SandyBridge 2D madness - let's tweak for the best 1m, 32m, pifast and wprime!

chew* · 02-10-2011, 04:51 PM

Originally Posted by dinos22

hahah that is SICK dude. If you had a 5.6 chip that would be 5K LOL j/k

i pwms you noob with my beer tweak lol

its a nice quick bench but its gay.

**Splave** · 02-10-2011, 10:47 PM

Originally Posted by SoF

didn't heard of that but just a stupid thought: are you running high bclk? isn't bclk overclocking the entire system-components including sata ports? maybe they don't like it beeing pushed hard? tried using different sata ports (as this is what waaza stresses) or another theory: you are having the cougar point sata issues - tried the 6G ports?

Yes tried both but no luck thanks for the ideas

Are you guys installing chipset drivers and intel management engine drivers? Derp Derp that could be my issue huh?

chew* · 02-10-2011, 10:53 PM

Originally Posted by Splave

Yes tried both but no luck thanks for the ideas

Are you guys installing chipset drivers and intel management engine drivers? Derp Derp that could be my issue huh?

No, however i tried OCX tweaker, little less stable with it but no crashes.

I'll stick to the old lame way of cut and pasting, i'm stubborn like that.

**steponz** · 02-10-2011, 11:54 PM

I installed both....

**SoF** · 02-11-2011, 05:19 AM

Originally Posted by Splave

Yes tried both but no luck thanks for the ideas

Are you guys installing chipset drivers and intel management engine drivers? Derp Derp that could be my issue huh?

hmmmm then I am running out of ideas. I am not installing any drivers just plain "light" win xp sp3.
I never had any issues with cw also when I was at my max cpu speed. using pi-tweaker here also (so comfortable, why using the stairs when there is an elevator

)

**Splave** · 02-11-2011, 11:02 AM

what a strange platform. I think eva is on to something with the "Bclk holes"
my chip wont boot 56x100 at any voltage but it boots and benches at 56x100.1

chew* · 02-11-2011, 11:04 AM

Originally Posted by Splave

what a strange platform. I think eva is on to something with the "Bclk holes"
my chip wont boot 56x100 at any voltage but it boots and benches at 56x100.1

with giga it likes .5 bclk max boot increments, workaround = use eztune 6 for bclk, board will restart fine till you crash a bench at least

Mine boots fine at 100.00, then again i'm stuck at 50X multi.....

**eva2000** · 02-11-2011, 11:11 AM

Going form bios MIT 100.2 is like 100.05, 100.5 = 100.34, 100.6 = 100.43,

100.2

**Bullu$** · 02-11-2011, 02:27 PM

Originally Posted by dinos22

hahah that is SICK dude. If you had a 5.6 chip that would be 5K LOL j/k

i pwms you noob with my beer tweak lol

My Johnny Walker tweak

**Splave** · 02-11-2011, 05:02 PM

my chip hates cold, -38c wont boot windows. waste of single stage powah

**Linuxfan** · 02-11-2011, 10:13 PM

Originally Posted by Splave

my chip hates cold, -38c wont boot windows. waste of single stage powah

Too bad.. My last two 2600Ks did fine on my SS which supposedly runs down to -44oC max... maybe even with the OCZ freeze there was a bit of difference between CPU die and SS...

**Splave** · 02-13-2011, 12:44 PM

Best I could do without hyper, not too bad I think

took alot of work. Any tigher on ram wont boot

**SoF** · 02-13-2011, 01:39 PM

wow very nice eff

just had a guess here: the mem remapping feature ppl talk about - might that be also the key to the problem some boards loose in 01 against jeeehhgaballs?

chew* · 02-13-2011, 02:01 PM

sub 6 bar is about to get raised

Looks like my calculations were off, must be that my 2500K is really less effec.

Msimax just has one thing to say.

**Don_Dan** · 02-13-2011, 02:25 PM

Nice work guys!

**Linuxfan** · 02-13-2011, 03:44 PM

Originally Posted by chew*

sub 6 bar is about to get raised

Looks like my calculations were off, must be that my 2500K is really less effec.

Really nice.
Does it do 5.6 32M and are you just teasing us?

chew* · 02-13-2011, 04:20 PM

overall max with chip is less with hypers installed

**C-N** · 02-13-2011, 04:26 PM

Sorry for going ot but I Just finished reading this thread front to back as I wasn't paying proper attention & chuckled at this "K8NXP-SLI back in the days" I still have one been running proper 24/7 at work @ 2.8GHz for 6 years!!! ffffin good board.

**dinos22** · 02-13-2011, 04:27 PM

nice chew but do some 5Ghz too biatch

hey MSImax forgot his Tide beerkeg

.

and who's the lucky lady LMAO

**Linuxfan** · 02-13-2011, 04:30 PM

Originally Posted by dinos22

nice chew but do some 5Ghz too biatch

hey MSImax forgot his Tide beerkeg

.

Clean your mouth with TIDE while drinking beer! I'm sure thats healthy.

chew* · 02-13-2011, 05:27 PM

Originally Posted by dinos22

nice chew but do some 5Ghz too biatch

I don't think he will let me 32m his chip anymore after the second core went kinda kaput after a couple runs........thus why we used 3 which was slower

sub 6 was doable at sub 5500 on 2nd core if i had got the system dialed in before i flaked out that cores imc.

**Linuxfan** · 02-13-2011, 09:48 PM

Originally Posted by chew*

I don't think he will let me 32m his chip anymore after the second core went kinda kaput after a couple runs........thus why we used 3 which was slower

sub 6 was doable at sub 5500 on 2nd core if i had got the system dialed in before i flaked out that cores imc.

Thats a bummer man...
Find a 5.7+ chip now MSIMax.

Pretty sweet runs this weekend!
Lets see some real benching and get that 480 on LN2. Don't forget Vantage either.

**namegt** · 02-13-2011, 09:58 PM

hahaha nice guys

**dinos22** · 02-13-2011, 10:11 PM

wow imageshack police banned my Msimax image

**aristidis** · 02-14-2011, 07:24 AM

And a 5G run.. with wrong CPUZ screenshot

. Any way mem timmings 7-7-6-20

Thread: SandyBridge 2D madness - let's tweak for the best 1m, 32m, pifast and wprime!

Thread Tools

Search Thread

Rate This Thread

Display

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions