Started out With a Single Stage.......

[hallowen]

Cool!(No Pun Intended!)

I Have Begun Plans for the Layout of the Third, and POSSIBLY Fourth Stage, of This Cascade.

I Know It will Involve Much More Higher Pressure Gases, Hopefully some of which are Non-Flammable, But after Using R1150, I Think I Can Handle It!

[chilly1]

R740 and R50 will be nessassary and a larger first and second. The third needs to be an autocascade.

[hallowen]

Chilly1

How much Larger are the Stages you are Talking About?

Do You Mean HP of the Comps, or Overall Size?

I KNOW It will be difficult(For Me!) to Construct an AutoCascade,
But I'm Game!

So, We'll be using a Blend of R740(Argon) and R50(Methane) in the AutoCascade?

[OPPAINTER]

Nice, I'm heading to Wallmart and getting one of those stands

OPP

[hallowen]

OPP

I had to Order The Shelving Online 'cause it wasn't available at the WalMart Store

[OPPAINTER]

Originally posted by hallowen
OPP

I had to Order The Shelving Online 'cause it wasn't available at the WalMart Store

Your right

I was just there and they didn't have them

OPP

[hallowen]

Guys,

If Ya'll want to see from "Day One" the Construction of My Cascade, Please Feel Free To Visit TeamPuss and Check it Out,'cause There's Too Much Info to Go over and Show You Here Again!

http://www.teampuss.com/forums/viewtopic.php?t=71

[hatemi]

I still cant get to the TeamPuss forums even tough I have registered and can singn up in the main page but the forums are still a no go

[hallowen]

Almost Ready To Test Under Load..............

[hallowen]

2

[hallowen]

3

[Marvin]

Man, it is awesome.

[kayl]

nows thats what you call a computer desk
congradulations for the big 3 digit coolness

once i joined your link worked fine
http://www.teampuss.com/forums/viewtopic.php?t=71

[hatemi]

yes the link worked fine all along. It was actually my bad that I couldn't get in to the forums...Thanks Runmc for your help

[Iridium192_217]

thats real nice

how long did it take you to assemble that?

[hallowen]

Iridium192_217

It Took Me About 2 Months Reading/Forum Inquires/Building to Get To Where the Cascade Is ATM!

[hallowen]

First Time Under Load!!

[hallowen]

Temp At:

[EmineM]

Now super pi please

[kayl]

nice oc, now just need to fine tune to hold a better temp under load

[hallowen]

[chilly1]

Looks like you need to run the pressure a little higher on the pev, what setting did you use?

[hallowen]

Chilly1

Low Side at 16psi / High Side at 235psi

Still adjusting, but seems to hold around -84/-85C

[cold_ice]

Awesome overclock and cascade
Look at the voltage, maybe you could get more out of it

[hallowen]

Lowest Temps ATM Under Load.