Quote Originally Posted by dejanh View Post
Hey folks! I figured I'd give this a shot here as well being the Classified thread and all...

Normally I would not ask many questions when it comes to hardware but this one has got me completely stumped. Basically, I got a new i7 970 a couple days ago and installed it on my EVGA E759 Classified (this is the limited edition board with NF200 chip) running the latest BIOS 77. Before installing the chip I did a full CMOS reset and loaded defaults, powered down the system, and proceeded to install the chip.

Now, I've got everything up and running and the chip is working fine except that no matter what combination I try the turbo multiplier on the chip is not working. I have already verified that it is not working using i7TurboGT, RealTemp, E-LEET, CPU-Z, and CPU Tweaker. I have tried every possible combination of EIST, C-states, and Turbo possible so far with no success. I simply cannot get the 25x multiplier to show up. I've even done multiple CMOS resets followed by setting the appropriate settings, ensuring that I am using the stock multiplier of 24x, etc., with no success.

I'm completely at odds what to do at this point

Any help you can provide I would appreciate! This is stopping me from using the chip to the full potential and I do not know what to do
have you figured this out?i just got a 970 and my E760 does the same,no x25 yet?