# To WaterCooling Masters - Urgent Issue #

[X-WoLv-X]

Hello Water fellas...

I am in such a hurry, cause I need to order, THIS Friday, a complete water cooling kit, for delivery next week to NYC, when my parents will be there to receive the order and bring to me here in Brazil.

FrozenCpu will take my order, but they don't have the latest Waterchill kit, so I need to SET ONE UP !

So, I need your help guys, to mount from FrozenCpu, THE BEST cooling kit (CPU and GPU) that I can settle from the items avaible at FrozenCpu !

Got it ?

I have to order IT ALL, so I can get my order and mount a complete water cooling unit !

Could u guys give me a hand ?

Urgent ?!

THANKS HELL A LOT !

WoLv

[X-WoLv-X]

I am thinking about 350 dollars...
Dual RAD and L30 pump....

Thanks again.

CPU: P4c
GPU ATI 9800XT

Cheers

[shafty]

DangerDen TDX 1/2" Copper Water Block - Pentium4
Danger Den MAZE4 GPU - 1/2" ID nVidia/ATI Water Block
i dont know if you want the pelted version or not

Danger Den Black Ice Xtreme II Dual 120mm Radiator (Black) w/ Customizable Fittings

Hydor L30 320GPH Pump
Black mini-CoolShroud 2-4 depending on fans. if you want to do a push or pull setup or just push.

get a reservoir that would work with you case.
get some tubing. get the tygon stuff
get 2-4 120 mm fans. vantec tornados for performance or get some vantec stealths if you want if quite.

and a tube cutter and some different fittings depending on how you are going to run it.

should be between 300 and 350

hope this helps

[X-WoLv-X]

Hummmmm...

This is the best Waterblocks out-there ?

Humm.... peltier:

This is an 80W peltier with bare leads with the suggested use for video card peltier coolers. Using the peltier cooling effect, one side gets very hot as the other side gets freezing cold. Ideally used for water cooling as water cooling can keep the hot side of the the peltier from burning out the entire unit.

I quite don't got it....

SHOULD I get the peltier???

THANK YOU.

[X-WoLv-X]

What do you guys think ?

Am I ready to go with this stuff ?

Should I get better results than the WaterChill KT12A ?

-Black mini-CoolShroud 2x
-DangerDen RBX CPU Block: TDX Intel Socket 478 - 1/2" ID
-DangerDen MAZE4 GPU nVidia/ATI Block: DangerDen MAZE4 GPU - 1/2" ID
-DangerDen Z-Chip Chipset Block: None
-Water Pump: Hydor L30 Pump
-8 Feet of Tubing: Tygon Anti-Kink 1/2" ID Tubing
-Tube Cutter
-1/2" ID Clamps - 10x
-Danger Den Black Ice Radiator: Xtreme II 120mm Dual Fan (Black)
-Radiator Fittings: 2x 1/2" ID - 5/8" OD Fittings
-120mm Radiator Fan: Sunon 120x38mm - 108CFM
-120mm Radiator Fan: Sunon 120x38mm - 108 CFM
-Panaflo Fan Tails: 2x 4pin Molex to Power Supply
-Tundra Bay Resevoir (No Outlet Fittings Included): Blue UV Single 5.25"
- Tundra Bay Resevoir Fittings: 4x 1/2" ID Outlet Fittings

Subtotal: $377.95

[shafty]

you will get better temps with the pelt on the video card and higher clocks. but it will raise you water temps because of more heat. depends if want to really clock it up high or just a little bit.

[X-WoLv-X]

I will certainly clock it...

So, I will add the peltier !

Damn.. plus shipping and tax... !

Thanks a lot Shaf....

[shafty]

no problem about to buy the same kit myself. let me know how it works. what p4 are you running? i dont think the chipset block is worth is i would buy a microchill or swiftech chipset cooler.

[X-WoLv-X]

I am running NOW a p42.6c @ 3.2

But I will have a 3.4c...

I read various reviews and the chipset with or without watercooling remais at the same temp... oscilating by one degree !!!

