XS HWBot Team

[trans am]

so what happens if you get ln2 nice run man.

Im in stage 1 again and almost done with the pcv bench. im on communications 2 test. cross your fingers. brb. i need to get over there and pour some more juice.

***5380

http://hwbot.org/competition/hoc_nov10

http://hwbot.org/community/submission/1079411_

@Linuxfan how did you score that Rampage Extreme x48?!!!
You are holding a piece of 775 history.. its by far one of the best motherboards ever made.
dont kill it please. when you are done with your session unplug everything and take the container off and let it air out. maybe put grease in the socket and dimms just to be safe. take every precaution and treat it with dignity and respect. its worth more than its weight in gold.
its without question the best 775 board you can have!

my ln2 1st stage run ended prematurely due to condensation. the board should be good but I just need to air it out.

all of you in the nov contest on pcmV. There is some brazilian dude in 1st in the 2 core challenge with around 16k.

http://hwbot.org/community/submissio...5k_16390_marks


I was up to 5. ghz on the max3F on 660 and lsi 9260 x 3x 50gb v2 and a 5770 and was getting around 9k. then I found out he had every suite checked. not just the 1st one like weve all been doing. he checked every bench in pcV. maybe this is the secret? Im gonna do a test. Im gonna run the 1st ste on my 4 core rig and then run everything and compare scores. a 20 min bench compared to a 60 min bench. lets see if its worth 60 min of ln2 at once. brb

[SteveRo]

so what happens if you get ln2 nice run man.

Im in stage 1 again and almost done with the pcv bench. im on communications 2 test. cross your fingers. brb. i need to get over there and pour some more juice.

***5380

http://hwbot.org/competition/hoc_nov10

http://hwbot.org/community/submission/1079411_

@Linuxfan how did you score that Rampage Extreme x48?!!!
You are holding a piece of 775 history.. its by far one of the best motherboards ever made.
dont kill it please. when you are done with your session unplug everything and take the container off and let it air out. maybe put grease in the socket and dimms just to be safe. take every precaution and treat it with dignity and respect. its worth more than its weight in gold.
its without question the best 775 board you can have!

my ln2 1st stage run ended prematurely due to condensation. the board should be good but I just need to air it out.

all of you in the nov contest on pcmV. There is some brazilian dude in 1st in the 2 core challenge with around 16k.

http://hwbot.org/community/submissio...5k_16390_marks


I was up to 5. ghz on the max3F on 660 and lsi 9260 x 3x 50gb v2 and a 5770 and was getting around 9k. then I found out he had every suite checked. not just the 1st one like weve all been doing. he checked every bench in pcV. maybe this is the secret? Im gonna do a test. Im gonna run the 1st ste on my 4 core rig and then run everything and compare scores. a 20 min bench compared to a 60 min bench. lets see if its worth 60 min of ln2 at once. brb

Much congrats and well done on your new World Record.
Lots of hard work on your part so well earned and well deserved!

Not to worry about the 2nd stage (yet).

[Linuxfan]

Had fun with a little gigabyte motherboard the X58-USB3, it works pretty well.
Only points I got from the W3570 were from Pifast though.
Qualified for the Gig Core comp.

[SteveRo]

Had fun with a little gigabyte motherboard the X58-USB3, it works pretty well.
Only points I got from the W3570 were from Pifast though.
Qualified for the Gig Core comp.

congrats!!

[Don_Dan]

Yeah! Don your're a good capt. you've been doing a great job keeping the team motivated.

Thanks!

Had fun with a little gigabyte motherboard the X58-USB3, it works pretty well.
Only points I got from the W3570 were from Pifast though.
Qualified for the Gig Core comp.

Nice work Daniel, did you see you made News at HWBot yet? Congrats!

Our member mk-ultra has tested a GTX 580 on water and made a nice single card score!

