ASUS P8P67 Pro/Evo/Deluxe OC discussion thread

[MaStA]

Hi guy

I just finiched my new p8p67 deluxe with 2500k cpu system and the pc wont boot... the cpu led is red. Is it normal? shoudn't be green?

also, I have corsair CM3X2G1600C9DHX memory. I know it isn't in the QVL. Maybe it is the problem...?

Thanks

Hmm...you did plug both the 24 pin and 8 pin power cords into the motherboard correct? Try resetting the CMOS and I think that Mem OK thing on board is supposed to auto configure your ram or something, but I haven't really messed with it much. Also, try one stick of ram opposed to all of them.

[Prestone]

Hmm...you did plug both the 24 pin and 8 pin power cords into the motherboard correct? Try resetting the CMOS and I think that Mem OK thing on board is supposed to auto configure your ram or something, but I haven't really messed with it much. Also, try one stick of ram opposed to all of them.

(...)

I get two problem there: The first is the really stupid one: my 12v atx wasn't plugged with the extention... the second was an ram incompatibility with the mobo. So I get two 4Gb kits of G.Skill 1600 and it goes as a new!

An other question: I have desactivated all the energy savings but the core ratio is still moving between 16x on idle and 33x on load... Why?

Thanks

[Prestone]

(...)

I have desactivated all the energy savings but the core ratio is still moving between 16x100 on idle and 33x100 on load... Why?

Up!

No Ideas?

[orion23]

Up!

No Ideas?

Bios 1253 is pretty good at keeping a constant speed, even with speedstep enabled.

Under Bios 1053 or 1204 you need to disable:
Speedstep
C1E
C3
C6