Modded ASUS P5Q/Pro/Deluxe/Premium BIOS

[R0B]

Megaupload stop accepting this package - I tried a few times with different packing styles and all files were rejected. I've uploaded to hotfile.com. I hope Ket won't mind

Download Link

Packed with 7zip.

Thank you very very much!!!

[Prof_Chaos]

i have p5q deluxe with kingston 8500 2x2GB and in memtest its giving me errors in test 6 and 7 when i set it to 1066 and 2.2v . Does modded bios fix the problem ? i have now the latest official bios 2301.The memory modules are not faulty.This problem is common as i read in asus forums.

[deadman3000]

Can anyone recommend a 4GB 800Mhz kit?

[galactob]

i have p5q deluxe with kingston 8500 2x2GB and in memtest its giving me errors in test 6 and 7 when i set it to 1066 and 2.2v . Does modded bios fix the problem ? i have now the latest official bios 2301.The memory modules are not faulty.This problem is common as i read in asus forums.

My friend me too this problem. iput 2.3v but i have error again and work now 920

[scharnhorst]

please my friend. send me the settings from the motherboard. can hardly go into 4 with less than 1.38v. i have 2201. thanks

I'm sorry I've just seen your message.


Ai Overclock Tuner ..............[Manual]
CPU Ratio Setting ............... [9]
FSB Frequency ...................[460]
PCIE Frequency ..................[100]
FSB Strap to North Bridge ....[333]
DRAM Frequency ................[920]
DRAM Clock Skew on Channel A1 ...... [NORMAL]
DRAM Clock Skew on Channel A2 ...... [NORMAL]
DRAM Clock Skew on Channel B1 ...... [NORMAL]
DRAM Clock Skew on Channel B2 ...... [NORMAL]
DRAM Timing Control ................ [Manual] (5-5-5-15)
SET TRFC to 55
DRAM Static Read Control ........... [Disabled]
DRAM Read Training ................. [Disabled]
MEM. OC Charger .................... [Enabled]
Ai Clock Twister ................... [LIGHT]
Ai Transaction Booster ............. Auto
____________________________________

CPU Voltage .......................[1.265]
CPU GTL Voltage Reference (0/2) .Default Value
CPU GTL Voltage Reference (1/3) .Default Value
CPU PLL Voltage .................[1.52]
DRAM Voltage ....................[1.8]
vFSB.................................1.26
NB Voltage ........................[1.22]
NB GTL Reference ...............default value
SB Voltage ........................lowest value
PCIE Voltage ......................Lowest value
____________________________________

Load-Line Calibration .............. ENABLED
CPU Spread Spectrum ................ [Disabled]
PCIE Spread Spectrum ............... [Disabled]
CPU Clock Skew ....................NORMAL
NB Clock Skew ......................NORMAL
CPU Margin Enhancement ........[PERFORMANCE]

[deadman3000]

I need a dl link for the last Deluxe mod. Thx.

[galactob]

I'm sorry I've just seen your message.


Ai Overclock Tuner ..............[Manual]
CPU Ratio Setting ............... [9]
FSB Frequency ...................[460]
PCIE Frequency ..................[100]
FSB Strap to North Bridge ....[333]
DRAM Frequency ................[920]
DRAM Clock Skew on Channel A1 ...... [NORMAL]
DRAM Clock Skew on Channel A2 ...... [NORMAL]
DRAM Clock Skew on Channel B1 ...... [NORMAL]
DRAM Clock Skew on Channel B2 ...... [NORMAL]
DRAM Timing Control ................ [Manual] (5-5-5-15)
SET TRFC to 55
DRAM Static Read Control ........... [Disabled]
DRAM Read Training ................. [Disabled]
MEM. OC Charger .................... [Enabled]
Ai Clock Twister ................... [LIGHT]
Ai Transaction Booster ............. Auto
____________________________________

CPU Voltage .......................[1.265]
CPU GTL Voltage Reference (0/2) .Default Value
CPU GTL Voltage Reference (1/3) .Default Value
CPU PLL Voltage .................[1.52]
DRAM Voltage ....................[1.8]
vFSB.................................1.26
NB Voltage ........................[1.22]
NB GTL Reference ...............default value
SB Voltage ........................lowest value
PCIE Voltage ......................Lowest value
____________________________________

Load-Line Calibration .............. ENABLED
CPU Spread Spectrum ................ [Disabled]
PCIE Spread Spectrum ............... [Disabled]
CPU Clock Skew ....................NORMAL
NB Clock Skew ......................NORMAL
CPU Margin Enhancement ........[PERFORMANCE]

i try this but not working to me. not open the pc !!!! thank you !!!

[Solo1]

Hi Folks -
I just picked up a Turbo Pro board and would like to know several good overclockable compatible memory options that work well. The official list is usually so dated.

