Gigabyte X58A-UD3R/Extreme Discussion Thread

[the_real_7]

+1 radaja, Lots of good people here at XS willing to help. Without the help of you guys I would still be trying to get 4ghz stable on my q9550 and P5K Deluxe .

radaja: Im running 19x230bclk blend as I type on the Classified and the 930 but without HT, trying it at cas7 to make my no HT not look so bad lol.

EDIT: and at 20min it locks up again

Got help with my q6600 lol damn 3.6 was so tight back then lol lol lol

[radaja]

thats some nice words radaja so did you solve your issues ? as you can see theres always something to fix

lets Bold my friend OC Nub he deserves it big time !

well its the least i could say with all the help you gave me on the ud3p,when i first got my Q9650
and yes your right i should have bolded his name,so i will make up for it now-thanks,OC Nub
as to my issues i did get 230 stable,but still havent gotten ddr3-2000/4000 to run?but once i got 230 stable i just stopped.needed a break or i would have went insane

+1 radaja, Lots of good people here at XS willing to help. Without the help of you guys I would still be trying to get 4ghz stable on my q9550 and P5K Deluxe .

radaja: Im running 19x230bclk blend as I type on the Classified and the 930 but without HT, trying it at cas7 to make my no HT not look so bad lol.

EDIT: and at 20min it locks up again

oh man i was hoping it would work.thats exactly what mine kept doing it would just freeze/lockup.i know its something simple
i just dont know what?maybe cpu/vtt pwm frequency?or the less thing?
or maybe ioh/ich i/o voltage?i know mine wont boot with 1.50,needs at least 1.60 to 1.70v?
but im sure you will solve this soon
how much vcore are you running for 4377 using the x19?and have you tried 15x231?

[OC Nub]

real 7, i never tried the q6600 but found an old external hard drive i had saved my screens on. was funny to go back and look at some of them.



Uploaded with ImageShack.us

radaja, will try again this weekend hopefully with the new xeon. have tried vcore from 1.388 load to 1.43 load on this 930 with no ht, which passed 4620mhz 25 passses linx no ht on 1.424v. weird thing is it failed faster the last time after raising vcore. ill figure it out eventually.

Thanks for the kind words guys. if you only knew how little i really know about this you would take the 'bold" away from my name lol. still spend most of the time scratching my head thinking WTF why wont this work?

[radaja]

radaja, will try again this weekend hopefully with the new xeon

fresh start(with the xeon) might be the perfect thing to try
i wish you good luck

[OC Nub]

fresh start(with the xeon) might be the perfect thing to try
i wish you good luck

I hope so also, Thanks.

[the_real_7]

real 7, i never tried the q6600 but found an old external hard drive i had saved my screens on. was funny to go back and look at some of them.

Thats a classic you even have one core failed lol . . .
Here's another with my q6600 lol



Tried to lower voltage from 1.68 on my to 1.66 got bsod . . . are these sticks designed to handle voltage like this

[andressergio]

back to the roots, the good all prime, been lazy but 4 hours its nice at 25C Room temp and 28C outside summer around here, no AC, i went out home and close all room doors LOL when i came it was hell inside rad is taking out heat fast lol





Uploaded with ImageShack.us

[Dahaka]

Buen procesador sergio , en que foros participas en latino america?.

Good cpu my Sergio, do you have a custom WC?, can you ran some 3DMark to see your cpu score with that config please?.

Regards.

[andressergio]

Buen procesador sergio , en que foros participas en latino america?.

Good cpu my Sergio, do you have a custom WC?, can you ran some 3DMark to see your cpu score with that config please?.

Regards.

thanks bud its a cool chip like volts OC very good but runs very cool as you can see

Congrats on your team they win and they deserve dunno what happened to us lol

yes i did this some pages ago you can see

its same speed of blend no HT



and this is my rig lol as radaja said look like a vertical torture rack buts a haf922



Uploaded with ImageShack.us

cheers TOOL

[l0ud_sil3nc3]

very nice sergio

[andressergio]

very nice sergio

thanks George grats on your 12Gb o 2000C7 any improvement on that mem over the 2200 C8 ?

cheers
Sergio

[OC Nub]

Very good job Sergio .

[l0ud_sil3nc3]

thanks George grats on your 12Gb o 2000C7 any improvement on that mem over the 2200 C8 ?

cheers
Sergio

I wish I had 2200 c8 sticks, but my Corsair Dominators are rated at DDR3 2000 c8 and if these supertalents overclock better I am going to snag another 12GB's and get rid of my Dominators.

[andressergio]

finally i did it




cheers all
Sergio

[andressergio]

can anyone show me the volts measure points on the GIGA X58A UD3R

i found this

http://lh4.ggpht.com/_CJpbLrog_T0/TJ...ge%5B30%5D.png

but readings are weird

thanks all !
Sergio

[DomagojX]

http://valid.canardpc.com/show_oc.php?id=1503489

[]siNNer[]

DomagojX nice speed! More info please, cooling, qpi/vtt for that bclk

[andressergio]

some linx at my 24/7 this time on CL6



edited to show real vdimm

cheers all
Sergio

[OC Nub]

Great job Sergio.

[radaja]

some linx at my 24/7 this time on CL6

cheers all
Sergio

very nice sergio
looks like you got a sweet set of ST's,1.68v load for 1720 6-6-6-19-72 is awesome

[Dahaka]

Great cas Sergio .

Few days back i test my 950 on UD3R, and i get in less than one hour 4320MHz for 3dmark runs with 1.32v and HT on. I'm waiting to the next month to bough one of this MB.

Regards and keep pushing.

PD: can you try it with HT on?

[andressergio]

very nice sergio
looks like you got a sweet set of ST's,1.68v load for 1720 6-6-6-19-72 is awesome

thanks radaja you know what is funny ? it that i bought my first 2x2 form Sbliiz for my P45 remember ? and when i moved to X58 i spend lots of days to get the same black pcb wich where out of stock, and so i bought single stick from ebay to realize that where order from Sbliiz lol ! and it ended up being same batch as my 2x2 lol i was really lucky

thanks !
Sergio

[andressergio]

Great cas Sergio .

Few days back i test my 950 on UD3R, and i get in less than one hour 4320MHz for 3dmark runs with 1.32v and HT on. I'm waiting to the next month to bough one of this MB.

Regards and keep pushing.

PD: can you try it with HT on?

sup mate ! yes i can do on HT no problems but HT puts down some breaks at this speed some benches are lower more heat, so no HT is perfect, and i think its not only my opinion

i was playing the other day at this same C6 with 4515 HT ON

thanks and good luck !
Sergio

[andressergio]

Guys

edited 04/12/2010

i read VTT / VDIMM and VCORE on the measure points of the mobo

1,36VTT set on bios = 1,337 idle / load 1,36 REAL

1,40VTT set on bios = 1,360 idle / 1,388 loaded REAL

1,42VTT set on bios = 1,402 loaded REAL


1,7VDIMM set on bios = 1,68 idle / load 1,7 REAL

1,5 set on bios (LLC1) = 1,472 IDLE read by ET6 or AIDA64 = 1,482 real same on bios


Cheers !
Sergio

[Donster]

Hello guys

Im not new to system building but AM new to the whole OC thing, I was wondering if someone could reccomend some OC settings for my current rig? ( see sig) I was thinking maybe 4ghz?

any help or guidance appreciated

cheers