try following:
cpu pll overvoltage: disabled
llc: regular
vccsa: 0,86250
vccio: 1,1
cpu pll: 1,575
pch: 1,10
try following:
cpu pll overvoltage: disabled
llc: regular
vccsa: 0,86250
vccio: 1,1
cpu pll: 1,575
pch: 1,10
Last edited by Sauron_Vie; 03-25-2011 at 10:03 AM.
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
speaking of 1T/2T, I got my G.Skill 2133MHz stuff down to 1T and is 2 days stable now!!!
my previous gigabyte board and "A" batch SB wouldn't run 1T for more than a few days before degrading. I think I may stay at 4.6GHz/1.35v or 4.7GHz/1.376v since I'm afraid of degradation again.
CPU: Intel Core i5 2500K (L041C123) {4.9GHz/1.43v|4.8GHz/1.4v|4.7GHz/1.38v|4.6GHz/1.35v|4.5GHz/1.31v}
Cooling: Corsair H50 push/pull
Mobo: Anus P8P67 Deluxe (B3)
RAM: G.Skill Ripjaws X 2133MHz 9-11-9-28-1T 1.66v 8GB (4GB x 2)
Video: EVGA NVidia GeForce GTX 580 @ 810/1630/2100 1.05V
PSU: Corsair AX850 Gold (Seasonic X)
Case: Lian-Li Armorsuit PC-P50R + Lian-Li Windowed Side Panel W-LM2AB-1
Mouse/KB: Logitech G700 | Microsoft Sidewinder X6
Monitor: NEC Multisync EA231WMi 23" E-IPS
BSOD again, I'm trying your suggested settings. Will report asap.
EDIT : I guess CPU PLL @ 1.575 is far too low, BIOS report 1.8 @ auto. I put in your settings and got BSOD right before win7 desktop.
I'm back with auto LLC, auto VRM, vcore 1.35V, vccio 1.1 (a little higher than auto), vccsa auto, pch auto, cpu pll auto. I'll see if raised vccio keeps the BSOD away.
Last edited by Pacha; 03-26-2011 at 02:44 AM.
ASUS P8P67
i7 2600K 3.4GHz @ 4.6GHz
Twintech 8800 GT 512Mo Samsung (vgpu modded)
Crucial Ballistix DDR3 C7 2 * 2Go
2 * WD VelociRaptor 150Go RAID 0
2 * Samsung Spinpoint F3 1To RAID 0
Creative Sound Blaster Audigy 2 ZS
Seasonic S12 600HT
WC :
1A-SL2 CPU // 1A-SL2 GPU (home made fix)
Eheim 1048 + magicool 25
2 * Black Ice Pro 3 serial
Tygon 3603 + glycoshell
ok, mine is stable with these settings @4,6ghz.. only differnece i use offset mode for vcore and add vid for turbobefore win7 desktop appears turbo mode is actived.. so event u need also to add some turbo vid
Last edited by Sauron_Vie; 03-26-2011 at 07:26 AM.
1st: i7 2600K@4,6Ghz@1,28 Vcore || Asus MIVE Rev.3 || Bios 3208 || 2 x 4096 MB Corsair Vengeance || Asus GTX 580 CU II || WC with Koolance-370 || EK-VGA Supreme HF || Mora3 Pro
2nd: i7 2600K@4,6Ghz@1,32 Vcore || Asus MIVE-Gene Z68 || EVGA GTX 280 || 2 x 4096 MB ADATA XPG G Series v2.0 || WC with - EK-Supreme HF Full Nickel || VGA HK || Mora2 Pro
5,0 Ghz LinX_Stable_Club
No BSOD but total freeze a few secs before...
I put vccio back to auto, and cranked up vcore to 1.375V. If it fails I don't know where to look at... I have turbo disabled btw.
EDIT : prime stable 30 min with above settings.
Last edited by Pacha; 03-26-2011 at 04:05 AM.