Does not compensates....

[pauldenton]

Originally posted by X-WoLv-X
What do you guys think ?

Am I ready to go with this stuff ?

Should I get better results than the WaterChill KT12A ?

-Black mini-CoolShroud 2x
-DangerDen RBX CPU Block: TDX Intel Socket 478 - 1/2" ID
-DangerDen MAZE4 GPU nVidia/ATI Block: DangerDen MAZE4 GPU - 1/2" ID
-DangerDen Z-Chip Chipset Block: None
-Water Pump: Hydor L30 Pump
-8 Feet of Tubing: Tygon Anti-Kink 1/2" ID Tubing
-Tube Cutter
-1/2" ID Clamps - 10x
-Danger Den Black Ice Radiator: Xtreme II 120mm Dual Fan (Black)
-Radiator Fittings: 2x 1/2" ID - 5/8" OD Fittings
-120mm Radiator Fan: Sunon 120x38mm - 108CFM
-120mm Radiator Fan: Sunon 120x38mm - 108 CFM
-Panaflo Fan Tails: 2x 4pin Molex to Power Supply
-Tundra Bay Resevoir (No Outlet Fittings Included): Blue UV Single 5.25"
- Tundra Bay Resevoir Fittings: 4x 1/2" ID Outlet Fittings

Subtotal: $377.95

to get the best out of the RBX or TDX you'd also want the nozzle pack @ $3.99

i take it you are on 115V (or nearabouts?) - i've seen all kinds of voltages quotes for brazil...

you'd get better performance from the dangerden 12V pump or mcp600 than the hydor (dd the better of the 2 but not as quiet)

[X-WoLv-X]

I am at 110/115 volts here in Brazil...

So.. are talking about performance or quietness ?

The Hydor performs better....

And the others more quiet ?

Cheers

[pauldenton]

Originally posted by X-WoLv-X
I am at 110/115 volts here in Brazil...

So.. are talking about performance or quietness ?

The Hydor performs better....

And the others more quiet ?

Cheers

you will get more flow with the d4 than the mcp600, which will give more flow than the hydor... (though they are a bit more expensive - $75 for the DD and $79 for the swiftech vs $50 for the hydor...

noisewise dangerden claim their pump is comprable to an L30 (the swiftech is quieter) but the noise has been described as annoying in tone... whether you'd notice it or not depends how loud the other components are and where the pump is... i imagine that those fans at full speed or close to it would easily drown it out...



i think eheims are the way to go for quietness, but they are more $ than the hydor, and they don't sell them at frozenCPU so presumably they're out...

good luck with it - hope you can get it all sorted in time!

[X-WoLv-X]

This is the pumps at FrozenCpu:

http://www.frozencpu.com/cgi-bin/fro...nu_search.html

So... i want PERFORMANCE ant not THAT loud.... hehehehe

[pauldenton]

Originally posted by X-WoLv-X
This is the pumps at FrozenCpu:

http://www.frozencpu.com/cgi-bin/fro...nu_search.html

So... i want PERFORMANCE ant not THAT loud.... hehehehe

i reckon the swiftech is the best bet then... (sadly also the most expensive...)

http://www.frozencpu.com/cgi-bin/fro...ex-pmp-15.html

note that the performance figures there are wrong - the correct ones are here.....
http://www.swiftnets.com/products/mcp600.asp

[Çhrist0ph]

Originally posted by X-WoLv-X


I read various reviews and the chipset with or without watercooling remais at the same temp... oscilating by one degree !!!

Does not compensates....

true, but its gonna kill your flowrate a lot.

[KennyC]

I just got the swiftech pump and I love it.

[Reflex1]

The Z-chip doesn't kill the flow rate much ...i got one and the problem with me is more the fact that it takes up so much room in my case with the extra tubing. Anyways its personal preference to the buyer, i bought it cuz otherwise i'd have a WC loop with only a GPU block

X-WoLv-X ....why do you need to buy a "tube cutter", use some good ol' scissors