Thank you

[-Acid-]

would either ket's or mrosen bios filkes work on a p5q ws,


Friend if finaly letting me tweak him rig after running stock for two years (cheaper than an upgrade, and a huge speed boost to be had)

p5q ws
qx6700
2x2gb ocz flex 2 pc9600
280 h20
d5 vario (lowest setting)
everything is water cooled even the northbridge and its run at stock

[jigita]

new bios for P5q -2209

[stryfe]

I was surprised to see that this thread was still active. I have used Kets modified bios to improve my system memory problem in 2009

I still have problems, but would like to use the bios for P5Q Pro that Ket posted in June 2010. The download linke does not work

Could anyone share the latest P5Q pro modified bios? Thanks!!

System problem. 5 out of 10 times system starts then stops and starts again. If that happens the system would boot into windows or hangs.
Anyone got the below config working?

Asus P5Q Pro
OCZ Reaper 2*2gb 1066 HPC
Nvidia 9700GT PCIE

Help greatly appreciated

[CoreyPL]

Stryfe, here you go:

File name: P5Q Mods 2010.06.7z File size: 2.76 MB
(packed with 7zip)

[galactob]

Stryfe, here you go:

File name: P5Q Mods 2010.06.7z File size: 2.76 MB
(packed with 7zip)

This is the Ket mod bios ??????????

[CoreyPL]

This is the Ket mod bios ??????????

Yes, all modded by Ket.

[galactob]

Yes, all modded by Ket.

ok my frind. Thanks !!!!!

[stryfe]

Stryfe, here you go:

File name: P5Q Mods 2010.06.7z File size: 2.76 MB
(packed with 7zip)

Thanks I am going to try this tonight. Hopefully it is going to work otherwise I need to ditch the OCZ Reapers and get myself some decent Corsair sticks.

[CoreyPL]

Thanks I am going to try this tonight. Hopefully it is going to work otherwise I need to ditch the OCZ Reapers and get myself some decent Corsair sticks.

stryfe, if I were you, I would first check if there isn't any problems with PSU. If you can, borrow another PSU and test it. But it's not the thread for this Make a new thread in appropriate section and get support for your problem.

[chenxuwen]

Guys, here is my newest modded P5Q PRO BIOS with
P5Q PREMIUM CPUID,
P5Q PRO TURBO MEMORY TABLE,
Intel RST 10.0.0.1046 ,
MARVELL L73,
Alienware SLIC. I am using it. Enjoy.

http://www.multiupload.com/7RUR2GIIL1

[Viper780]

Is there an updated Bios for the P5Q Dlx? (the last one on the Asus Page is the 2301 from a year ago)

[Ket]

I just have to ask.. are people really having that much fun still with my mobbed BIOSes on the P5Q boards? Thought people would of been bored of them by now

[xsman]

I just have to ask.. are people really having that much fun still with my mobbed BIOSes on the P5Q boards? Thought people would of been bored of them by now

Happy New Year to all!!!

Hey Ket, many P5Q users are still looking to improve their system stability and overclock with modded BIOS... some with success... many w/o...

It's been quite a long while since your last visit to overclock.net... I've been referencing your modded BIOSes in my P5Q PRO Turbo/PRO/Turbo owners club there... mind give me another helping hand there?

I love XtremeSystems!!! Happy New Year!!!

[Ket]

Hmm.. well.. it takes ages modding P5Q series because Asus mix up what hardware they use in them so much.. some boards using marvell gbit, others using realtek or some other POS gbit.. I have to find O-ROMS for them all. I can't remember what set of BIOSes it was but with one batch I did update all the following stuff;

- P6 table (CPU compatibility, new CPUs etc)
- Memory table
- Intel SATA RAID O-ROM
- Marvell O-ROM

Right now I'm working on a mBIOS for the Asrock 890FX Deluxe 3, proving to be a real pain in the arse because AGESA code is injected directly into the main BIOS (1B) module with AMI

[virusek]

Updated chenxuwen mod for P5Q3 Deluxe BIOS 2105

P5P43TD PRO Memory Table 0710
INTEL RAID OROM 10.1.0.1008
MARVELL OROM L73
Alienware SLIC 2.1

http://www.multiupload.com/81IKMYWPMA

I use it right now.

[sy5tem2]

Hello

any chance that those mBIOS would resolve sstuff wit bootrom being "too small" and preventing ich10r from working with ocz revodrive + ati 6950?

ERROR: Not enough Space to copy PCI Option Rom [00:1F:02]


thank you, been searching for day for a solution!

[Ket]

Theres limited space available within the BIOS to be able to update O-ROMs and stuff like that. One trick you could try if you are attempting to mod the BIOS is to replace the boot logo with something much smaller then try inserting the new O-ROM.