Ah, the SS is probably what pushed you past huh?Originally Posted by Diabolo80
Once my weather gets cold enough again I will try this for a late night run, thank you!
Just Air cooling with 80mm fan on IOH chip.
My favorite BIOS is 9124.
My 980X has BCLK 250MHz wall.
So maybe my REX3 can pass over BCLK 250MHz w/o slow mode with good chip.
BCLK limit depend on CPU & IOH quality.
So you had better to check other mobo, the first.
If other mobo can pass more BCLK speed, IOH is not so good.
But same BCLK wall, it's CPU limit.
If you want to more BCLK speed, please try as follow setting.
IOH Vcore: 1.40v - 1.46V
ICH Vcore: 1.15v - 1.20V
IOH & ICH PCI-E V: 1.60V
(Please be care of NB & SB chip temp.)
B'regs.
Would those volts put off too much heat for a water block to whisk away? I would like to put my entire system under water (mobo, board, gpu) with a 480, 360, 240 radiator setup so I can have a very silent PC with still great temps. I hope those temps will help me push a higher BCLK with stable QPI in non-slowmode.
Great thread, thanks guy's.
Does anyone know if it's possible to connect an 8pin 12v from another psu into the second slot? without my REXIII blowing upMy psu only has one of these connectors.
Are you looking to do so for benching purpose, or just for everyday purpose?
Reply With Quote
Bookmarks