Not doubting you Shoggy, but not all 480 wb's is made like yours
I'll make sure to check the contact points on the standard cooler first... then check it on the 480wb.
GPU is a tad higher, maybe too high to use pads on mem/vrm's, if so I give up...
Not doubting you Shoggy, but not all 480 wb's is made like yours
I'll make sure to check the contact points on the standard cooler first... then check it on the 480wb.
GPU is a tad higher, maybe too high to use pads on mem/vrm's, if so I give up...
Looks like a fit to me. The top ram chip on the right should cool just fine, DDR5 runs uber cool anyhow. also if the GPU is a little higher/taller then some themal pads on the mem, and vreg section should fill the gaps.
Sandy Bridge 2500k @ 4.5ghz 1.28v | MSI p67a-gd65 B3 Mobo | Samsung ddr3 8gb |
Swiftech apogee drive II | Coolgate 120| GTX660ti w/heat killer gpu x| Seasonic x650 PSU
QX9650 @ 4ghz | P5K-E/WIFI-AP Mobo | Hyperx ddr2 1066 4gb | EVGA GTX560ti 448 core FTW @ 900mhz | OCZ 700w Modular PSU |
DD MC-TDX CPU block | DD Maze5 GPU block | Black Ice Xtreme II 240 Rad | Laing D5 Pump
Posting Permissions
Reply With Quote
Bookmarks