Have just got my MaximusIV-Extreme and i wanted to know whats the latest bios! Currently on bios 0406!
Have just got my MaximusIV-Extreme and i wanted to know whats the latest bios! Currently on bios 0406!
I'm using the latest ''official'' one: 0901.
Everything is working fine, except Windows update messing my Win 7 install by installing ''ACS-6xxx'' drivers, confusing the NEC USB3 and Marvell SATA6 drivers with those. It was a mess. 2 hours of black screen of death, until reading somewhere how to get rid of it.
Now everything is fine. Just be careful when installing Windows Update. Be sure to NOT install, and also ''hide'', any ACS-6xxx updates or drivers. There is NO ACS-6xxx component on our board. Windows update is confused.
i7 3930k EK-Supreme HF - Asus Rampage IV X79 - QUAD-Fire: 4X Asus 7970 EK waterblocks - 4X4GB=16GB RipjawsZ 2400 CL9 - Crucial C300 128Gb M4 128Gb 2x Intel X25-M 160GB 3X Seagate 2TB - Mountain Mods Extended Ascension + Pedestal 24 - Dual-PSU: Antec HCP-1200 + Corsair AX850 - EyeFinity 3X 30'' LCD - Windows 7 64
Thanks mate on 0901 now! Have found newer one to 0951!
Loving this board alot better than my old MSI P67A- GD65 5Ghz Cas6 2232Mhz 6-10-6-27 1T 1.7v
you could post a basic configuration for 4800/5ghz bios?
Wprime 32m & 1024m [official tread] | fr4ncesco su HWbot
President of S.C.T. by fr4nc3sco & Io N-Bello, honorary member Zampagol
After hours of stability testing (and gaming), I now have my 24/7 settings with my i7 2600K and Asus Maximus IV. Temps never goes over 60 on high-load (Prime, LinX).
4900 Mhz (49X100) @ 1.35v. Great little chip.
http://valid.canardpc.com/show_oc.php?id=1635578
-Vcore = 1.35v
-Intel PLL overvolting = Auto
-VRM Frequency = 350
-Phase Control = Extreme
-Duty Control = Extreme
-LLC = 75%
-Manual RAM timings
Everything else is at auto.
I could probably push it alot more, but for now I'm happy. I was able to do 51X100 at 1.39, but didn't try to go higher Have things to do. Will try harder next week-end. Great little motherboard.
i7 3930k EK-Supreme HF - Asus Rampage IV X79 - QUAD-Fire: 4X Asus 7970 EK waterblocks - 4X4GB=16GB RipjawsZ 2400 CL9 - Crucial C300 128Gb M4 128Gb 2x Intel X25-M 160GB 3X Seagate 2TB - Mountain Mods Extended Ascension + Pedestal 24 - Dual-PSU: Antec HCP-1200 + Corsair AX850 - EyeFinity 3X 30'' LCD - Windows 7 64
A amazing board for Clocking memory!
Uploaded with ImageShack.us
Last edited by bro20000; 02-03-2011 at 01:57 PM.
Amazing chip/dimms you mean
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
Lucky bastards ... I gotta wait until march/april to get my board ... in the mean time all my new parts are sitting around doing nothing At least I got something to look forward to though
Silver Bullet VII
Corsair 750D | Corsair AX 850W | Core i7 2600K | Thermalright Venomous X | Asus Maximus IV Extreme B3
eVGA GTX680 SLI | Crucial Ballistix Sport 16GB | Intel 530 240GB | 2 x WD RED 3TB in RAID 1 | LG BluRay | 3 x 2413WFP
What ivy bridge!LOL
You can find out how the bios was set to 5ghz?
Wprime 32m & 1024m [official tread] | fr4ncesco su HWbot
President of S.C.T. by fr4nc3sco & Io N-Bello, honorary member Zampagol
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
5.1 (51X100) rock-stable at 1.42v. Was able to play Borderlands 4 hours in a row without any problems at 5.1!
-HT ON! Temps are good!
-Intel PLL overvoltage OFF
-LLC Max (100%)
-VRM freq = 350
-Phase Control = Extreme
-Duty Control = Extreme
-RAM settings manual
Everything else on Auto.
