Quote Originally Posted by andressergio View Post
i was testing 1,47bios set on LLC1 as my max vcore, so i decided this time to make it pass 3 hours + on 1600C7 to see if CPU was stable and it was i used 1,05vtt, so i cranked up ram and failed in 20mins so i went till 1,12vtt + that vcore and all went good

i also set trfc 88 and IO latency = 2 this last one makes me start and restart with no boot loops unless i make anything wrong

other tip i got is to use system agent on 0,975 that helps ram stable but i just used it on auto

the vcore combo + vtt was the key

thanks for asking
cheers !
Sergio

Thats one of the worst chips ive seen on those forums... I thought i had a poor chip since i need 1.39v to run the chip @ 4.8 w/HTon but you need over 1.4 volt,

Most ppl can acheive 4.8 with like 1.37 vcore. Damn shame if you ask me .