Here's an overview over today's scores:



Yotomeczek found a nice Sempron 145 and attacks the single core Wprime category.
Linuxfan is pushing his W3570 for the Gigabyte Core Prime contest.

[Linuxfan]

Thanks!



Nice work Daniel, did you see you made News at HWBot yet? Congrats!

Our member mk-ultra has tested a GTX 580 on water and made a nice single card score!

Here's an overview over today's scores:



Yotomeczek found a nice Sempron 145 and attacks the single core Wprime category.
Linuxfan is pushing his W3570 for the Gigabyte Core Prime contest.

Nice work Yoto and MK!
Very cool, first time I've been on the front page.

[trans am]

Much congrats and well done on your new World Record.
Lots of hard work on your part so well earned and well deserved!

Not to worry about the 2nd stage (yet).

steve, thanks buddy. I am having a hard time getting 145 A. past 320 htt. its a pain. it seems as soon as I get her ready the dimms ice up and I need to end the bench session. so while I was waiting for the hairdryer I plugged the raid card into my sabertooth to see what that same raid set would do on x16/x8 on x58 but at 4 ghz I was only hitting 9k. I think I ran into the same problem you had with the raid card not working in this bench like you would expect. So it made me wonder. Maybe the card was also crap on the 890 chipset. To make a long story short, I took off the raid card and set up a raid 0 set with 3x vertex2 on the 890 onboard and im gonna bench again. lets see what happens. everyone else that submitted recently. congrats. I feel like were are weeding through the crap and getting serious again. lets keep ripping!

[Computurd]

can anyone else see the verification URL of the team in the lead of the dual core PCMV ? its I2I3 that submitted it, but i cant get the url to work for some reason. bout to get this fired up in here, for some PCMV smackdown

excellent work TA, i see ya been busy brother! keep up the good work

[trans am]

lemme try to search user database in FM and see if I can find a back door otherwise put your leather gloves on and I'll meet you with my baseball bat and hope I2I3 shows up.

[trans am]

yeah. when I search his name "I2I3" a ton come up under 3d but when I search FM with his name under pcmark regardless of custom or default I get nothing. I get around 9k on 2 core at 4ghz with the lsi and 3x vertex2 in raid 0. I thought the url was mandatory? some of the submissions when I confronted them they said they didnt have internet connection at the time they did the benches and saved the pcm file. but you would think they would save it on a key and submit on a different rig when they had the time like everyone else does. but days later there is no url. so yeah dudes in question. It makes you look kinda sketchy.

If everyone posts their raid rig it might be a good thing. also why is there no pcmark vantage category when I select 2d? I only see pcmark05 category on the bot. why no pcvant category but we have a pcmark vantage contest? How can I see all the pcV submissions without going through FM rats nest? anyone?

***********ooops duh I see it on the far left category. it doesnt come up when you search a specific processor. You need to scroll down and select it by its own benchmark. I got it.

PAUL CHECK YOUR PM. i HAVE A QUESTION ONLY YOU WOULD KNOW.

[Computurd]

well i did a 25K with four core on my desktop. literally NO optimizations, anything. should be enough to up the ante a bit. firing a shot across some bows here. i will bring out the battleship (top secret setup) on wed, possibly Thursday. ambients @ 28F those days. kinda warm today, just wanted to put something a little bigger up to mess around. i am not very familiar with screenie submissions, please critique and lemme know if its right guys. just ran this after checking my email, so literally on 24/7 setup, but hey, its all fun (for now)

@TA-no need for baseball bats, if i know uncle steve, you aint seen nothing yet .

@TA--answered your PM

[SteveRo]

well i did a 25K with four core on my desktop. literally NO optimizations, anything. should be enough to up the ante a bit. firing a shot across some bows here. i will bring out the battleship (top secret setup) on wed, possibly Thursday. ambients @ 28F those days. kinda warm today, just wanted to put something a little bigger up to mess around. i am not very familiar with screenie submissions, please critique and lemme know if its right guys. just ran this after checking my email, so literally on 24/7 setup, but hey, its all fun (for now)

@TA-no need for baseball bats, if i know uncle steve, you aint seen nothing yet .

