MMM
Page 2 of 2 FirstFirst 12
Results 26 to 41 of 41

Thread: Q6600 - What about Temperature?

  1. #26
    Xtreme X.I.P.
    Join Date
    Jun 2007
    Location
    Bend, Oregon
    Posts
    5,693
    Quote Originally Posted by Lafas1987 View Post
    I want to ask a big sorry.

    I didn't remember my loop order.

    My Loop was with the right order aka, tank > pump > CPU > Radiator >>>> tank.

    My Temps on Full Load:
    OCCT:
    63C
    63C
    55C
    55C

    Under Full Load Prime95 the temps are about 3~4C higher than OCCT.

    The bad thing is that under linkpack (Intel Burn Test / maximum stress) the temps are insane!
    90C
    90C
    81C
    81C

    The test always completes successfully!

    Any Opinions?

    Thanks a lot!
    I'm still running my Q6600 at 3.6 1.44V, depending on ambients OCCT hits 40-45C...Linpack is pretty extreme.

    But...if you complete that succesfully, don't worry about it...call it success. I personally think OCCT is more than stressful enough for my uses. About the hardest thing I do is render HD video for 20 minutes and it's at most taxing 80% or so. Linpack is nuts stressfull..

  2. #27
    Registered User
    Join Date
    Jul 2007
    Location
    Athens
    Posts
    58
    Quote Originally Posted by Martinm210 View Post
    I'm still running my Q6600 at 3.6 1.44V, depending on ambients OCCT hits 40-45C...Linpack is pretty extreme.
    Hmmm...
    Are your Full Load Temps about 40-45C?
    Very Low Temps!
    Awesome!

    Quote Originally Posted by Martinm210 View Post
    But...if you complete that succesfully, don't worry about it...call it success. I personally think OCCT is more than stressful enough for my uses. About the hardest thing I do is render HD video for 20 minutes and it's at most taxing 80% or so. Linpack is nuts stressfull..
    Yeah, i know that i will never Load my CPU as Linpack does, but if we want to talk about Full Load, have we got to talk with Linpack or not?
    iMac 27" (mid 2011) Intel i5 2.7GHz, 12GB 1333MHz, Mac OSX Mountain Lion / iPad 3 16GB | White / iPhone 5 16GB | White
    FX 8150 oc@4.6 Ghz 1.38V / ASUS Crosshair V Formula / 16GB Kingston HyperX 1600MHZ / ASUS EAH 5870 1GB / Intel 320 Series 120GB / Silverstone Tj07 - Black / Corsair TX750v2 / Windows 8 Pro x64
    Apogee HD/Heatkiller GPU-X?/MPC655/360 Radiator

  3. #28
    Xtreme X.I.P.
    Join Date
    Jun 2007
    Location
    Bend, Oregon
    Posts
    5,693
    Quote Originally Posted by Lafas1987 View Post
    Hmmm...
    Are your Full Load Temps about 40-45C?
    Very Low Temps!
    Awesome!


    Yeah, i know that i will never Load my CPU as Linpack does, but if we want to talk about Full Load, have we got to talk with Linpack or not?
    Yeah, I got pretty lucky with this chip (Quad rad doesn't hurt either), ran quite a bit cooler than my E6600 did.

    Here is my old test I ran a while back using Prime 95:


    http://www.xtremesystems.org/forums/...d.php?t=206712

    Of coarse now that it's winter with a wood stove, I see ambients fluctuate anywhere from 60F-80F depending on how much I let my wife roast me out..

    Right now there is about 4" of snow on the ground and I'm roasting in my shorts and tanktop in the house..

    Supposed to get down to -3F over the next couple of days, so I can expect the house to be 90F

  4. #29
    Registered User
    Join Date
    Jul 2007
    Location
    Athens
    Posts
    58
    Yes, i see.
    I think that you have the one and only Q6600 who is so Cold!

    I would like to know temperatures from other set ups with Q6600 with a normal Watercooled Loop.

