Quote Originally Posted by the_real_7 View Post
so C - N or you saying you don't use ll1 ? cause it spikes to high after bouncing back up from droop on the load
Yes I do use level 1 as std drop/droops 0.1v too much imo.

No not the increase/spike from unload to load.

Level 1 overvolts a bit & compounded by the overvolt from the bios setting looks bad i.e set 1.335 get 1.356 in windows 1.38 under load .045 increase this should be better/less & simply put GB should at least re hash the numbers in bios to match windows. Not easy maybe but other boards I have used can get it right.... sometimes with several goes & on one a DFI, they even put a user adjustable value in bios to correct it.

Level 1 vcore set normal with or without dvid you get even more overvolt under load compounded even more the more vcore you add as some chips need 1.35 / 1.45 even 1.55 to do 5G.

Level 2..... forget it it spikes so much the rig reboots under load!!