i5-2500K/2600K batch number and o/c results

[aussie-revhead]

This is not mine but it deserves some attention:


DIGI+ VRM
Load-line Calibration - High
VRM Frequency - Manual
VRM Fixed Frequency Mode - 480
Phase Control - Extreme
Duty Control - Extreme
CPU Current Capability - 140%

CPU Voltage - Manual Mode
CPU Manual Voltage - 1.38
DRAM Voltage - 1.65 (depends om memory
VCCSA Voltage - Auto
VCCIO Voltage - 1.05
CPU PLL Voltage - 1.90
PCH Voltage - 1.05
CPU Spread Spectrum - Disabled

CPU Power Management
CPU Ratio - Auto
Enhanced Intel SpeedStep Technology - Enabled
Turbo Mode - Enabled
Turbo Ratio - Maximum Turbo Ratio settings in OS
Maximum Turbo Ratio settings in OS - 50

Turbo Mode Parameters
All Auto

Advanced/CPU Configuration
CPU Ratio - Auto
Intel Adaptive Thermal Monitor - Disabled
Active Processor Cores - All
Limit CPUID Maximum - Disabled
Execut Disable Bit - Enabled
Intel Virtualization Technology - Disabled
Enhanced Intel SpeedStep Technology - Enabled
Turbo Mode - Enabled
CPU C1E - Disabled
CPU C3 Report - Disabled
CPU C6 Report - Disabled


Mobo Asus P8P67PRO
2x2ГБ DDR3 Kingston Hyper X KHX2133C9AD3T1K2/4GX (PC17000, 2133МГц, CL9)

With these settings I was able to bench at 5100 but at 1.5v plus I cant access the multi in TurboV, which of these settings disables OS multi? This new cpu has been disappointing so far.

Any of you guys have a cpu you arent happy with and may want to sell to me? 52x or higher would be nice.