***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[Eldonko]

Yah like Lsdmeasap said, UD7 runs 16x/16x fine. The NF200 doubles the bw of the native 8 lane 5GT/s bus. Also the UD7 is one of a very few boards that has it’s own PCI-E bus for USB3 and SATA6G so these devices do not pull any bw from your PCI-E slots. However, if you dont care about NF200 then you def dont need to spend the extra $ on a UD7

Nice review Lsdmeasap, I like the HD benching bit. cheers

[the_real_7]

Yah like Lsdmeasap said, UD7 runs 16x/16x fine. The NF200 doubles the bw of the native 8 lane 5GT/s bus. Also the UD7 is one of a very few boards that has it’s own PCI-E bus for USB3 and SATA6G so these devices do not pull any bw from your PCI-E slots. However, if you dont care about NF200 then you def dont need to spend the extra $ on a UD7

Nice review Lsdmeasap, I like the HD benching bit. cheers

Awesome to hear your feedback on the review, thanks much!!

UD7 has NF200, so you can run x16/x16 Xfire on it, unlike the lesser model boards that can only do x16/x8.

So it's up to you what will fit your needs really

Lsdmeasap IS RIGHT ! ! ! This board blazes with crossfire , my fastest setup yet and im running 16x 8x here some proof

[sin0822]

nice eldonko.

[the_real_7]

Does anyone have the bios template . . .

[sin0822]

Cpu multi:
Vcore:
Qpi/vtt:
Memory multi:
Done hahahaha i can try and make one.

[andressergio]

Are your SuperPi/Wprime scores the same? Or did they also increase?

i tested all bios and F8x does not improve 3Dscores at all at least on nvidia

would be nice for someone to post a comparison

[andressergio]

Cpu multi:
Vcore:
Qpi/vtt:
Memory multi:
Done hahahaha i can try and make one.

nice template sin

[the_real_7]

Cpu multi:
Vcore:
Qpi/vtt:
Memory multi:
Done hahahaha i can try and make one.

lol he he , i thought there was one , maybe i was using my imagination again

[stasio]

Use from UD5 here:
http://www.xtremesystems.org/forums/...d.php?t=264003

[Dumo]

Yah like Lsdmeasap said, UD7 runs 16x/16x fine.

Fully dress stock CUII SLI have to run 16X and 8X on UD7...

[MacClipper]

For those who already swapped the motherboard for the new B3 version: did you have to give back ALL the items that were in the box, or just the motherboard without cables etc?

Over here in SG, seems they do a full box swap in exchange for a new full retail box.

HTH.

[Lsdmeasap]

Yah like Lsdmeasap said, UD7 runs 16x/16x fine. The NF200 doubles the bw of the native 8 lane 5GT/s bus. Also the UD7 is one of a very few boards that has it’s own PCI-E bus for USB3 and SATA6G so these devices do not pull any bw from your PCI-E slots. However, if you dont care about NF200 then you def dont need to spend the extra $ on a UD7

Nice review Lsdmeasap, I like the HD benching bit. cheers

Glad to hear you liked the review, thanks for the feedback man!

SSD testing was what I was most interested in P67 about, so I had to have that in before anything else was even considered!

[nijel]

Got my B3. No visible difference from B2. Came with bios F1. CPU PLL Overvoltage is there so I guess it wont be beta bios option only. Vddr is tweaked 1.48V in bios reads B2-1.476V/B3-1.488V in Windows. Memory is now stable with 1.46V bios/1.464 windows. Also seems like CPU needs 0.005 less voltage for same clock stable, need more testing. CPU-Z can't read Vcore. AIDA64 reads 2.988-3.000V constantly. HWiNFO32 reads everything correctly. ET6 works.

[Falkentyne]

Pretty sure (but too sleepy to verify) all the initial release bioses had PLL overvoltage even for B2.

UD7 was working ok BIOS wise before B3. UD5 got UD7's LLC settings in our B3 F1.

Can you check and see if your board retains the overclock settings after unplugging the PSU (if PLL is off, of course)? That was a new change for F1 on the B3 UD5; it used to lose it...

[nijel]

Can't recall CPU PLL Overvoltage in official non-beta bios.
It retains settings. Changed the CPU couple of times with PSU unplugged. Actually don't remember having this problem with B2 board and latest bioses.

[the_real_7]

Use from UD5 here:
http://www.xtremesystems.org/forums/...d.php?t=264003

Thanks Stasio

[cowie]

Fully dress stock CUII SLI have to run 16X and 8X on UD7...

can you use a slot extender or is there no room with the cuII card?
I know the pros say it does not matter anyway but for $5 usd its worth a try no?
I had the board about a week at launch before i killed it,was worth a few points in 3d benches from my quick testing with 580 sli.

[andressergio]

Lsdmeasap IS RIGHT ! ! ! This board blazes with crossfire , my fastest setup yet and im running 16x 8x here some proof

tested each vanila 570 individualy and they have just a 10mhz dif on core at same volts for 24/7 amazing cards

runing SLI 16/8



Uploaded with ImageShack.us

cheers !
Sergio

[vern]

tested each vanila 570 individualy and they have just a 10mhz dif on core at same volts for 24/7 amazing cards

runing SLI 16/8



Uploaded with ImageShack.us

cheers !
Sergio

Nice , 24/7

[andressergio]

Nice , 24/7

thanks vern

[l0ud_sil3nc3]

very nice andressergio

I really wanted a UD7 but I missed the preorder for it on Directron, so I ended up going with the Asus P8P67 Deluxe

So I see you got rid of your hypers

that GSkill kit looks very nice, can it run 6-9-6 at 2133?

[andressergio]

very nice andressergio

I really wanted a UD7 but I missed the preorder for it on Directron, so I ended up going with the Asus P8P67 Deluxe

So I see you got rid of your hypers

that GSkill kit looks very nice, can it run 6-9-6 at 2133?

thanks mate nope my hypers are here love them can do 1869 C8 or less but this are MUSHKIN 1600 6-9-6...amazing RAM

cheers
Sergio

[the_real_7]

tested each vanila 570 individualy and they have just a 10mhz dif on core at same volts for 24/7 amazing cards

runing SLI 16/8



Uploaded with ImageShack.us

cheers !
Sergio

nice score there sir lol

[andressergio]

nice score there sir lol

thanks mate

[thebanik]

Nice platform, didnt expect it can compete with LGA775 in 3D01, but it does, and does nicely. Need some cold on the card though....