doesnt vtt help at all mate
i found the only way to run my hypers with 2133 ratio is to have a sweetspot with VTT on both UD5 and UD7 with same volts 1.24v, 1.22v is almost there, and 1.26 doesnt like it
doesnt vtt help at all mate
i found the only way to run my hypers with 2133 ratio is to have a sweetspot with VTT on both UD5 and UD7 with same volts 1.24v, 1.22v is almost there, and 1.26 doesnt like it
that's quite a lot vccsa if you ask me - I am having similar issues with my hypers.Originally Posted by dinos22
0.95V vccsa - 1.15V vccsa will boot 2133 with my hyper but freezes on 32m instantly. does your setup gives instant freezes on 32m initial below let's say 1.15V vccsa?
PS: stop calling it vtt - you confuse me every time
| '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
| '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
| '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67
| '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
| '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
| '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
| '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled
| '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW
sof pulled a fermi on all of us !!!
in jeeegabyte world its still QPI/VTT
yes it scales, if i donthave these volts i cannot boot at all lol
VCCIO should be qpi/vtt/IMC voltage...that's quite a lot vccsa if you ask me - I am having similar issues with my hypers.
0.95V vccsa - 1.15V vccsa will boot 2133 with my hyper but freezes on 32m instantly. does your setup gives instant freezes on 32m initial below let's say 1.15V vccsa?
PS: stop calling it vtt - you confuse me every time
VCCSA is system agent
or maybe i'm wrong (still don't touched the biatch)
Good to hear that Gigabyte still call it QPI/VTT
i thought he meant VTT hahah
system agent doesnt do
hahahahaha, looks like every chip is different, without putting system agent on 0.975 I cannot boot at 2133 CL8 at all. Also to be stable VTT has to be around 1.18-1.20 on my UD7.i thought he meant VTT hahah
system agent doesnt do
EVGA Classified (MSI XPower), 980X (i5 661, i5 680, i7 950, E8600, QX9650, E8400), Thermalright Venomous X , Kingston Hyper X 2000Mhz, MSI 480GTX (5870, 4870x2, Visiontek 3870 x2, XFX 8800GT w/HR03GT), DELL E248WFP, CM Silent Power Pro 1000W, Seagate 1TB + 1TB + 500GB+500GB, Auzentech X-Plosion, CM Bench Station, AL 641, MX 518, New G15 Keyboard
thats interesting, yeah man i would test every chip i have for all those options again, this is a new platform and we are all still learning obviously
interesting about that with the hypers. was able to play with it today for the first time and made no adjustments on the MIVE voltage wise and they were happy as could be at 2133 7-7-6-20 @1.69v....:/that's quite a lot vccsa if you ask me - I am having similar issues with my hypers.
0.95V vccsa - 1.15V vccsa will boot 2133 with my hyper but freezes on 32m instantly. does your setup gives instant freezes on 32m initial below let's say 1.15V vccsa?
PS: stop calling it vtt - you confuse me every time
Reply With Quote
Bookmarks