The best we could squeeze out from our kit of bad kingstons was 2300mhz with ugly latencies and by putting ram kit@ln2... we tried also to use a lower bclk and the 2400mhz divider to have a resulting frequency of around 2300mhz, no post at all.
Massman just told me on hwbot forums that the 2400mhz divider was available only on es cpus, so that is why there's no luck in trying to use it
Hope the hypers work on it for you.Originally Posted by Splave
w00t finally found an MIVE in stockgood by deluxe, hello cas 7
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
No way to squeeze out more than this:
Too bad we didn't break the 6mins barrier... we need some more mhz here and there
Just broke into 5m for 32M today... Have a nice chip though.
Ram is maxed unfortunately. No waza, need to have another go again with a different OS.
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
very nice linuxfan, that is flyingJust broke into 5m for 32M today... Have a nice chip though.
Ram is maxed unfortunately. No waza, need to have another go again with a different OS.
I just got the board and starting to get used to it
Last edited by quake6; 03-16-2011 at 12:42 AM.
Not badI just got the board and starting to get used to it
I need better ram
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
I have GTX2 here, but no go with MIVE :/
I just realized that if I put all subtimings on Auto, the MIVE B3 would get stuck at postcode 45 for 2133 7-7-6. But if I use the tweaked subtimings from my UD7 runs, it was fine. First time I tried 2133-7-7-6 I used the tweaked subtimings. Only now when I was too lazy to enter the subtimings after changing things did I find out the MiVE auto subs don't work on my hypers.
I think some auto sub settings are too tight (or too loose?) for the hypers @2133 7-7-x but haven't figured out which ones. Maybe chew* has.
Try these subs, adjusting bit by bit to see if it works for you:
ASUS subs greater than GIGA subs, need lower sub timings on giga than asus for same effec, haven't had a chance to test ASUS tighter.
1298 bios has the subtiming changes + additions I asked for or it should, you can get it at hwbot.
Other fixes implemented also apparently but not at my request ( likely 24/7 user stuff ), once I test 1298 with the timing options I requested I will see if I can get ease of use aka easier to run 32m ironed out.
1298 should have same or better effec than the bios I tested.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
what voltages are you at for that duderI just realized that if I put all subtimings on Auto, the MIVE B3 would get stuck at postcode 45 for 2133 7-7-6. But if I use the tweaked subtimings from my UD7 runs, it was fine. First time I tried 2133-7-7-6 I used the tweaked subtimings. Only now when I was too lazy to enter the subtimings after changing things did I find out the MiVE auto subs don't work on my hypers.
I think some auto sub settings are too tight (or too loose?) for the hypers @2133 7-7-x but haven't figured out which ones. Maybe chew* has.
Try these subs, adjusting bit by bit to see if it works for you:
I cant even post those subtimings with less then 1.85vdimm 1.15vCCIO
runs 1m and pf and insta fails 32m for me.
Funny thing is though even at 8 8 8 24 2133 and your secondary timings I fail right away so that leads me to believe it is sub timings or something else Im missing.
Same thing for me :/ Didn't work
I'll be working on it this week, I'm well aware that it's certainly a "strain" to run 32m tuned to the hilt on m4e, possible but still a pita.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
not bad for bbse
I like that MIVE llc actually works instead of just overvolting under load. Going to drop multi again and see if it will pass
(LOL @ Keygen)
@Splave
Sorry If I've missed it but what RAM are you using?... its flying
Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.
Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.
Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.
8-9-8 2133 ripjaws-X 1.725v 1.1vCCIO and healthy dose of vCore
http://www.newegg.com/Product/Produc...-450-_-Product
Its gone up in price a little now
Congratz Splave, good efficiency!
Thanks Splave, as ron says your efficiency is great. I have some of those & will have to give 6.9.6 another go last time I tested 6.9.6 I needed 1.78 just to post/boot so didn't give them a proper go.... maybe a handful of vcore will help.Congratz Splave, good efficiency!
Home / Play Rig Asrock Z87 OC Formula/AC, i7 4770K L310B487, 8GB Corsair Dominator Platinum 2666 CL10, BeQuiet Dark Power Pro P8 1200W PSU, 120GB Corsair Force GT SSD, 2 x 1TB WD Sata Drives Mirrored, Palit 680GTX JetStream, Antec Kuhler 920, Windows 10 Pro, Logitech LX700 Deskset, AOC 27" Monitor.
Work 24/7 Rig Gigabyte GA-Z97X-SOC Force, i7 4790K L418C133 ,8GB Team Xtreem LV 2600, PC Power & Cooling 850WPSU, 120GB OCZ Vertex 3 SSD, 2 x 500GB Hitachi Sata Drives Mirrored, Antec Kuhler 620, Windows 10 Pro 64 Bit, Logitech LX700 Deskset, Benq 27" Monitor.
Home NAS DFI P35 T2RL Motherboard, Intel E6850 CPU, 8GB Nanya DDR2 6400, 2X 2TB Toshiba DT01ACA200 SATA Drives, ZFS RAID Mirror On Intel ICH9 AHCI, Artic Blue 850W PSU, Marvell Yukon 88E8053 Gigabit Ethernet, FreeNAS 9.2.1.5 RC, 64-Bit On 4GB USB2 SanDisk Cruizer Blade Thumb Drive.
FWIW, spi1m@1.65vdimm/1.135vccio and spi32m @ 1.75vdimm with those subs. But then again, that's 4GB with 1pc GTX2 and 1pc binned GT (CMG6GX3 2000C7). 8GB needs a bit more as the rest of my GT kits can't keep up with these two.what voltages are you at for that duder
I cant even post those subtimings with less then 1.85vdimm 1.15vCCIO
runs 1m and pf and insta fails 32m for me.
Funny thing is though even at 8 8 8 24 2133 and your secondary timings I fail right away so that leads me to believe it is sub timings or something else Im missing.
Speaking of 8GB, that problem with 45 post code on 2133-7-7-6 auto subs was only happening for 8GB. 4GB's fine with all autos so subtimings may or may not be the culprit after all given that tweaking subs still don't work for you and quake.
Anyways, i tried pushing the 8GB set some more and got it running spi 32m@2179-7-7-7 and 1m@2271-7-8-7 :
Im in awe right now! thats like amazing to me. Do you raise system agent at all? Anything funny in the digi tab?
This is pure awesomeness,having 8 GB of Hyper that run properly on maximus....
The problem with above is what happens when you start running at max speeds of cpu.
5 gig was preety easy with hyper, max speed of cpu got alot harder, especially when tossing waza in.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
I can run hypers with 4.5GHz on cpu, but with 5GHz and above no way... I spend at least 10hours with subtimings, but no luck. Also running on B2 revision, but I doubt that has something to do with it
New chips looks like its a monster! 1.475vCore in bios...on Venomous-X push pull.
Finally Splave
Frezz it
Reply With Quote
Bookmarks