ASUS P8P67
i7 2600K 3.4GHz @ 4.6GHz
Twintech 8800 GT 512Mo Samsung (vgpu modded)
Crucial Ballistix DDR3 C7 2 * 2Go
2 * WD VelociRaptor 150Go RAID 0
2 * Samsung Spinpoint F3 1To RAID 0
Creative Sound Blaster Audigy 2 ZS
Seasonic S12 600HT
WC :
1A-SL2 CPU // 1A-SL2 GPU (home made fix)
Eheim 1048 + magicool 25
2 * Black Ice Pro 3 serial
Tygon 3603 + glycoshell
Turbo is working if you let the CPU settings at stock and want it to auto oc one or more cores depending on the application and the load, or it will bump the freq from the EIST reduced stock freq. As the speed is already much higher intel specs for turbo it won't turbo anyway.
I want to run full speed all the time, old school, no laptop CPU behaviour. I don't mind about the 10 watts added to idle consumption, I'm not using a lot of electricity here for the rest and don't pollute the planet cycling so I don't care.
ASUS P8P67
i7 2600K 3.4GHz @ 4.6GHz
Twintech 8800 GT 512Mo Samsung (vgpu modded)
Crucial Ballistix DDR3 C7 2 * 2Go
2 * WD VelociRaptor 150Go RAID 0
2 * Samsung Spinpoint F3 1To RAID 0
Creative Sound Blaster Audigy 2 ZS
Seasonic S12 600HT
WC :
1A-SL2 CPU // 1A-SL2 GPU (home made fix)
Eheim 1048 + magicool 25
2 * Black Ice Pro 3 serial
Tygon 3603 + glycoshell
Sorry for the late reply my good old friend . i have tried to resurrect my board. But its dead and no way to bring it back to life. I dont know exactly what happenned , I was running LN2 on 2600k and on HD6950 Crossfire LN2 too, when suddenly the board shut off comletely, now the board wont turn on no matter what i do , as i have troubleshoot for a couple of days until not available. The cpu fan tries to spin and lights come on for a second then it shuts off completely , its dead. Im getting an UD7 next while i try to rma this one. Will keep you updated.
Mine Pro B3 is dead too...
My assumption is that VRM's are the problem, cos when i unplug the 8pin cable the PSU is starting, when it's plugged there is no go...
I'll replace it with Delux one, thinking with more VRM's it should live longer![]()
Yes, that's usually an indication of power VRM. Back in late '09 early '10, my MSI Eclipse Plus did the same thing to me after running the system OCed overnight. It had the same behavior as what you described. Though I think it may also had something to do with the kind of PSU you have or use. My PSU killed two of the same model boards, then I had to return it for fear it would do the same to the third one. Never problem since then.
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
vcore @ 1.375V seemed to do the trick. No more BSOD since then with LLC, auto VRM, vccio 1.1 , vccsa auto, pch auto, cpu pll auto.
Thank you guys for suggesting vccio 1.1, it seems it was indispensable to have light load stability.
edit : BSOD yesterday evening... I was in fact at vccio auto. I cranked up vcore to 1.38V and vccio to 1.1 this time. I'll see...
Last edited by Pacha; 03-29-2011 at 03:46 AM.
ASUS P8P67
i7 2600K 3.4GHz @ 4.6GHz
Twintech 8800 GT 512Mo Samsung (vgpu modded)
Crucial Ballistix DDR3 C7 2 * 2Go
2 * WD VelociRaptor 150Go RAID 0
2 * Samsung Spinpoint F3 1To RAID 0
Creative Sound Blaster Audigy 2 ZS
Seasonic S12 600HT
WC :
1A-SL2 CPU // 1A-SL2 GPU (home made fix)
Eheim 1048 + magicool 25
2 * Black Ice Pro 3 serial
Tygon 3603 + glycoshell
Just an FYI
This may have been mentioned before but the random BSOD's at stock idle while browsing the web were driving me nuts. Just did a test with C states enabled and auto and found that auto supplies a little more Vcore in EIST and does not BSOD. Enabled causes random BSOD's.
