cinebench 11.5

[FlanK3r]

how much i need for 7.8 ? ,-) ....

[Tomasis]

I wonder what is highest speed for Deneb for air cooling in charts?

[ReKcOlNu]

how much i need for 7.8 ? ,-) ....

More MHz/H20?

12 crazydiamond  /176    7.89   -      1090T X6    4402
13 Barr3l Rid3r /246     7.85   H20    1090T X6    4410
14 Daveburt714 /213      7.82   H20    1055T X6    4368

CineBench Score Charts

[FlanK3r]

no, i want try this year with air , 4368 MHz is no way from my last run ...

[Panther_Seraphi]

Ill give an old 4200+ a spin tonite on cinebench and see what it can do in comparison to the new architectures

[FlawleZ]

Ill give an old 4200+ a spin tonite on cinebench and see what it can do in comparison to the new architectures

I'll beat you to the punch. And here's a near cream of the crop K8 at that. I think I can do 3.5Ghz on his 6400+ I just have it at 3.4Ghz 24/7. This Zalman 9500 isn't the best for air on this thing.

This is XP 32 Bit. Maybe a bit better score with x64 is possible.

[Panther_Seraphi]

Well here is my try again with a 4200+

Need better cooling though as it hit 53 degrees on this run :S

[FlawleZ]

Well here is my try again with a 4200+

Need better cooling though as it hit 53 degrees on this run :S

I think mine hit 60C. This 6400+ runs quite hot. I think 1.6-1.7+ may be achievable with a clean install and under 64 bit. I may try for higher clock speeds tonight, but honestly its just interesting to compare the architecture improvements from K8 to K10.5.

[FlanK3r]

Update me, the same cooling, but a bit higher clocks, must catch up DavesBurt CPU ,-)

[chinook]

Thought i'd play with the cold air a bit, tonight
Ambient temperature 10C. Cpu voltage is 1.56 in idle and 1.584 load.

[FlanK3r]

this is with aircooling?!

[chinook]

Aircooling? Nooo, it's with H2O, Flanker
I opened the balcony to cool the air inside the room to ~10C, that's what i meant in the previous post

[ReKcOlNu]

Thought i'd play with the cold air a bit, tonight
Ambient temperature 10C. Cpu voltage is 1.56 in idle and 1.584 load.

Nice jump from your previous 7.71 score, this moves you up about 10 places in the chart too.

@FlanK3r - finally updated you as well.

[I.nfraR.ed]

I'm now really sure that this is not a ordinary Deneb, it's superior one.

Impossible for my old Deneb on water, even with cold air help!


This is a result from 2 minutes (literally) of tweaking. The ambient temp is 20C. It took me more time to write the post and upload the screenshot.
I'm too sleepy now to aim for the maximum, but I will do it some other day.

[FlawleZ]

I'm now really sure that this is not a ordinary Deneb, it's superior one.

Impossible for my old Deneb on water, even with cold air help!


This is a result from 2 minutes (literally) of tweaking. The ambient temp is 20C. It took me more time to write the post and upload the screenshot.
I'm too sleepy now to aim for the maximum, but I will do it some other day.

That's awesome!

*looks shamefully at the Deneb setup here that isn't 4Ghz stable*

[rouge]

This is my 24/7 overclock, 3.6GHz is the sweat spot, after that the speed to voltage ratio drops off a cliff.

[crazydiamond]

I'm now really sure that this is not a ordinary Deneb, it's superior one.

Impossible for my old Deneb on water, even with cold air help!


This is a result from 2 minutes (literally) of tweaking. The ambient temp is 20C. It took me more time to write the post and upload the screenshot.
I'm too sleepy now to aim for the maximum, but I will do it some other day.

hmm is that another one of the new 3 letter stepping denebs?!

[I.nfraR.ed]

Yes, 1046MPM. My 955 1001APMW is kind of a pointless now.

[justapost]

Here's my 435 :-)

[crazydiamond]

Yes, 1046MPM. My 955 1001APMW is kind of a pointless now.

lol those new denebs are unbelievable! im interested in stability, let me know when you test some prime or the likes. maybe 4300mhz+ stable? mad222 did 4.5ghz vantage on air, you are doing 4.5ghz cb11, who knows! oh ya and mad did 7.3ghz valid on ln2 with his if you get into that sort of thing

[ReKcOlNu]

Here's my 435 :-)

Cool, the first X3 posted!
You made me add a new color to my graph maker app.

@ I.nfraR.ed: I'm guessing the B55 is water cooled?

Score chart updated again!

[equinox1]

8.52
slight improvement for me

[theoldtimer]

Nice score EQ looks like the chiller is working well.

[FlawleZ]

Here's my 435 :-)

I have my 720 BE I plan to get setup soon I can compare with. In the mean time, a good friend of mine is scoring 3.3 I believe with his 720 BE at 3.6Ghz. You should try to bump your NB speed more you should see good gains if you can get it around 2800-3000Mhz.

[I.nfraR.ed]

lol those new denebs are unbelievable! im interested in stability, let me know when you test some prime or the likes. maybe 4300mhz+ stable? mad222 did 4.5ghz vantage on air, you are doing 4.5ghz cb11, who knows! oh ya and mad did 7.3ghz valid on ln2 with his if you get into that sort of thing

It should do 4.3GHz+
2 hours here, but the first worker gave an error before 3 hours were completed. Anyway it's showing some good potential. The thing is that the 'safe' 24/7 voltage now isn't 1.55, like on old Deneb, but it's 1.48 as for Thuban?
http://www.xtremesystems.org/forums/...postcount=1711
I'm not able to bench with LN2, but maybe some DICE soon.

@ReKcOlNu: Yes, the same water-cooling setup.