full Cover | EK-FC Titan SE Backplate
Corsair AX1200i
Samsung 256gb 830
Intel SSD 160GB X25-M G2
OK, they do get very hot when overclocking. My sensors on the Sabertooth indicate very high temp when benching on vcore1 and 2. I added a fan and now they stay in the 30s
2600k@4800mhz 1.4Vcore
Radeon HD4870
Asus P67 Sabertooth
2 X Corsair Vengence DDR3 (2X4) 9-9-9-24
Hauppauge TV
Corsair Hydrocool200 EX
Main drive Crucial C300 SSD.
PWS: Seasonic Gold X 850W
i7 4770k @ 4.4GHz | MSI MPower | 8gb Geil Evo Corsa 2133 | Gigabyte GTX670 wf3 | Samsung 830 256gb | 3xWd Re3 raid5 | Antec HCG 620w
Θ Core i7 4770k 4.4ghz 1.3v :'( Θ Core i7 2600k 4.5ghz 1.344v Θ E8400 500x8 4ghz 1.36v Θ Core i7 860 @ 4ghz 1.328v Θ Turion M500 2.2ghz 1.025v Θ Phenom II 955 c3 3.91ghz 1.52v Θ Phenom II 545 3.77ghz 1.47v Θ
_~{ ALL RS }~_
mine hits 82'c+ after awhile when running linx with 1.5v+
Asus Rampage IV Formula X79 | EK-MOSFET ASUS RF4 - Acetal Copper
Core i7-3630K@4.5GHz 1.4V | EK-Supreme HF - Full Copper
G.Skill 16GB Quad Kit Ripjaws Z (4x4GB), DDR3 1600MHz, CL 9
EVGA GTX TITAN SC | EK-FC Titan SE Copper - Plexi Full Cover | EK-FC Titan SE Backplate
Corsair AX1200i
Samsung 256gb 830
Intel SSD 160GB X25-M G2
uhm my sabertooth shows 64 v1, 60° v2 after 6 hours of stress test, under Linx (with last linpack) but at 1.39v
i don't know how many °, but i know that is the normal with 1.50v under linx, however, there are 2 considerations
first, power mosfet can support 100+° (like 125, but depend from model) without isseu, you can see the tipical temp range of vga vrm ...
second, this sensors aren't under vrm, but between vrm and cpu, i'm sure that the pcb is heated by the cpu...
i7 4770k @ 4.4GHz | MSI MPower | 8gb Geil Evo Corsa 2133 | Gigabyte GTX670 wf3 | Samsung 830 256gb | 3xWd Re3 raid5 | Antec HCG 620w
Θ Core i7 4770k 4.4ghz 1.3v :'( Θ Core i7 2600k 4.5ghz 1.344v Θ E8400 500x8 4ghz 1.36v Θ Core i7 860 @ 4ghz 1.328v Θ Turion M500 2.2ghz 1.025v Θ Phenom II 955 c3 3.91ghz 1.52v Θ Phenom II 545 3.77ghz 1.47v Θ
_~{ ALL RS }~_
Guys, got a new ram today, couldnt be happier! Ram works like a dream XMP and everything, i'll post some prime95 blend pics tomorrow, let it run at least 8hrs ! I'm so excited, i'm maybe going to buy an i7 2600k.
@i5 2500k / 4,5ghz,Vcore 1.32 - Sabertooth P67 B3(1502 BIOS), 8GB Ripjaws X 1600mhz CL9, HD 6950 2GB(unlocked shaders), Noctua NH-C12P SE14, (NH-C14) and Arctic Silver 5 arrives friday.
Love you all
Asus Rampage IV Formula X79 | EK-MOSFET ASUS RF4 - Acetal Copper
Core i7-3630K@4.5GHz 1.4V | EK-Supreme HF - Full Copper
G.Skill 16GB Quad Kit Ripjaws Z (4x4GB), DDR3 1600MHz, CL 9
EVGA GTX TITAN SC | EK-FC Titan SE Copper - Plexi Full Cover | EK-FC Titan SE Backplate
Corsair AX1200i
Samsung 256gb 830
Intel SSD 160GB X25-M G2
lol it's possible
or it's bugged the thermal radar software lol, for my experience the ai suite 2 it's very unstable and bugged
i7 4770k @ 4.4GHz | MSI MPower | 8gb Geil Evo Corsa 2133 | Gigabyte GTX670 wf3 | Samsung 830 256gb | 3xWd Re3 raid5 | Antec HCG 620w
Θ Core i7 4770k 4.4ghz 1.3v :'( Θ Core i7 2600k 4.5ghz 1.344v Θ E8400 500x8 4ghz 1.36v Θ Core i7 860 @ 4ghz 1.328v Θ Turion M500 2.2ghz 1.025v Θ Phenom II 955 c3 3.91ghz 1.52v Θ Phenom II 545 3.77ghz 1.47v Θ
_~{ ALL RS }~_
Vcore 1.40 and mine will reach the 80C also. With one small fan on each heatsink and thay stay in the 30s
2600k@4800mhz 1.4Vcore
Radeon HD4870
Asus P67 Sabertooth
2 X Corsair Vengence DDR3 (2X4) 9-9-9-24
Hauppauge TV
Corsair Hydrocool200 EX
Main drive Crucial C300 SSD.
PWS: Seasonic Gold X 850W
i just got 1 for the kid
whats best bios so far
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
1502
Nothing anymore
there are difference in oc between 13xx and 15xx bios like on p8p67?
i7 4770k @ 4.4GHz | MSI MPower | 8gb Geil Evo Corsa 2133 | Gigabyte GTX670 wf3 | Samsung 830 256gb | 3xWd Re3 raid5 | Antec HCG 620w
Θ Core i7 4770k 4.4ghz 1.3v :'( Θ Core i7 2600k 4.5ghz 1.344v Θ E8400 500x8 4ghz 1.36v Θ Core i7 860 @ 4ghz 1.328v Θ Turion M500 2.2ghz 1.025v Θ Phenom II 955 c3 3.91ghz 1.52v Θ Phenom II 545 3.77ghz 1.47v Θ
_~{ ALL RS }~_
Havent tried the 13xx bios but I know that 1502 bios works great for OC. Im finishing up a review of this board this week, Ill post a link when it goes live.
MB Reviewer for HWC
Team OCX Bench Team
maximus IV extreme gtx580
gigabut p67-ud7
p67 sabertooth
2500k+2600k
antec 1200watt
EVGA classified 760
920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
OCZ3RPR1866LV6GK hypers
dfi ut p35 rampage extreme
gigabut p35c-ds3r bios suks
gigabut x38-d6q dead thank god
ballistix 8500 1240mhz@2.02v
Bookmarks