Left CPU Z shows voltage with C states set to Auto. Right shows voltage with C states enabled in Bios. Pretty sure I've seen voltage drop below 0.900 when set to enabled. Auto does not drop below 0.992. The last bsod frigged up a Blu-ray disc while burning, which can get expensive if it continues.![]()
Rig 1
CPU: i7-990X. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS Rampage III Formula. RAM: 12GB Mushkin DDR3 1600 CL7. GFX: EVGA GTX 580's x 2. SLI. HDD's: 1.5 TB Seagate, 1TB WD Sata III. Monitor: Samsung 25". PSU: Corsair AX 1200W. Win 7 64 Bit
Rig 2.
CPU: i7-2600K. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS P8P67 Deluxe. RAM: 4 GB GSkill Ripjaws X DDR3 1600 CL6. GFX: EVGA GTX 580. HDD: 1TB WD Sata III. Monitor: Samsung 23". PSU: Corsair AX 1200W. Win 7 64 Bit.
Short question concerning this motherboard series from Asus, is there a way of spotting an actual b3 board _without_ powering it up?
I'm about to pull the trigger on a deluxe model and will put it on water from the start, that's why I don't want to notice that I have to send the board back after installing everything...
ASUS SATA Verifier
http://event.asus.com/2011/mb/Identi...ted_SATA_port/
http://event.asus.com/2011/mb/Identify_B3_Motherboards/
Note the no2 way.
Rig 1
CPU: i7-990X. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS Rampage III Formula. RAM: 12GB Mushkin DDR3 1600 CL7. GFX: EVGA GTX 580's x 2. SLI. HDD's: 1.5 TB Seagate, 1TB WD Sata III. Monitor: Samsung 25". PSU: Corsair AX 1200W. Win 7 64 Bit
Rig 2.
CPU: i7-2600K. CASE: Antec Nine Hundred II. CPU Cooling: TR Venomous X RT. MOBO: ASUS P8P67 Deluxe. RAM: 4 GB GSkill Ripjaws X DDR3 1600 CL6. GFX: EVGA GTX 580. HDD: 1TB WD Sata III. Monitor: Samsung 23". PSU: Corsair AX 1200W. Win 7 64 Bit.
I've had 2 cds to the bin due to these BSOD...
I don't use EIST and as the CPU is stable when full loading it, I think that sometimes vcore dips too low at idle as it's not fully stable and moving around ±0.025V which is quite high, and when it hits the too low value for full speed with a light load I get BSOD.
I guess this board needs vdroop mod as I my Commando did, which helped in this regard.
Those who have stability at idle is because they use EIST with offset mode to crank up the idle voltage, but without EIST you just can't prevent the board to vdroop at idle full speed at have enough vcore for light load stability.
Last edited by Pacha; 03-30-2011 at 09:43 AM.
ASUS P8P67
i7 2600K 3.4GHz @ 4.6GHz
Twintech 8800 GT 512Mo Samsung (vgpu modded)
Crucial Ballistix DDR3 C7 2 * 2Go
2 * WD VelociRaptor 150Go RAID 0
2 * Samsung Spinpoint F3 1To RAID 0
Creative Sound Blaster Audigy 2 ZS
Seasonic S12 600HT
WC :
1A-SL2 CPU // 1A-SL2 GPU (home made fix)
Eheim 1048 + magicool 25
2 * Black Ice Pro 3 serial
Tygon 3603 + glycoshell
you using offset or manual voltages ? upping the vcore a tiny bit more ?
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
How does the PLL overvoltage work? Is the voltage applied under load or idle?
I am stable at 45x, offset 0.080, LCC disabled and PLL is also disabled. I need a boat load of vcore above 46x, and was thinking if better to enable the PLL overvoltage instead of rising the offset?
Does anyone help me? please...
I just finished my new p8p67 Pro B2 with 2600k cpu system and the pc wont boot... the cpu led is red. No any beep code from bios? what's happened?
(it's off 1 time and restart again...)
I have G-skill RJ-X 1600 4*2 memory SATA3 640*2 ANTECH TPQ1000 and GTX 580.
Thanks
Bookmarks