cinebench 11.5

[jeremyshaw]

I think his uncore/NB speeds are higher? I cannot see from your 2010 screencap

[richierich]

840T Unlocked to X6 (Has a worthless NB though, will have to try my Ecos later to see if that helps)

[ReKcOlNu]

@ FlanK3r - X4-975 takes #2 spot in quad cores, Nice going! [#1 on air ]

@ richierich - Unlocked to X6 , Awesome! What that chip cost you?

[FlanK3r]

today later I go at 1100T, maybe is a little chance at my record

[richierich]

@ richierich - Unlocked to X6 , Awesome! What that chip cost you?

Got a good deal, traded nook color for two 840Ts. This one is the better one for obvious reasons.

[felix_w]

Well, this is mine with my new 1100T (1105MPM) :

[rouge]

This is my final 24/7 overclopck for this system. I've had this processor since November and the honeymoon's over I'm not babying it anymore.




cpu 1.476v, nb 1.225v, dram 1.5v

[I.nfraR.ed]

1090T@5015MHz
8.86pts
Windows 7 Ultimate x64
Dry Ice

[AMDnord]

~6 month old score. 1090T on cascade.

[FlanK3r]

very nice!

[Lightman]

You guys on cascade/DI are getting dangerously close to upcoming Zambezi stock scores there


Great work!

[FlanK3r]

I hope so ...It will be mega fun with this incoming chips

[AMDnord]

i hope too^^

i ll find some time from work + i need to fix my cascade and try again. it will run higher but iirc i was trying to match some leaked scores from SB :p

[I.nfraR.ed]

Yeah, I had limited amount of DICE left, should try run higher next time. The CPU should be capable, considering the "low" vCore.

[FlanK3r]

x6 1100T BE, LN2 cooling, we had only one try with last a few LN2, 8.75p
x6100tbe4966mhzr115875b.jpg

[BeepBeep2]

Why are clocks so low and single channel?

FlanK3r, I think you are the only person that benches Cinebench on LN2 XD

[FlanK3r]

we have only a bit LN2 at the end, so it was only for one safe setings. With single RAM, I dont know, maybe one RAM frozed? I had two kits for this benchmark. If will be time and LN2, for next week Il test x4 975BE Cinebench too (first validation and superpi)

[ReKcOlNu]

x6 1100T BE, LN2 cooling, we had only one try with last a few LN2, 8.75p
x6100tbe4966mhzr115875b.jpg

Only 8.75? Seems a tad low for LN2, I would expected it to at least beat I.nfraR.ed's 8.86 on DICE.

[FlanK3r]

I would not risk some bluescreen or restart...We had for this maybe only 1/3 of thermos. Its not much!

[Sheik]

Here are my results. By default it selects 32 threads on this 48 Core AMD Opteron setup.

Score is 16.37 points

Cinebench 32 Threads.jpg

If I manually set the thread count to 48 threads I get 21.6 points

Cinebench 48 Threads.jpg

Everything at stock speeds.

IMAG1439.jpg

[wez]

Here are my results. By default it selects 32 threads on this 48 Core AMD Opteron setup.

These things are always fun to see

[FlanK3r]

nice PC system

[ReKcOlNu]

If I manually set the thread count to 48 threads I get 21.6 points

Nice! Talk about going off the charts!

BTW, It's about time someone posted a score, I almost forgot how to update the score charts!
P.S. Still waiting on Bulldozer scores!

[Sheik]

Did a few BIOS tweaks. Enabled node interleaving. Seems Cinebench is not too NUMA friendly.

New score

Cinebench2.jpg

PS - check out the MP Ratio Score as well

[Lightman]

That's a great MP scaling!
Now go and upgrade to 6200 Opterons when they released Should be hard to beat MP ratio you're getting due to Turbo Core but total score will rock!