@TA--answered your PM

I was waiting to post my next 2x core score till next weekend, you and Trans am have PM.

[SteveRo]

@ Mr CT - nice start - I know you will have a huge backup waiting soon.

[Don_Dan]

@trans-am: FM validation links are not mandatory in this competition.

well i did a 25K with four core on my desktop. literally NO optimizations, anything. should be enough to up the ante a bit. firing a shot across some bows here. i will bring out the battleship (top secret setup) on wed, possibly Thursday. ambients @ 28F those days. kinda warm today, just wanted to put something a little bigger up to mess around. i am not very familiar with screenie submissions, please critique and lemme know if its right guys. just ran this after checking my email, so literally on 24/7 setup, but hey, its all fun (for now)

Thanks for posting your score!

Unfortunately, Ocool reported it because the memory tab was missing so I deleted it. Just to let you know what happened to your submission.

I'm looking forward to seeing your top secret benching setup!

[G.Foyle]

Good job with PCM Vantage everyone
Made some easy hardware points with a 4870 today. I'll have to re-bench all the old GeForces 9x00 and Radeons 4xx0 when we find a good CPU...

[SteveRo]

Good afternoon guys, I have a 8800 GTX on the the way, is there an oc tutorial you would recommend, I haven't used rivatuner and atitool in an age and an age ...

[Don_Dan]

Good afternoon guys, I have a 8800 GTX on the the way, is there an oc tutorial you would recommend, I haven't used rivatuner and atitool in an age and an age ...

Rivatuner is pretty straight-forward in my opinion, all you need is System settings under Driver settings on the main tab. In case you need more clock speed than Rivatuner will give you with standard settings go to the Power user tab, Rivatuner\Overclocking\Global and adjust MaxClockLimit.

[SteveRo]

Rivatuner is pretty straight-forward in my opinion, all you need is System settings under Driver settings on the main tab. In case you need more clock speed than Rivatuner will give you with standard settings go to the Power user tab, Rivatuner\Overclocking\Global and adjust MaxClockLimit.

stability test with atitool or ???

[mk-ultra]

for benching?
vantage does the trick

btw guys i got a REX coming up, couldn't pass this deal for 100 bucks
i have a few 775 cpu laying here and might as well post some score with them.

i benched my 580 yesterday and 985 is the max it will do on water, sux
my 06 score won't calculate for some reasons idk

still need to do some preparation before dice plus i'll have more time soon because work is getting more relax at this time of year

foyle, good work with the 4870

[Don_Dan]

stability test with atitool or ???

Either use Vantage or 3Dmark 03, in general test with the benchmarks you'll be running, don't waste your time with atitool or even Furmark.

btw guys i got a REX coming up, couldn't pass this deal for 100 bucks
i have a few 775 cpu laying here and might as well post some score with them.

i benched my 580 yesterday and 985 is the max it will do on water, sux
my 06 score won't calculate for some reasons idk

Awesome, you joined the REX club! Looking forward to seeing your results!

By the way, I fixed your 06 score!


Two pictures for G.Foyle and mk-ultra:





Nice work, we're close to reaching 17k points!


Quick competition info: In the Asus 1156 competition FUGGER is currently ranked 2nd, still 4 hours to go. Last week of the competition too.

[SteveRo]

Nice work and congrats to Mr's Foyle and mk-ultra!

[Don_Dan]

Please welcome our new member Buckeye!

[Buckeye]

Please welcome our new member Buckeye!

HAHA Thanks

[Linuxfan]

Please welcome our new member Buckeye!

Welcome!
Awesome to have you aboard!

[Buckeye]

Welcome!
Awesome to have you aboard!

Thanks

Now if I could get the bot to update correctly, it seems to be getting hammered today.