    Ek Supreme looks very good waterblock!
    iMac 27" (mid 2011) Intel i5 2.7GHz, 12GB 1333MHz, Mac OSX Mountain Lion / iPad 3 16GB | White / iPhone 5 16GB | White
    FX 8150 oc@4.6 Ghz 1.38V / ASUS Crosshair V Formula / 16GB Kingston HyperX 1600MHZ / ASUS EAH 5870 1GB / Intel 320 Series 120GB / Silverstone Tj07 - Black / Corsair TX750v2 / Windows 8 Pro x64
    Apogee HD/Heatkiller GPU-X?/MPC655/360 Radiator

  5. #30
    Xtreme Member
    Join Date
    Apr 2008
    Location
    Montreal
    Posts
    213
    I had a q6600 with a 4870 on a swiftech triple, I don't recall seeing it break 75c, even in summer. Had it @ 3.8, 1.46v. Idle low 40s, load high 60s.
    [SIGPIC][/SIGPIC]


    i3 530 @ 4.2 ghz, evga FTW, 4 gig gskill trident @ 1600 6-8-6-24, XFX 4870 1gb, corsair 620hx, 2 x kinston 64gig ssd raid0, 300 gig Velociraptor, 2Tb WD green,
    Tagan black pearl (lian-li v2000)
    Water: mcp655, mcr320 with ultra kazes, GTZ, mcr60, micro-res,
    black primochill, bitspower comp. fittings
    Quote Originally Posted by Afghan Mac View Post
    We'll spend a few hundred bucks because the color isn't quite right. We have no qualms voiding warranties on a thousand dollar item the day we get it.

  6. #31
    Registered User
    Join Date
    Jul 2007
    Location
    Athens
    Posts
    58
    ^^

    Linpack load?
    iMac 27" (mid 2011) Intel i5 2.7GHz, 12GB 1333MHz, Mac OSX Mountain Lion / iPad 3 16GB | White / iPhone 5 16GB | White
    FX 8150 oc@4.6 Ghz 1.38V / ASUS Crosshair V Formula / 16GB Kingston HyperX 1600MHZ / ASUS EAH 5870 1GB / Intel 320 Series 120GB / Silverstone Tj07 - Black / Corsair TX750v2 / Windows 8 Pro x64
    Apogee HD/Heatkiller GPU-X?/MPC655/360 Radiator

  7. #32
    Xtreme Member
    Join Date
    Jul 2008
    Posts
    319
    I run a q6600 @ 3.6ghz on a single 120.2 thermochill with a gtx 260 in the loop, idles at 44C, and loads at 65-68C. When the loop gets hot enough my 2nd 120.2 thermochill fans kick on, and temps at load drop to around 55-60C depending on the ambient. System is whisper quiet though with 2 fans on.
    MM H2gO - Win 7 Pro
    2 PA120.2 Thermochill
    MCP355 w/XSPC res top
    i5-2500k @ 5.0ghz w/Heatkiller 3.0
    Corsair HX850 - M IV Gene-z
    GTX 480 w/DD 480 ni/cu

  8. #33
    Xtreme Member
    Join Date
    Jul 2009
    Location
    Sydney - Australia
    Posts
    223
    If it helps i have a q6600 on a TRUE @3.4GHz 1.4V and i reach 70C load with an ambient of around 26C or so.
    ASUS Rampage Formula X48 (Bios 1002 SoLoR MOD) | Intel Q6600 @ 3.6GHz (8x450) | 2x2GB GSKILL F2-9600CL5-2GBTD @ 1200Mhz
    XSPC Rasa + RX360 | Antec P182 | Xonar ST+H6 | XFX Black Edition 850W | BFG 280GTX OC 713/1458/2646 1.149V

  9. #34
    Registered User
    Join Date
    Jul 2007
    Location
    Athens
    Posts
    58
    I have
    63C
    63C
    55C
    55C
    (OCCT)
    with ambient around 19-20C....
    If i change my cpu block i think i can decrease arround 3-4C.
    My current block is
    iMac 27" (mid 2011) Intel i5 2.7GHz, 12GB 1333MHz, Mac OSX Mountain Lion / iPad 3 16GB | White / iPhone 5 16GB | White
    FX 8150 oc@4.6 Ghz 1.38V / ASUS Crosshair V Formula / 16GB Kingston HyperX 1600MHZ / ASUS EAH 5870 1GB / Intel 320 Series 120GB / Silverstone Tj07 - Black / Corsair TX750v2 / Windows 8 Pro x64
    Apogee HD/Heatkiller GPU-X?/MPC655/360 Radiator

  10. #35
    Registered User
    Join Date
    Jul 2007
    Location
    Athens
    Posts
    58
    Hello again!
    I want opinion about the following cpu clocks.

