Hi guys, i need yor help, i would like push my q6600 as much as i can on air for now. Currently running 3.4 Ghz at 1.3V and vid is 1.2875V but even with this settings is not 100% stable it fails IBT at extreme settings in second linpack and temp was 62 C max at that test otherwise 28 - 30 idle with
IFX-14 and two gentle typhoons. Please have look at my bios and give me advice. Thank you

ASUS P5Q DLX Template : 3.4

JumperFree Configuration Settings
AI Overclock tuner: M
CPU Ratio Setting: 9x
FSB Strap to North Bridge: A
FSB Frequency: 380
PCI-E Frequency: 100
DRAM Frequency: 1013
DRAM CLK Skew on Channel A1: A
DRAM CLK Skew on Channel A2: A
DRAM CLK Skew on Channel B1: A
DRAM CLK Skew on Channel B2: A
DRAM Timing Control: M

1st Information :

CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 15
RAS# to RAS# Delay : 3
Row Refresh Cycle Time: 55
Write Recovery Time: 6
Read to Precharge Time: 3

2nd Information :

READ to WRITE Delay (S/D): 7
Write to Read Delay (S): 3
WRITE to READ Delay (D): 5
READ to READ Delay (S): 4
READ to READ Delay (D): 5
WRITE to WRITE Delay (S): 4
WRITE to WRITE Delay (D): 7

3rd Information :

WRITE to PRE Delay: 14
READ to PRE Delay: 5
PRE to PRE Delay: 1
ALL PRE to ACT Delay: 6
ALL PRE to REF Delay: 6
DRAM Static Read Control: D
DRAM Read Training: D
MEM. OC Charger: E
AI Clock Twister: Lighter
AI Transaction Booster: M10

CPU Voltage: 1.325
CPU GTL Voltage Reference (0/2): A
CPU GTL Voltage Reference (1/3): A
CPU PLL Voltage: 1.52
FSB Termination Voltage: 1.30
DRAM Voltage: 2.02
NB Voltage: 1.24
NB GTL Reference: A
SBridge Voltage: 1.10
PCIE SATA Voltage: 1.50

Load Line Calibration: E
CPU Spread Spectrum: D
PCIE Spread Spectrum: D
CPU Clock Skew : A
NB Clock Skew : A

Advance CPU Settings
CPU Ratio Setting: 9
CPU VID: 1.2875
C1E Suppport: D
Max CPUID Value Limit: D
Intel® Virtualization Tech: D
Vanderpool Technology:
CPU TM Function: E
Execute Disable Bit: E