***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[sin0822]

Different load levels, especially light loads, create odd voltage readings, i found this to be true. but if you are complete idle, 0% on all cores in task manager, and then 100% full load, those are my results. I can't tell you what you are going to get when running superpi lol.

So my word of advise, either use the chart or get a DMM because there is no way voltage is always going to match, the idle and load trends will continue. There also is definitely no guarantee that B2 boards BIOS will work exactly the same, even though they should. Good luck, i found that Level 5-6 was pretty good for OCing, but yea voltage fluctuation max and mins are always going to be different, and they will be during different stages, usually not at 0% and 100%.

and sergio i saw that it raised to 1.5v it depends on the clock of the CPU though, i ran wprime and at 5ghz it went to 1.5v. at 100% load with IBT it dropped down, at 0% is was much lower than 1.5v. So that is just light load oddities. I doubt they will be able to do anything about it, and that is why there are 10 levels, some are really weird and some are really great.