Ahh ok, thanks for clarifying!
So wow, you can really boot with all those 1's in subtimings? Crazy, I'll have to check that out, surely something is still not right if that's doable right?
Ohh, I see, only some of your memory will do that, I gotcha now!
I need a good 2500K too, hit me up if there is any left over still up for grabs!
~ <Mushkin Enhanced Alpha Team ~
GIGABYTE Reviews - X58A-OC ~ P67A-UD7 ~ P67A-UD4 ~ 5870 SOC
<Mushkin Reviews - 998966 Radioactive ~ 998826 Ridgeback ~ 998679 Blackline
Crucial Reviews - C300 SSD ~ Blue Tacer DDR3
Maybe it's IMC related?Just a thought,tested some gskills ripjaws,i can do 7-9-6 s-pi32M stable,but 6-9-6 or 6-10-7 is a no go,instant freeze with 1.72V.And i saw plenty results of 6-9-6 at 2133 with this kit,from what i know,i know that for PSC memory TRCD is a problematic timing not CAS...Someone willing to share a thought?
And one better from me, my CPU can't go higher with air.
[SIGPIC][/SIGPIC]
another run from today from another cpu.
losing eff due to subs not wanting to play nice...sub 5m50 is possible imo.
Originally Posted by Gautam
Nice man! Found urself a primo chip I see. That the new #1?
MB Reviewer for HWC
Team OCX Bench Team
losing eff due to subs not wanting to play nice...sub 5m50 is possible imo.
Of course it's possible sub 5.50 with those clocks. Yes your eff is not good.
Send me one of those bad CPUs..
[SIGPIC][/SIGPIC]
nice work Brian, now learn how to run 32M and you are set
i fought with the UD7 all day today and most of last night while writing an essay. went to phase at some point but it didn't help.
i can run this...below...but can't get a solid run with the 54X to go through with higher mem clocks. this chip just can't do it...or
my memory simply can't do it. might try lowering temps on the memory later this week, but they didn't like sub-zero temps at
7-7-6 on X58, so who knows. i'll blame the chip for now
sub 5.5Ghz sub 6min is definitely do-able, should be possible with the right kit, and a chip willing to run 1087MHz 7-7-6...might need
53X and 1100MHz 7-7-6 unless a few tenths can be had with better OS/wazza. i'm looking at you cheapseats...show us how its done
i don't quote in my signature, but best WR ever...i can't even make that shyt up ^^^
cranking it hard boys
well done Brian, it's definitely faster than anyone else in that Mhz range (until some of these boys find a chip at least heheh)
Maybe i have to run pi
www.ocaholic.ch
lets see a 32M
Last edited by dinos22; 02-07-2011 at 03:09 PM.
Great work Aristidis, Brian and Jody! Man you guys are F-ING KILLING IT!
wow guys you two have brilliant chips! Keep up the great work!!
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
My CPU won't go over 5.42
Setup:
MB : Gigabyte P67A UD7 ( thanks to Gigabyte office )
CPU : 2600K batch#L040B694
MEM : OCZ BLade 2000 cl 7 8 7
HDD : WD Raptor 36GB
GPU : Gigabyte GTX260 SOC
PSU : ANTEC 1200W
Vqpi :1.14 , Vmem 1.78 all set in bios
verynice
I got to admit those gigabyte boards look damn fast in 32M Dinos
dudes you wanna see brilliant chips?!!! Dumo just called me tonight and gave me the low down.
check this out:
http://www.xtremesystems.org/forums/...5&postcount=89
he has no waza tweaks. ram is slacked. board is capped under 100. he's getting a ud7 and gonna bench again on the single stage. he's been through 15 cpus and just when he was about to give up he scored this baby from microcenter this weekend. it has same code as his other chips and just got extremely lucky.
keep your eyes on dumo. he's got the best chip ive seen. If you guys dont know him he is a new yorker and it surprised me that he got a sandy because this is the last guy you would expect with a sandy. he doesnt even have a temp probe because he has been strictly amd for the last couple of years. completely skipped clarksdale etc. and all of a sudden hes been through 15 sb chips. expect the unexpected. this guy has the golden sandy bridge.
everyone knows Dumo mate, he's been around since Jesus times
I know DIno but there are a lot of new dudes in here. many of you know him from the a64 days and hes been mia until now. I'm just happy to see him back not just that but he's a fellow new yorker.. hes a really nice person and its exciting to see him ripping on something other than amd for a change.everyone knows Dumo mate, he's been around since Jesus times
when the hell is Charles going to fix vBulletin...having to scroll sideways to read a thread is getting tiring...
it shouldn't be stretching because a post at the top of the page has a large image.
i know, i know, off topic here...but this is the only thread i am reading currently
too keep it on topic, how is this...time to insulate and run this shyt at 6-7-6...
oh, and notice the timings Aida is showing? Trrd at 4...yeah, set to 1 in the BIOS. it won't let that block
get any tighter there captain dinos...wanna hook us up
Last edited by 3oh6; 02-07-2011 at 06:22 PM.
i don't quote in my signature, but best WR ever...i can't even make that shyt up ^^^
@dinos22: have you tried using the Extreme setting in the memory for the UD7? Was trying it last night and its giving me a lower score in SuperPI. Was thinking that was something like extreme profile? TIA...
Edit: what version of AIDA64 you guys using???
Last edited by maxxx; 02-07-2011 at 06:23 PM.
shouldnt make much difference Turbo to extreme but if it is slower you are running unstable due to some timings set too tight with extreme preset
Hey Jody i agree man, i hate scrolling sideways, thats stupid. Eva2000 would fix this and many other issues charles has in a millisecond, not sure why this hasnt been sorted out, it's annoying.
Scary efficiency and you are only warming up lol, cant wait for CAS6
i just spent two days and nights (was chatting to brian all day yesterday) to figure out why thei cant install Win2K3 server on the giga and can on Asus board i have. Brian disabled and turned off everything in bios and it worked for him lol and it did for me. It turns out it was USB Legacy and USB Storage settings in bios which are automatically enabled so once that was disabled it worked like a charm. It makes sense in hindsight, slaps myself.
i just installed 3 fresh OSes on a drive and made a backup. Now i need a proper CPUWill have a play end of this week
now you're on track buddy. its like a brother you havent seen in a long time and then he just comes out of nowhere ripping it up. ask kingpin or anyone that skateboards. you can only get better by thrashing with dudes that are better. the dudes that are better only get better with inspiration from the guys that they least expected to nail some phenomenal trick.
its yin and yang.
@Dinos22: thanks man. Will fiddle a bit more on the timings.shouldnt make much difference Turbo to extreme but if it is slower you are running unstable due to some timings set too tight with extreme preset
yeah, i am gonna test fate and livestream tonight ( http://www.3oh6.com/livestream/ )...why the hell not. a couple prep photos...
and the rig running behind me...
i only have LN2, so this is going to be a major PITA, but all i want to do is try and get 1067MHz to run 6-6-5
or at least 6-7-6 @ 5GHz
****edit****
that was a bust. wouldn't run 6-7-6 at 1067MHz, and couldn't even get 7-7-6 to run what it was earlier today.
CPU might be calling it quits as well. either way, i won't be improving anything with this CPU, it simply can't run
memory any faster than i have already done.
Last edited by 3oh6; 02-07-2011 at 10:15 PM.
i don't quote in my signature, but best WR ever...i can't even make that shyt up ^^^
Reply With Quote
Bookmarks