***Official*** Asus Sabertooth P67 Club/Discussion/Info!**

[newls1]

You where correct... internal PLL overclock has to be disabled. It now sleeps just fine and runs great at 4800.... idles at 1600... very happy.
Will try 5000 soon.

I **HIGHLY** doubt you will get 5GHz with "internal PLL" disabled, you will mostly likely 110% need PLL "ENABLED" to achieve that goal

[Badge56]

I **HIGHLY** doubt you will get 5GHz with "internal PLL" disabled, you will mostly likely 110% need PLL "ENABLED" to achieve that goal

Well you are correct. tried 1.5Vc and freezes in Windows. Going to enable the internal PLL overclock and bench over 5000, I am sure but going 24/7 at 4800 and sleep working :-)

[M31]

I'm considering this board for a build in a month or so, will be using a 2600k.

Am I right in thinking its only got 1x 16 lane PCI-e 2.0 slot? I have one GTX570 SC but want to buy one more for SLI, would it be better off with another board that can do 2 x 16 lane PCI-e 2.0 slots or is it no big deal dropping to 8 lane?

Otherwise board looks fine to me.

[Mobsters]

I'm considering this board for a build in a month or so, will be using a 2600k.

Am I right in thinking its only got 1x 16 lane PCI-e 2.0 slot? I have one GTX570 SC but want to buy one more for SLI, would it be better off with another board that can do 2 x 16 lane PCI-e 2.0 slots or is it no big deal dropping to 8 lane?

Otherwise board looks fine to me.

I am running GTX480 SLI (2560x1600 res) with this board and i haven't noticed any performance difference to X58 MB with 2x16 lanes with same res

[M31]

I am running GTX480 SLI (2560x1600 res) with this board and i haven't noticed any performance difference to X58 MB with 2x16 lanes with same res

Thanks, I'll be giving the Sabertooth some serious consideration

[devil_mcry]

ok i just optimized my system

llc from ultra high to high
offset from +0.02v to +0.04v

now my cpu runs stable with 1.344v min under prime95 and 1.352v under Linx (26.6 and last linpack)

my personal opinion about LLC, it's very ridiculous

i see only 1 difference between ultra high and high, and it's the overshoot

with ultra high i can estimate +0.03v respect high

therefore if i want keep the same vcore with high, i must only set +0.03 V on offset setting

this isn't a llc -.-

i'm not sure but i see that there are the same overshoot between idle and full

what do u think about it?