**Gigabyte GA-X58A-UD7 OC-Tips-Bios-Discussion Thread**

[OC Nub]

I could fill out a template but I dont think the same settings would even work for GT 980x.

Advanced CPU Features:
CPU Clock Ratio .........................[21]
Intel(R) Turbo Boost Tech ...............[DISABLED]
CPU Cores Enabled .......................[All]
CPU Multi Threading .....................[ENABLED]
CPU Enhanced Halt (C1E) .................[Disabled]
C3/C6/C7 State Support ..................[DISABLED]
CPU Thermal Monitor .....................[ENABLED]
CPU EIST Function .......................[Disabled]
Bi-Directional PROCHOT ..................[Disabled]
Virtualization Technology ...............[Disabled]


Uncore & QPI Features:
QPI Clock Ratio..........................[36x]
QPI Link Speed ..........................[7.2GHz] 7.74
Uncore Clock Ration......................[17x] 16x
Uncore Frequency ........................[3400MHz] 3440
Isonchronous Frequency ..................[Disabled]


Standard Clock Control:
Base Clock (BCLK) Control ...............[ENABLED]
BCLK Frequency (MHz) ....................[200] 215
PCI Express Frequency (MHz) .............[105] 103, if fails try 105.


Advanced Clock Control:
CPU Clock Drive .........................[700mV] 800
PCI Express Clock Drive .................[700mV] 900
CPU Clock Skew ..........................[0ps]
IOH Clock Skew ..........................[0ps]


Advanced DRAM Features:
Performance Enhance .....................[TURBO]
Extreme Memory Profile (X.M.P) ..........[DISABLED]
System Memory Multiplier (SPD) ..........[8.0]
Memory Frequency (Mhz)...................1720mhz
DRAM Timing Selectable (SPD) ............[QUICK]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ........................[7]
tRCD ....................................[7]
tRP .....................................[7]
tRAS ....................................[20]
Command Rate (CMD).......................[1]

Channel Interleaving.....................[6]
Rank Interleaving........................[4]

Advanced Voltage Control:
Load Line Calibration ...................[LEVEL2] level 1
CPU Vcore 1.20000v.......................[1.35000v] 1.450-1.4625v
QPI/VTT Voltage 1.175v ..................[1.355v] 1.335-1.355v
CPU PLL 1.800v ......................... 1.60v
PCIE 1.500v ............................. Normal
QPI PLL 1.100v ..........................1.16v
ICH I/O 1.500v .......................... Normal
IOH Core 1.100v ......................... 1.16v


DRAM
DRAM Voltage 1.500v .....................[1.66v]
DRAM Termination 0.750v..................[AUTO] normal
Ch-A Data VRef. 0.750v ..................[AUTO] normal
Ch-B Data VRef. 0.750v ..................[AUTO] normal
Ch-C Data VRef. 0.750v ..................[AUTO] normal
Ch-A Address VRef. 0.750v ...............[AUTO] normal
Ch-B Address VRef. 0.750v ...............[AUTO] normal
Ch-C Address VRef. 0.750v ...............[AUTO] normal