UnOfficial EVGA X58 Classified Owners Thread

[zsamz_]

SAE Jacob evga etc listened to me bro

they gave the new settings
ioh skew, tWL, and tREF

awesome...

going back to play with this for the whole week

please share

[cstkl1]

its on evy site

[kup]

kup,thanks. your the man

Dual EPS mod done, I used two of the blue PCIE cables and plugs, taking two 12v and GND from each. Initial tests show absolutely no difference at all. lol I'll try some 4.5GHz LinX later to see if it's stabilised things there at all.

EDIT: It might just be me (and Linx testing later will confirm) but I think the CPU is running cooler now...

[radaja]

Dual EPS mod done, I used two of the blue PCIE cables and plugs, taking two 12v and GND from each. Initial tests show absolutely no difference at all. lol I'll try some 4.5GHz LinX later to see if it's stabilised things there at all.

EDIT: It might just be me (and Linx testing later will confirm) but I think the CPU is running cooler now...

great to hear.i also heard that using two helps with the IMC which helps in better memory stability for extreme memory OCs?
but i might have misunderstood it.but its good to know i can mod it with my existing cables(that came with)my HX850

[OC Nub]

Well radaja.... did you get the board?

[zsamz_]

Well radaja.... did you get the board?

i'm 1000000% he did

he's far too quiet lol

i'll be back on mine as soon
as i get my antec tpq 1200 back from rma
it died while a leaktest no load

[OC Nub]

i'm 1000000% he did

he's far too quiet lol

i'll be back on mine as soon
as i get my antec tpq 1200 back from rma
it died while a leaktest no load

Damn that sucks man.

He is kind of quiet isnt he, must have got it today.

[radaja]

Well radaja.... did you get the board?

i'm 1000000% he did

he's far too quiet lol

i'll be back on mine as soon
as i get my antec tpq 1200 back from rma
it died while a leaktest no load

soon i will be noisy,but for now i have just turned it on

you will be back in business in no time:d
plus you have some other toys to play with,right?

Damn that sucks man.

He is kind of quiet isnt he, must have got it today.

always quiet before the storm

[kup]

Did you do the dual EPS mod for it?

[radaja]

not yet.
i cant seem to get the x21 to work?
in bios it only lets me set 12-20.
im running bios 6/30/10 rev13 but i tried
running 21x215 and it just wont do it?

[OC Nub]

radaja, if I enable turbo it still shows 21x multi on this 930 in bios but in windows it shows the 22x multi.

Managed to get 2300mhz mem but looks like it drops a channel unless I raise the timings.



Uploaded with ImageShack.us

[radaja]

ok,i was looking at your bios SS's and thought i should be able to do 21 too
but i dont own a 930 do i?no i dont my first classy fart

[OC Nub]

ok,i was looking at your bios SS's and thought i should be able to do 21 too
but i dont own a 930 do i?no i dont my first classy fart

It is running at 21x in windows?

[radaja]

you know i never checked,i just kept rebooting into the bios to see if any of my
changes i tried had worked and then when i finally booted into windows it failed
so loaded defaults and then posted here on how to fix it
man these voltages are whacky,it loads my vtt at stock as 1.24v so +100 gives
1.36v but load it jumps to 1.39v.

[OC Nub]

you test with dmm? e leet reads very high but with a dmm vtt was much lower.

Just started linx, e-leet reads vtt at 1.37v and dmm reads 1.28v. have it set to +75mv in bios

[zsamz_]

soon i will be noisy,but for now i have just turned it on

you will be back in business in no time:d
plus you have some other toys to play with,right?

i fired up my ut p35 n slaped in the 4870x2 n testin


OMG! OcNub gonna hit 30k in everest copy
how much juice you pumpin in there lol

[radaja]

you test with dmm? e leet reads very high but with a dmm vtt was much lower.

Just started linx, e-leet reads vtt at 1.37v and dmm reads 1.28v. have it set to +75mv in bios

i havent tried a DMM yet but i will soon.what kind of temps are you getting on vreg and NB and MB sensors?
i got the AC blowing in hard and still at 27c vreg/39c Nb/17c MB? i cant figure out how to get NB and vreg
temps down like the MB sensor.i have three 40mm fans blowing directly down ove socket and another on NB

i fired up my ut p35 n slaped in the 4870x2 n testin

nice the P35-UT-T2R stomps my EP45-UD3P.but soon i will rectify this

[OC Nub]

took 1.71v dram and 1.60vtt. stopped after that, dont want to kill anything.

vreg is 29c, this software doesnt show nb on this c3 yet, only place to check is in bios, which doesnt do a lot of good. with your cooling im sure everything is fine.

aida64 and everest read board as unknown still.



Uploaded with ImageShack.us

[radaja]

well im off to bed,but i did manage to get the hang
of this new MB and will play all day tomorrow with it.

[DomagojX]

wow...great CPU!!!

[cstkl1]

well im off to bed,but i did manage to get the hang
of this new MB and will play all day tomorrow with it.

use mch strap 1333 and u will get better timings

the new bios
hmm seems a lot of ppl dont know how to use it

with the tWL and tRL ( it was incomplete without the tWL)
and the tREF

u can use any other manufactorer ram timings
example like r3e bclk 200 C8 2:10 timings



r3e timings are much more mem timings tighter but
less strained for ure Uncore especially on C7 and C6 on 2:10

[OC Nub]

^^ Thanks, strap makes a big difference in sub timings and in aida64 bench, I was using 1600 to try and keep it stable. Trying 1066 strap, required 1.67vDimm.



Uploaded with ImageShack.us

just raising uncore seems to give me the best boost even with 1600 strap.



Uploaded with ImageShack.us

[CryptiK]

Wow Nub, 4.5GHz Uncore on a 930 on water....do I even want to know how much Vtt you are feeding that poor thing?

[nacho_arroyo]

Iam testing the new bios 77 with my 980x on SS and works great

http://img146.imageshack.us/img146/2201/screen030q.jpg

http://img713.imageshack.us/img713/3637/screen029r.jpg

[CryptiK]

Nice one, 5-6-5-X at 798 MHz. Good to see CL5 working, could never even get that to boot on my R2E.