idk how you guys can run 1.6v+ on air.....my cpu shutdown because of temps @ 1.5/1.55v under water. I've checked contact and it's fine
also it looks like it tops at 54x
idk how you guys can run 1.6v+ on air.....my cpu shutdown because of temps @ 1.5/1.55v under water. I've checked contact and it's fine
also it looks like it tops at 54x
Intel i7 980x / 3001B331
HK3.0+LaingDDCPRO+XSPCRX360+1xMCR220
EVGA Classified X58+EK FB
6GB Corsair Dominator GT 1866 7-8-7-20(TR3X6G1866C7GT)
ASUS GTX580
Enermax Revolution+85 950w
Corsair Obsidian
could be worse i guess, I tested many sub 52X.Originally Posted by mk-ultra
idk how you guys can run 1.6v+ on air.....my cpu shutdown because of temps @ 1.5/1.55v under water. I've checked contact and it's fine
also it looks like it tops at 54x
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
yeah i know there's worst chip out there
ok now bad news/good news
good news:
temps are sorted i guess <75oC @ 1.54/1.55 for 5.4ghz
bad news:
cannot touch bclck, 100.3=blinking cursor
Intel i7 980x / 3001B331
HK3.0+LaingDDCPRO+XSPCRX360+1xMCR220
EVGA Classified X58+EK FB
6GB Corsair Dominator GT 1866 7-8-7-20(TR3X6G1866C7GT)
ASUS GTX580
Enermax Revolution+85 950w
Corsair Obsidian
Can you go higher with 53X?.........
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
yes a bit more, but i still run into the 5400mhz barrier, so i haven't mess much with it
i'll try it under SS tomorrow or later this week to see if i can improve, then i'll start benching it 2d/3d
Intel i7 980x / 3001B331
HK3.0+LaingDDCPRO+XSPCRX360+1xMCR220
EVGA Classified X58+EK FB
6GB Corsair Dominator GT 1866 7-8-7-20(TR3X6G1866C7GT)
ASUS GTX580
Enermax Revolution+85 950w
Corsair Obsidian
Thats what I hear.
Can't wait to grab a UD4 or something like that when they come out again.
Hey man it isn't that bad. These things are still fast at 5.4. The best one out of 7 2600Ks for me was 5.3g.
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Got a beautiful P55 setup from Elano today....
Can't wait to bench.
Thanks man!
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Ready to rock? All u need is cold, that's were I failed with the pos Venom...Got a beautiful P55 setup from Elano today....
Can't wait to bench.
Thanks man!
//RETIRED-o00o--°(_)°--o00o-OVERCLOCKER//
Yeah pretty much.... Week is packed but maybe by the weekend or next week at latest... putting pot on anyway for fun
Sounds like this ram is the old version which dies easily... hope it doesn't fail and I need to figure out how to RMA if possible...
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
54 is definately a good chip - there are a lot of 52 and below.
I would say 52, maybe 52-53 is average.
Your chip is for sure well above average,
Congrats on your acquisition!Yeah pretty much.... Week is packed but maybe by the weekend or next week at latest... putting pot on anyway for fun
Sounds like this ram is the old version which dies easily... hope it doesn't fail and I need to figure out how to RMA if possible...
I think I have the same memory and I've been very happy with it.
It's the same set that I've been running at 1.88v so much.
Since I'm dead in the water on SB for the moment maybe I'll fire up the x58 UD7/W3520 and test this memory a little better.
As you suggested before, one stick at a time and what app's?
I wonder if the memory controller will limit me?
Nice Dragon skinned mobo job Elano
You might be able to run 1100mhz or more memory depends on the CPU I think.Congrats on your acquisition!
I think I have the same memory and I've been very happy with it.
It's the same set that I've been running at 1.88v so much.
Since I'm dead in the water on SB for the moment maybe I'll fire up the x58 UD7/W3520 and test this memory a little better.
As you suggested before, one stick at a time and what app's?
I wonder if the memory controller will limit me?
Have fun!
Heh, hope it works as good as it looks.Nice Dragon skinned mobo job Elano
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
I still had 'my touch' back then!Nice Dragon skinned mobo job Elano
Don't worry about memory on this setup Linux, you wont be pushing it at all because the only ratio that works well on this platform is 2:6 (4:12) so they will be way below thresholdYou might be able to run 1100mhz or more memory depends on the CPU I think.
Have fun!
//RETIRED-o00o--°(_)°--o00o-OVERCLOCKER//
Yeah I'm not too worried about it with this setup.I still had 'my touch' back then!
Don't worry about memory on this setup Linux, you wont be pushing it at all because the only ratio that works well on this platform is 2:6 (4:12) so they will be way below threshold
Just not sure if it'd last if I push it in a different setup...
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Awesome scores MTP04!
Nice score Yotomeczek, I'm sure you can get some more out of the card!
![](http://www.hwbot.org/signature/u15466.png height="110" )
Good work Messrs MTP04 and Yotomeczek! Nice scores guys!
Thanks Mr Steve and Dan. I hope to get some ln2 in the coming weeks.
Hope that works out well man!Thanks Mr Steve and Dan. I hope to get some ln2 in the coming weeks.
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
N00bie question here: What is that you are using to insulate the board with? Looks like a really easy solution...Got a beautiful P55 setup from Elano today....
Can't wait to bench.
Thanks man!
^ there is probably other places but here is one, I haven't tried it yet myself, still using eraser - http://www.smooth-on.com/Dragon-Skin...tml?catdepth=1
Eraser works ok... but conformal rocks.
This dragon skin stuff seems to be somewhere in the middle.
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Ok, thanks for the info. I used both conformal and eraser on my REX, witch was my first board prep. Went ok, the board didn't dieThe Dragon stuff just looks like its really easy and fast to apply, the eraser takes some time for me to do.
I usually do both conformal (brush on, let it dry, preferrably overnight) and then eraser over that with shop towel overall - is this overkill?Eraser works ok... but conformal rocks.
This dragon skin stuff seems to be somewhere in the middle.
Would I be ok with just conformal (maybe multiple conformal coats) and shop towel?
I think if you did the conformal right and covered everything, you really don't need eraser except a tiny bit around the socket.
Heatware
Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
Stuff I used to have:
Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600
"In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart
Posting Permissions
Reply With Quote
Bookmarks