***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[the_real_7]

F3 bios erratic !! having to eat my words when i said F3 was the best bios . . now i cant even believe gigabyte posted as official bios , but i would have to believe cause they follow this forum , after testing for a week now and only get by processor to run 1.464 idle and 1.440 load with any llc vs vcore combo at 4.8 with a raised vdimm and vtt voltage , I was thinking damn chip degradation from priming so much . . so i went back to f3h and starting my overclock aging on my board from scratch . . back to 1.452 idle and 1.416 load at 4.8 lower temp and even longer prime runs now . . happy my chip is running like new , and Ive run some of the longest prime runs . . be careful with your bios revisions and test test test , I have to give F3 a bad mark in not having a standard in voltages and fluxing to much across the board

[the_real_7]

i got a dead hd for my b2 troubles lol

gonna rma the board now and the wd black

DAMN zsams you have the worst luck with these boards lol . . My b2 was actually working like a champ on all my satas, and thats with getting slammed with streaming in my house to my tvs and torrent it to death lol , but guess that why intel is taking such a pricey kick in the ass with this . . hopefully soon you get another board dude

[zsamz_]

DAMN zsams you have the worst luck with these boards lol . . My b2 was actually working like a champ on all my satas, and thats with getting slammed with streaming in my house to my tvs and torrent it to death lol , but guess that why intel is taking such a pricey kick in the ass with this . . hopefully soon you get another board dude

well its official
every chipset gigabut has made in the past5 years has died in my hands

whats funny is that i havent killed any other board

just my gigabut luck
if i gotta wait a month or 2 for rma i gonna rant n buy a sata2 pci-e card

[l0ud_sil3nc3]

well its official
every chipset gigabut has made in the past5 years has died in my hands

whats funny is that i havent killed any other board

just my gigabut luck
if i gotta wait a month or 2 for rma i gonna rant n buy a sata2 pci-e card

well this board is far from perfect, but you do have really bad luck with the gigabutts

just wait and rma it, and in the meantime add pci sata card to get you through the wait

[andressergio]

i was right zsamz_ GIGA on your hands is like a Karma lol

[andressergio]

DAMN zsams you have the worst luck with these boards lol . . My b2 was actually working like a champ on all my satas, and thats with getting slammed with streaming in my house to my tvs and torrent it to death lol , but guess that why intel is taking such a pricey kick in the ass with this . . hopefully soon you get another board dude

today i tested my SATA's im using 2 SSD and 3 x 1TB raid0 and still same speed than months ago

[zsamz_]

i was right zsamz_ GIGA on your hands is like a Karma lol

hope you dont get my luck you bein so far away lol

[the_real_7]

today i tested my SATA's im using 2 SSD and 3 x 1TB raid0 and still same speed than months ago

Sergio your the opposite of zsamz lol , you always just have the best luck with giga boards lol , I haven't yet seen you have problems

[zsamz_]

Sergio your the opposite of zsamz lol , you always just have the best luck with giga boards lol , I haven't yet seen you have problems

the ich is just a timebomb sooner or later
death toll on gigabut

2 865
1 965
6 p35
2 p45
1 48
1 p55
1 x58
1 p67

and i keep comin back for more
funny i only killed 1 abit a few asus boards and thats all from moding n solderin for xtra juice

[the_real_7]

the ich is just a timebomb sooner or later
death toll on gigabut

2 865
1 965
6 p35
2 p45
1 48
1 p55
1 x58
1 p67

and i keep comin back for more
funny i only killed 1 abit a few asus boards and thats all from moding n solderin for xtra juice

Yo your my freind dude but damn stop killing those poor giga boards lol
no more excuses on my dfi ut p35 still running cuase so has mine been only had it retired 1 year in box lol

[zsamz_]

Yo your my freind dude but damn stop killing those poor giga boards lol
no more excuses on my dfi ut p35 still running cuase so has mine been only had it retired 1 year in box lol

the most abused board i have is the ut p35
man that board took some abuse
and still runnin @ stock in a htpc
i was actually verry gentle with the gigabuts lol
i had 2 of em die @ stock

[andressergio]

hope you dont get my luck you bein so far away lol

well i knew since first day as all my things mate but i have good luck on hard

passed 4900 prime 1 hour on F3h loaded 1,392

passing 5000 on same bios 1,416 loaded

back to heaven...this lasts bios are super erratic

sorry for you been delayed on RMA but its better that than me that i have NO RMA

[andressergio]

Sergio your the opposite of zsamz lol , you always just have the best luck with giga boards lol , I haven't yet seen you have problems

all things i bought there never failed

[nijel]

the ich is just a timebomb sooner or later
death toll on gigabut

2 865
1 965
6 p35
2 p45
1 48
1 p55
1 x58
1 p67

and i keep comin back for more
funny i only killed 1 abit a few asus boards and thats all from moding n solderin for xtra juice

lucky you

i was told by gigabyte usa that canadians will have to wait untill they have more stock
wtf exchange only for american customers for now
and they can't even give me a freakin eta
so i gotta keep this POS board for a month or 2 untill i can get an rma

so i gotta buy another board to play
i'm 10000000% sure it wont be a gigabut

they just don't want you to kill another board.
now b/c of you all canadians has to suffer.

[zsamz_]

well i knew since first day as all my things mate but i have good luck on hard

passed 4900 prime 1 hour on F3h loaded 1,392

passing 5000 on same bios 1,416 loaded

back to heaven...this lasts bios are super erratic

sorry for you been delayed on RMA but its better that than me that i have NO RMA

if you rma just gonna cost you xtra$$$
i bought a sata2 pci card should be here tuesday

they just don't want you to kill another board.
now b/c of you all canadians has to suffer.

i dont kill boards
if they are deffective they will surely die in my hands
my ud7 not dead the ich is

[andressergio]

i went back to BIOS F3h as ma mate real 7 recommended me and passed easy prime at 4900 HT no internal PLL and cost me a bit to pass at 5000 HT but i did it

here the screens

all on BIOS F3h LLC1

4900 HT





5000 HT






cheers !
Sergio

[owikh84]

@ andressergio
I think u forgot to set dram 2133MHz hehe

[andressergio]

@ andressergio
I think u forgot to set dram 2133MHz hehe

no owi i was testing CPU but i already primed same settings on 2133 on F8f im just trying this bios comming from B3 so far F3h its best for me

i will retest on 2133 tomorrow

[Demo]

Is the UD7 worth the extra $143 over the UD4, I mean for a 2500K aircooled..

[Falkentyne]

UD5 is.
UD7, no idea...only reason to get UD7 over UD5 is the 2 extra marvell SATA3 ports, NF200 for x16/x16 SLI, POST code display, and a couple of more USB. 24 vs 20 phases won't make a difference, both boards can reach WR clocks on a good cpu.

[Demo]

We only have UD3,UD4 and UD7 here.. Dunno why they are not stocking the UD5. So i guess its UD4.

[andressergio]

here owie didnt need anything extra to 4900 HT stable prime will go for 5000 HT 2133 now



cheers
Sergio

[The|Hunter]

nice work Sergio

[owikh84]

Nice clocks and chip sergio.
Cant wait to get a better 2600K from a friend of mine.
As usual I will run Prime custom blend min FFT 128k 3200MB and latest LinX will surely narrow the distance to TJ Max.
suddenly Costa Rica batch is flooding into Malaysia I wouldn't hesitate to try my luck again.

[andressergio]

nice work Sergio

oh ! my friend nice to have you here