Can't stable "Elpida Hyper" With i7-2600K

[3oh6]

my money is on hypers kicking arse on LN2 with about 1100+ clocks at 7-7-6- timings

i like where you put your money my friend. i think i will join you with that bet. now if only these sticks could run 7-7-6 sub
zero...i guess 6-6-5 will have to do



the M4E still doesn't like Hyper on 2133, but i have a hunch it is my chip. 1020MHz 7-7-6 on 1866 works fine though, i'm
banking on 1020MHz 6-6-5 working too. fingers crossed

[maxxx]

Anyone tried them Corsair GTX3's on these Sandy Bridge chips? Or they are better of on an x58 platform?

Apologies for being out of topic...

[1Day]

WPrime 1024 Mil

2.15.141



Hypers @ 2133MHz 7-7-7 1.74 Vdmm

[stasio]

5.7 GHz, VCore only 1.116V !

[Hondacity]

Anyone tried them Corsair GTX3's on these Sandy Bridge chips? Or they are better of on an x58 platform?

Apologies for being out of topic...

they work better than gtx4s ..on the m4e

[1Day]

5.7 GHz, VCore only 1.116V !

Idiot that I was I had the wrong CPU-z installed on that OS.

Here is the correct vcore

[OC Maximus]

Very nice 1Day. I need a golden egg.

[1Day]

Very nice 1Day. I need a golden egg.

I have been benching for nearly 5 years. My very first CPU was golden. A E6420 which started me on this benching hobby. And finally now I have a good CPU again.

Now I just need to learn how to get the best out of it.

I hope you find yours soon my friend. At least when you do you will know what to do with it.

[dinos22]

WOW Clare, jealous

[OC Nub]

I was playing around with 1m and hyperx kit, does anyone know how I can validate a submission using SPi 1.5 XS mod to HWbot?

[Splave]

okay here are my findings

hypers on
MSI GD65
2133 at any cas will not boot. tried 7-8-7 7-7-7 7-9-7 7-10-7
1866 at 7-7-7 or 7-8-7 will boot up to 5ghz maximum! will only run 32m at 4.9ghz :X

PSC (GTX3)
MSI GD65
2133 7-10-7 boots and runs 32m at 5.2ghz

hypers
ASUS p8p67 deluxe
2133 7-8-7 and 7-7-7 both work fine. Max board will boot is 100x51 which runs superpi stable

PSC
ASUS p8p67 deluxe
2133 7-9-7 works fine, same max as hypers 100x51 32m stable.


Soooo, imo its board dependent. gd65 hates hypers, but loves psc. With psc it hit the max speed ive gotten out of the chip.
On the asus board it loves the hyper and also runs the psc to spec. What else would explain this? The chips imc magically chained when I took it out of the socket?


I have another 2600k should be here monday and will do some more fiddling.

[chew*]

What else would explain this? The chips imc magically chained when I took it out of the socket?

It tells us that MSI and hypers just do not like you remember x58 xpower

[maxxx]

they work better than gtx4s ..on the m4e

@Hondacity: Salamat (Thanks) for that.

@1Day: great chip there....

[stasio]

Soooo, imo its board dependent. gd65 hates hypers, but loves psc. With psc it hit the max speed ive gotten out of the chip.
On the asus board it loves the hyper and also runs the psc to spec. What else would explain this? The chips imc magically chained when I took it out of the socket?


I have another 2600k should be here monday and will do some more fiddling.

Thanks Splave for testing.Do you think is only board depend or BIOS depend (of course +IMC).

[OC Maximus]

Nice work Splave!

[Splave]

Thanks Splave for testing.Do you think is only board depend or BIOS depend (of course +IMC).

Ive played with the 3 latest msi bios and they all acted the same so far. I will be able to tell more with a new chip

@chew indeed the ram gods are frowning on my msi boards

[dinos22]

i bought a retail chip and finally stock came in today

ing dog in terms of CPU Mhz > ~5325Mhz max or so

in terms of ram clocking its even better than my ES eeek, this chip will boot into windows with 1.1vQPI/VTT and 1.74vdimm and run up to 8M SuperPi , i had to bump QPI/VTT to 1.14 (didnt test 1.12 yet) and its fine with 32M SuperPi too now, so lower vdimm and much lower QPI too eeeek

and it runs same frequency at 4.5GHz and 5.3Ghz, here's 5.3Ghz in windows 7

i havent yet figured out voltage sweetspots so this will probably go even lower

[OC Maximus]

Good to hear Dinos. Should have my #2 tomorrow night, hoping for the best.

[PatRaceTin]

I sold my elpida hyper and run smooth with this

G.Skill [ Ripjaws-X ] F3-17000CL9D-4GBXL
CAS Latency 9-11-9-28-2N





This kit dont like low CL but stable @ 2133 9-10-9-26 ~1.60V

[dinos22]

IMC is decent on this retail

i was close to running 1092Mhz as well but worried i will kill the ram with too much voltage,,,, more with KPs RAMdominance pot

it is a bit tricky hitting high speeds but nothing that easytune cannot do

[Alex-Ro]

Yeap,seems board dependent hyper problems with SB.My hypers won't boot 1866 cas 6,2133 cas 7 on Asrock P67 Extreme6,will run 1866 decently,but 2133 is stable only for S-pi 1M and some 3d benchmarks,at 8-8-8,no matter voltage(give them up to 1.8,no results).Some G.skill will arrive today,i'll test them to see what's going on,so far i reached for S-pi 32M 1866 7-7-6 32M stable at 1.75(same mem worked like charm on P55,memtest stable at 1.6 ).

My chip is decent,too bad it will do 32M and vantage at 5520 with 1.5,but it wont scale 10 mhz more even with 1.65

[C-N]

My chip is decent,too bad it will do 32M and vantage at 5520 with 1.5,but it wont scale 10 mhz more even with 1.65

Still a very decent chip though... Intel got to keep something back for a stepping change lol

[dinos22]

id be happy with 5.5GHz heheheh

[Johnny87au]

Dinos that with 1.8 dram ? Also has there been a fix with the ud7 running ram past 2133+ or is that only with hypers?? I got a UD7 on the way atm, and yes i know about the sata 2 incident but doesnt phase me as i use a raid card..

[st0ned]

I know I aint in this "league" but, at 5.1Ghz what allowed me to go from 800 cl9-9-9-24 to 933 cl10-11-10-28 1T ( my ram sucks ), that wouldn't run 1 LinX without error, it was lowering the CPU PLL, I'm running 1.55v atm, from the 1.8v default. I know that extreme ppl arent fans of volt lowering... but give it a shot