I have to work, but tonight I will try pushing it to 5.4.
http://valid.canardpc.com/show_oc.php?id=1638690
i7 3930k EK-Supreme HF - Asus Rampage IV X79 - QUAD-Fire: 4X Asus 7970 EK waterblocks - 4X4GB=16GB RipjawsZ 2400 CL9 - Crucial C300 128Gb M4 128Gb 2x Intel X25-M 160GB 3X Seagate 2TB - Mountain Mods Extended Ascension + Pedestal 24 - Dual-PSU: Antec HCP-1200 + Corsair AX850 - EyeFinity 3X 30'' LCD - Windows 7 64
Pll overvoltage off at 51x?That is a very good chip,stop primming and go test it srsly with some benches
Just before going to work, I was able to try 5.2 (52X100) at the same 1.42v, but got an error in Prime after 50 minutes. Not a BSOD, just 1 error on 1 thread.
But now I must work.
Last edited by Levesque; 02-05-2011 at 10:00 AM.
i7 3930k EK-Supreme HF - Asus Rampage IV X79 - QUAD-Fire: 4X Asus 7970 EK waterblocks - 4X4GB=16GB RipjawsZ 2400 CL9 - Crucial C300 128Gb M4 128Gb 2x Intel X25-M 160GB 3X Seagate 2TB - Mountain Mods Extended Ascension + Pedestal 24 - Dual-PSU: Antec HCP-1200 + Corsair AX850 - EyeFinity 3X 30'' LCD - Windows 7 64
Now surfing and typing this message at 5.4 (54X100) @ 1.48 with Intel PLL overvoltage OFF!
http://valid.canardpc.com/show_oc.php?id=1640461
I'm not a die-hard OCer, so I'm not confortable going over 1.5v...
i7 3930k EK-Supreme HF - Asus Rampage IV X79 - QUAD-Fire: 4X Asus 7970 EK waterblocks - 4X4GB=16GB RipjawsZ 2400 CL9 - Crucial C300 128Gb M4 128Gb 2x Intel X25-M 160GB 3X Seagate 2TB - Mountain Mods Extended Ascension + Pedestal 24 - Dual-PSU: Antec HCP-1200 + Corsair AX850 - EyeFinity 3X 30'' LCD - Windows 7 64
@levesque, might not be a die hard ocer but man that chip is real nice! 5.4 @1.4
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
I was able to boot at 5.5 (55X100) @ 1.48, PLL overvoltage OFF, but got some errors after 3 minutes in Prime. But I'm ''afraid'' to go over 1.5v. I'm a sissy.
i7 3930k EK-Supreme HF - Asus Rampage IV X79 - QUAD-Fire: 4X Asus 7970 EK waterblocks - 4X4GB=16GB RipjawsZ 2400 CL9 - Crucial C300 128Gb M4 128Gb 2x Intel X25-M 160GB 3X Seagate 2TB - Mountain Mods Extended Ascension + Pedestal 24 - Dual-PSU: Antec HCP-1200 + Corsair AX850 - EyeFinity 3X 30'' LCD - Windows 7 64
Only have to disable voltage monitoring in uefi to get rid of the bios error message.
i7 3960X@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC19200C8, Corsair force GT 240go, 2XGTX Titan, MM Ascension, Seasonic X-serie Gold 1250W, Watercooling
i7 3930K@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC17000C9, OCZ Vertex 3 120go, GTX670 DCU2 Top, MM Pinnacle, Corsair AX850, Watercooling
In MivE bios boot option disable hit 'F1' button.."
SUCCESSFUL TRADE LIST RM600k+
^^ Malaysia's Overclocking Enthusiast Community Website ^^
Find us at Facebook HERE
XS Successful Trades:
G.Skill RipjawsZ 2400C9 4X4GB - sold to easegantini | G.Skill RipjawsX 2133C8 2X2GB - bought from Dumo | 2600K 57X - bought from newhit | 3770K 6750 - bought from Viss | 3770K 6750 - sold to Sniper | 3770K IMC 2800+ - bought from Dumo | G.Skill Pi 2200C7 - bought from websmile | 3770K IMC 2933+ - bought from Viss | DomGT 2kC7 3X2GB - sold to _AntLionBR_ | G.Skill Pi 2133C8 - bought from websmile | DomP 2800C11 - bought from Alex-Ro | Pi 2000C7 - bought from websmile | GTX4 + KVR 1333C9 - bought from TaPaKaH
Bookmarks