Gskill 2133 8-9-8 testing

[chew*]

I have to buy a new copy of aida (doing as we speak) but thanks for the timings, I have another set of the same memory coming so I will see if the new set clocks any better I assume 1.68-1.7v for 2300?

more like 1.775 to 1.825 for the 2300-7-9-6 would be the range I'm guessing. Hard to tell as it appears my set isn't that great.

[l0ud_sil3nc3]

well not quite 2300 but this only took 1.77v

hopefully the new set will be better

[chew*]

Shaved 6 seconds I see

At least 4secs is due to timings. The 20 mhz cpu is worth maybe 1.8 secs at best.

[l0ud_sil3nc3]

Shaved 6 seconds I see

At least 4secs is due to timings. The 20 mhz cpu is worth maybe 1.8 secs at best.

can this cpu run over 107 blck?

[chew*]

can this cpu run over 107 blck?

Hmmm it all depends. I think it can probably do 108 with these sticks.

Here's the run msimax and I did with that chip.

http://www.hwbot.org/community/submi...in_58sec_703ms

[Elmy]

Hey guys... I just got this memory and im wondering whats the best settings for 24/7 use for gaming and occasional benchmarking ?

Thanks in advance.

[chew*]

Hey guys... I just got this memory and im wondering whats the best settings for 24/7 use for gaming and occasional benchmarking ?

Thanks in advance.

Probably somewhere in the 7-9-7 2133 range is realistic.

Currently testing 6-8-6 as well.

[l0ud_sil3nc3]

Probably somewhere in the 7-9-7 2133 range is realistic.

Currently testing 6-8-6 as well.

6-8-6

wow and I was getting happy about 6-9-6, these G Skills are turning out to be great clockers especially for the price, it doesn't make me feel bad for selling my hypers

[Johnny87au]

6-8-6 good luck, havent seen it run yet with sb..

[chew*]

6-8-6 good luck, havent seen it run yet with sb..

Well it's not gonna run at 2100 but i posted up some prime stable runs with it above 1866. Little more testing left to do.

[Leeghoofd]

you can do it B, I know you can :p

6-8-6 only got me barely over 1900ish mhz (blue 9-11-9-27 kit) Haven't tested the Flares with 8 setting...

[chew*]

you can do it B, I know you can :p

6-8-6 only got me barely over 1900ish mhz (blue 9-11-9-27 kit) Haven't tested the Flares with 8 setting...

I tried big guy even 6-9-6 is fail, my sticks are green pcb early december batch, guys doing 6-9-6 have black

It's all good though rather see people hit better speeds than a review versus getting a cherry picked sample that retail never matches.

[Elmy]

I've been running these @ 7-9-7-24 1T @ 2133 for the past 4 days now without a hickup. I think they are doing just fine

[chew*]

C6 results all updated page 1, that preety much concludes testing. Moving on to another kit and another thread but first i need to swap OS's as a 32 bit OS won't cut it for the next review.

[chew*]

looks nice, are those psc or elpeda. also any chance of seeing what they do on amd.

I lied last quick test. I tested 7-9-7 it failed, scaled voltage up a tad failed even quicker.

They pass 8-9-8 but there is not much headroom so keep that in mind.

[FlanK3r]

How much can it do for superpi 32M with Thuban?

[chew*]

How much can it do for superpi 32M with Thuban?

Usually prime at 2000 on thuban = 2100 32m on thuban.

[FlanK3r]

hope for about 1950-2000 MHz 8-8-7 for superpi 32M ...

[Leeghoofd]

8-8 don't think so :p but I hope your kit can do it...

[Hondacity]

brian

have you gotten black pcb version?

[chew*]

brian

have you gotten black pcb version?

No sir, If i want a black pcb version I have to buy it like every one else. Kinda poor right now.

[Hondacity]

drats..was hoping to see a better response against the hypers with the black kits

[hiwa]

some quick runs here +2300 7-9-7-24-1t 1.78

[l0ud_sil3nc3]

some quick runs here +2300 7-9-7-24-1t 1.78

nice to see you benching, I always look forward to seeing your memory oc

what color is your pcb?

[Johnny87au]

good to see u back hiwa been a while m8! 7/8/7 possible?