do you find that your slot 1 and 3 clock better than slots 2 and 4??
do you find that your slot 1 and 3 clock better than slots 2 and 4??
As much as we all like to see brilliant chips this thread isn't about having some fast chip but actually being fastOriginally Posted by trans am
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Thanks, kept scratching my head for 2 days, was getting stuck on 34 minutes. But I do not have any USB devices connected, lol, hence didnt change that setting. Will join this thread soon....shouldnt make much difference Turbo to extreme but if it is slower you are running unstable due to some timings set too tight with extreme preset
Hey Jody i agree man, i hate scrolling sideways, thats stupid. Eva2000 would fix this and many other issues charles has in a millisecond, not sure why this hasnt been sorted out, it's annoying.
Scary efficiency and you are only warming up lol, cant wait for CAS6
i just spent two days and nights (was chatting to brian all day yesterday) to figure out why thei cant install Win2K3 server on the giga and can on Asus board i have. Brian disabled and turned off everything in bios and it worked for him lol and it did for me. It turns out it was USB Legacy and USB Storage settings in bios which are automatically enabled so once that was disabled it worked like a charm. It makes sense in hindsight, slaps myself.
i just installed 3 fresh OSes on a drive and made a backup. Now i need a proper CPUWill have a play end of this week
EVGA Classified (MSI XPower), 980X (i5 661, i5 680, i7 950, E8600, QX9650, E8400), Thermalright Venomous X , Kingston Hyper X 2000Mhz, MSI 480GTX (5870, 4870x2, Visiontek 3870 x2, XFX 8800GT w/HR03GT), DELL E248WFP, CM Silent Power Pro 1000W, Seagate 1TB + 1TB + 500GB+500GB, Auzentech X-Plosion, CM Bench Station, AL 641, MX 518, New G15 Keyboard
did a run with a better OS, it seems wazza will play less and less importance with 32M, it will be more about memory/cpu clocks etc now
Great run....
Did some experimenting on the board and the ram....
Subs considerably loose for now (exactly what you see in aida64 is whats set ). Yes on air, cool air but air as in no i'm not outside in winter or have a window open.........
Very weak waza
I have a migraine, try to tune them out later after a nap and some advil.
Last edited by chew*; 02-08-2011 at 10:00 AM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
looks like everybody is getting 6min 32s easy now - don't have time for benching due to business trips next 2 weeks but this makes me wanting to re-test
Loosing 2 or 3s against the best guys I am fine with that but beeing beaten by 5s+ from everybody is a shame
| '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
| '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
| '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67
| '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
| '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
| '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
| '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled
| '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW
sof pulled a fermi on all of us !!!
all the 32s times are with a jeeeegabyteand 1067 7-7-7-x
Last edited by dinos22; 02-08-2011 at 03:00 PM.
No luck really with subs at 2200+.
I can pull Twcl into 6 but it's a 50/50 it will pass 32m once you throw a waza in.
Trrd did not like to be touched at all.
Twr could only be pulled into 10.
TRFC was ok for 56.
All in all it really wasn't worth it however, maybe at 2200 flat you can pull it in more but that wasn't putting me anywere near 5 gig so didn't bother for now.
Last edited by chew*; 02-08-2011 at 03:18 PM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Really wish I knew about the "no memory protect" bs...
Here's my under 6min with new chip.
Just a quick run.. Im doing 3d LN2 tonight..
Last edited by steponz; 02-09-2011 at 10:22 AM.
jody is kicking your ass hard dude, 50MHz lower
Like I said a quick run... punk arse..... you blind....
i bet charles will chime in now and kick your ass the same with a quick run and call you a noob
oh and he will use tight B2B settings of course LMAO
Last edited by dinos22; 02-08-2011 at 04:02 PM.
you noticed that too?:pall the 32s times are with a jeeeegabyte
testing the mive vs the jigga boards is showing to be slower clock per clock in 32m. hopefully a new BIOS will help it catch up.
On another note, what did Intel do with these chips...everyone maxing out around the same frequency regardless of cooling. And they don't really respond to cold at all, what's up with that?
There is a conspiracy, Intel is out to piss off all the ln2 guys with sandy biatch..... lol.....
Yea but they will have a surprise about the huge RMA numbers. Everybody will fry their 5.2-5.3GHz Sandy Ballz to get a better one
Born to lose, live to win!
shhhh.... don't tell anybody.... lol
you got a jeega rip it up boy
nah, had a buddy of mine who has both boards do some testing which confirmed....that I'm not going nutsyou got a jeega rip it up boy
I hate my life rofl 2 more chips 5.28 max 32m so far
seriously, no offence, but post a proper screen shot. i mean, i can't even tell what CPU clocks you are at
i don't quote in my signature, but best WR ever...i can't even make that shyt up ^^^
yeah your screenshot sucks steponz...
they are about the same i would have to say...but 1 and 3 just seemed to be better for me yesterday before i insulated, so i stuck with them.
last night i thought perhaps the CPU was causing the issues, but i am back up today with no issues at all. straight to 5.5GHz at 1.50 2133 7-7-6. so i guess that is a good thing, but it means this board did not like cold memory...or it was simply this kit of memory being bytches sub-zero 7-7-6 like they were on X58.
either way, it's a bit dissapointing
i don't quote in my signature, but best WR ever...i can't even make that shyt up ^^^
Reply With Quote
Bookmarks