*** Official HD6XXX Series Overclocking Thread ***

[zpaf]

[Shark-357]

Sry guys for asking but i have problems with setting the clock on my XFX6970 running in CF over CCC frequencies (950/1450) in Afterburner beta7. I have flashed both cards to Asus bios and enabled unofficial overclocking mode in Msi Afterburner cfg file. What am i missing here? I have the cards watercooled and would like to push them a little further than 1050Mhz with Trixx on 1.175V (if i use AB for setting the voltage Pc freezes)

[needforspeed]

Sry guys for asking but i have problems with setting the clock on my XFX6970 running in CF over CCC frequencies (950/1450) in Afterburner beta7. I have flashed both cards to Asus bios and enabled unofficial overclocking mode in Msi Afterburner cfg file. What am i missing here? I have the cards watercooled and would like to push them a little further than 1050Mhz with Trixx on 1.175V (if i use AB for setting the voltage Pc freezes)

Have you done this:

To enable unofficial overclocking in this version it is necessary to:

Set UnofficialOverclockingEULA field to the following text: I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
Set UnofficialOverclockingMode to 1 to keep PowerPlay active (may not work on old ASICs), 2 to traditionally disable PowerPlay or to 0 to temporary disable unofficial overclocking path

[Shark-357]

Great thanks for info

[Gaul]

Have you done this:

To enable unofficial overclocking in this version it is necessary to:

Set UnofficialOverclockingEULA field to the following text: I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
Set UnofficialOverclockingMode to 1 to keep PowerPlay active (may not work on old ASICs), 2 to traditionally disable PowerPlay or to 0 to temporary disable unofficial overclocking path

set 0,1, or 2 still limited 950/1450 with asus 6970 bios
even with ccc or ab v2.1. BETA 7

[Pyr0]

set 0,1, or 2 still limited 950/1450 with asus 6970 bios
even with ccc or ab v2.1. BETA 7

did you set the EULA part in the config file too?

[Gaul]

Strange
That's the right one and it should work, have you flashed your cards with Asus bios? If so try again, your info looks just like mine in GPU-z and SmartDoctor works fine here.

ok, ill reflash tomorrow

did you set the EULA part in the config file too?

yup