    http://www.frozencpu.com/products/97...66.html?tl=g30

    vs

    http://www.frozencpu.com/products/85...2_AM2_AM3.html

    Thanks.
    iMac 27" (mid 2011) Intel i5 2.7GHz, 12GB 1333MHz, Mac OSX Mountain Lion / iPad 3 16GB | White / iPhone 5 16GB | White
    FX 8150 oc@4.6 Ghz 1.38V / ASUS Crosshair V Formula / 16GB Kingston HyperX 1600MHZ / ASUS EAH 5870 1GB / Intel 320 Series 120GB / Silverstone Tj07 - Black / Corsair TX750v2 / Windows 8 Pro x64
    Apogee HD/Heatkiller GPU-X?/MPC655/360 Radiator

  11. #36
    Registered User
    Join Date
    Jul 2007
    Location
    Athens
    Posts
    58
    With better block mounting, i have decrease temperature.
    Now i have -5C @ Idle and -7C @ Full Load!
    iMac 27" (mid 2011) Intel i5 2.7GHz, 12GB 1333MHz, Mac OSX Mountain Lion / iPad 3 16GB | White / iPhone 5 16GB | White
    FX 8150 oc@4.6 Ghz 1.38V / ASUS Crosshair V Formula / 16GB Kingston HyperX 1600MHZ / ASUS EAH 5870 1GB / Intel 320 Series 120GB / Silverstone Tj07 - Black / Corsair TX750v2 / Windows 8 Pro x64
    Apogee HD/Heatkiller GPU-X?/MPC655/360 Radiator

  12. #37
    Xtreme Enthusiast
    Join Date
    May 2009
    Location
    Upstate, SC
    Posts
    644
    that still seems hot for linpack... mines at 1.58 in bios and shows 1.51 under load and it idles around 42 and peaks at 78 or so in linpack... then again its been a while...
    SYSTEM
    i5-3750K @ 4.6ghz - ASRock Z77 Extreme4 - 16GB Samsung DDR3 - Sapphire R7 370 Nitro 4GB
    Water Cooling
    EK Supremecy - DDC-3.2 w/XSPC Top -Swiftech MCR320-QP - EK Multioption 150

  13. #38
    Registered User
    Join Date
    Jul 2007
    Location
    Athens
    Posts
    58
    So, with a better block i will decrease temps huh?
    Next month i will buy swiftech xt!
    iMac 27" (mid 2011) Intel i5 2.7GHz, 12GB 1333MHz, Mac OSX Mountain Lion / iPad 3 16GB | White / iPhone 5 16GB | White
    FX 8150 oc@4.6 Ghz 1.38V / ASUS Crosshair V Formula / 16GB Kingston HyperX 1600MHZ / ASUS EAH 5870 1GB / Intel 320 Series 120GB / Silverstone Tj07 - Black / Corsair TX750v2 / Windows 8 Pro x64
    Apogee HD/Heatkiller GPU-X?/MPC655/360 Radiator

  14. #39
    Xtreme Enthusiast
    Join Date
    Jan 2008
    Location
    Athens -> Hellas
    Posts
    944
    Lafas, try highflow.nl and aquatuning.de for the block,or even direct from EK Webshop.... postage cost for greece is lower....or you can find one at plaisio stockhouse...

  15. #40
    Xtreme Cruncher
    Join Date
    Jan 2007
    Location
    VA, USA
    Posts
    932
    Most of your problems come from the old block.
    You'll be happy with the Swiftech XT


    ^^^^
    Click me

  16. #41
    Xtreme Mentor
    Join Date
    Feb 2009
    Location
    Bangkok,Thailand (DamHot)
    Posts
    2,693
    i will test my VCore sucking Q6600 to compare with you
    Intel Core i5 6600K + ASRock Z170 OC Formula + Galax HOF 4000 (8GBx2) + Antec 1200W OC Version
    EK SupremeHF + BlackIce GTX360 + Swiftech 655 + XSPC ResTop
    Macbook Pro 15" Late 2011 (i7 2760QM + HD 6770M)
    Samsung Galaxy Note 10.1 (2014) , Huawei Nexus 6P
    [history system]80286 80386 80486 Cyrix K5 Pentium133 Pentium II Duron1G Athlon1G E2180 E3300 E5300 E7200 E8200 E8400 E8500 E8600 Q9550 QX6800 X3-720BE i7-920 i3-530 i5-750 Semp140@x2 955BE X4-B55 Q6600 i5-2500K i7-2600K X4-B60 X6-1055T FX-8120 i7-4790K

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •