Page 14 of 14 FirstFirst ... 411121314
Results 326 to 343 of 343

Thread: **Official** GIGABYTE 333 Onboard Acceleration P55A Series - P55A-UD6/UD4P/UD3

  1. #326
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    144
    hey guys I got an issue.. I cant get my p55-ud6 rev 1.0 and my 875k to stress test with HT on no matter what I do. Ive tryed f6-f8-f10-f11c bios and everything seems the same. here my current settings.

    cpu : 4ghz
    multi:x22
    vcore: 1.2875
    qpi-vtt: 1.26
    bclk: 186
    dram: 1.72
    pch: 1.18
    PLL: 1.82
    pci-e: 101

    memory performance is set to "standard" mode

    Memory: Kingston HyperX khx1600c9d3k3

    2232mhz version 4.10 memtested went 10 full tests 8 times over no problem, so I dont think its the ram at all.

    7-12-8-28-88-1t


    all acc settings are diabled except HT the misc section everything is disabled. It seems like alot of folks in here are using the p55A-ud6??? is the p55-ud6 is kind of a lemon for overclocking an i7??? thats image im getting since ive tryed every trick I know and Still cant get this think stable with ht on. with HT off in opinion it need way to much voltage to become stable with only 4 cores kinda disappointing.

    any help you be great
    i5 3570k 4.2ghz 1.28v H100 cooled stable 24/7 | Asus Sabertooth Z77 TUF | 2x4GB 8GB Mushkin Blackline 998954 | GTX 680 2gb | 120GB OCZ Vertex 3/3TB Seagate | Enermax Platimax 850w | NZXT Switch 810 White | Windows 7 Ultimate | Samsung 40" LCD HDTV
    A+ NET+ Linux+ MCP MCTS MCSA MCITP
    World of Tanks WGLNA
    CSGO ESEA
    Heatware: MarcusFoX

  2. #327
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Italy
    Posts
    238
    llc ?

    more i7 lynnfield can run @4ghz with 1.3+v

    now you have an 875k, this is good normaly i know that him can run @ 4ghz with 1.26-1.27v but with low bclk, i don't know if @ 186 it's possible...

    however try

    vcore 1.32v (under llc2)
    vtt 1.30v
    pch 1.05 (this is not critical for overclock)
    pll 1.80-1.82v


    for example, my i7 860 with my p55a ud6 can run stable @ 4ghz, 192mhz of bclk ram 10x with 1.328v (under llc 2) and vtt 1.30v, vpll 1.80

    @ 186mhz of bclk i need only 1.26v but not all i7 are same

    ps do u have p55.ud6 or p55a ud6?
    i7 4770k @ 4.4GHz | MSI MPower | 8gb Geil Evo Corsa 2133 | Gigabyte GTX670 wf3 | Samsung 830 256gb | 3xWd Re3 raid5 | Antec HCG 620w

    Θ Core i7 4770k 4.4ghz 1.3v :'( Θ Core i7 2600k 4.5ghz 1.344v Θ E8400 500x8 4ghz 1.36v Θ Core i7 860 @ 4ghz 1.328v Θ Turion M500 2.2ghz 1.025v Θ Phenom II 955 c3 3.91ghz 1.52v Θ Phenom II 545 3.77ghz 1.47v Θ
    _~{ ALL RS }~_

  3. #328
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    144
    Quote Originally Posted by devil_mcry View Post
    llc ?

    more i7 lynnfield can run @4ghz with 1.3+v

    now you have an 875k, this is good normaly i know that him can run @ 4ghz with 1.26-1.27v but with low bclk, i don't know if @ 186 it's possible...

    however try

    vcore 1.32v (under llc2)
    vtt 1.30v
    pch 1.05 (this is not critical for overclock)
    pll 1.80-1.82v


    for example, my i7 860 with my p55a ud6 can run stable @ 4ghz, 192mhz of bclk ram 10x with 1.328v (under llc 2) and vtt 1.30v, vpll 1.80

    @ 186mhz of bclk i need only 1.26v but not all i7 are same

    ps do u have p55.ud6 or p55a ud6?

    Hey Devil its a P55-UD6 rev 1.0 I did some further test this morning and my chips seemed to be more stable at a vtt of 1.18v and lower. I actually got it too LINX stress with a 17k problem at 4ghz at 1.18v vtt, but as soon as I took the voltage near 1.3v vtt it would crash. Its kinda of a wierd issue but I think the chip is just sensitive too vtt.

    just too add this in I can stress the cpu at 1.16 vcore at 3.7ghz at 1.18 vtt passes test no problem

    vcore 1.32v (under llc2)
    vtt 1.30v
    pch 1.05 (this is not critical for overclock)
    pll 1.80-1.82v

    and these setting are exactly what I tryed at first like .... when I read your post it was like you read my mind hehe =) sep my vtt was 1.28v I think and my PCH was alittle higher at 1.1 but I dont think that matter's much.

    what is the stepping on your guys 860's/870's?? its B1 on the 875k.
    i5 3570k 4.2ghz 1.28v H100 cooled stable 24/7 | Asus Sabertooth Z77 TUF | 2x4GB 8GB Mushkin Blackline 998954 | GTX 680 2gb | 120GB OCZ Vertex 3/3TB Seagate | Enermax Platimax 850w | NZXT Switch 810 White | Windows 7 Ultimate | Samsung 40" LCD HDTV
    A+ NET+ Linux+ MCP MCTS MCSA MCITP
    World of Tanks WGLNA
    CSGO ESEA
    Heatware: MarcusFoX

  4. #329
    Xtreme Member
    Join Date
    Nov 2008
    Location
    London
    Posts
    300
    Yep stepping is B1.

    Just set VTT to sweetspot of whatever bclk u run. So it looks like for that bclk u only need 1.18vtt, keep it as that. But to be honest i found keeping vtt closer to vcore helps stability. So if ur using 1.32vcore, then set a bclk/cpu multi combination in which it will NEED around 1.30vtt and 1.32vcore. But hey, it might not be the same on ur chip, or even the 875k altogether.
    -
    Core i7 860 @ 3.80GHz, 1.28v | GA-P55A-UD4 | G.Skill Ripjaw 4GB DDR3 @ 1900MHz 7-9-8-24 1N, 1.57v | HIS HD 6950 2GB, 1536sp @ 900/1400, 1.10v | Samsung F3 500GB | Thermaltake 750W | Windows 7 64bit | Air

    Crunching away...

  5. #330
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    144
    Quote Originally Posted by Oztopher View Post
    Yep stepping is B1.

    Just set VTT to sweetspot of whatever bclk u run. So it looks like for that bclk u only need 1.18vtt, keep it as that. But to be honest i found keeping vtt closer to vcore helps stability. So if ur using 1.32vcore, then set a bclk/cpu multi combination in which it will NEED around 1.30vtt and 1.32vcore. But hey, it might not be the same on ur chip, or even the 875k altogether.
    I know what you guys are saying is defently right.... im switching away from the f11c bios again see what happens
    i5 3570k 4.2ghz 1.28v H100 cooled stable 24/7 | Asus Sabertooth Z77 TUF | 2x4GB 8GB Mushkin Blackline 998954 | GTX 680 2gb | 120GB OCZ Vertex 3/3TB Seagate | Enermax Platimax 850w | NZXT Switch 810 White | Windows 7 Ultimate | Samsung 40" LCD HDTV
    A+ NET+ Linux+ MCP MCTS MCSA MCITP
    World of Tanks WGLNA
    CSGO ESEA
    Heatware: MarcusFoX

  6. #331
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    144
    didnt make a different... still the same problems... cant get past 4ghz under linux with HT on. try f8 how...
    i5 3570k 4.2ghz 1.28v H100 cooled stable 24/7 | Asus Sabertooth Z77 TUF | 2x4GB 8GB Mushkin Blackline 998954 | GTX 680 2gb | 120GB OCZ Vertex 3/3TB Seagate | Enermax Platimax 850w | NZXT Switch 810 White | Windows 7 Ultimate | Samsung 40" LCD HDTV
    A+ NET+ Linux+ MCP MCTS MCSA MCITP
    World of Tanks WGLNA
    CSGO ESEA
    Heatware: MarcusFoX

  7. #332
    Xtreme Member
    Join Date
    Nov 2008
    Location
    London
    Posts
    300
    What voltage do u need for 4GHz with HT off?
    -
    Core i7 860 @ 3.80GHz, 1.28v | GA-P55A-UD4 | G.Skill Ripjaw 4GB DDR3 @ 1900MHz 7-9-8-24 1N, 1.57v | HIS HD 6950 2GB, 1536sp @ 900/1400, 1.10v | Samsung F3 500GB | Thermaltake 750W | Windows 7 64bit | Air

    Crunching away...

  8. #333
    Xtreme Member
    Join Date
    Feb 2008
    Posts
    144
    too gets things stable around 1.32v without HT the funny thing is that I would have too add more voltage once I add alittle VTT or Xcore it just locks up. with the x58 and a i7 920 D0 I no prblem doing 4.4ghz ht on at 1.3875v... in my opinion that isnt right my i7 920 would do 4ghz at less than 1.15v.

    I tryed f8 last night no change I think the boards just a lemon... I got a MIIIE comming ill try this overclock with it and see if the resault are the same... my bet is either this board doesnt like the ram I have since it isnt on the QVL or the board just a lemon but its odd I was able to run 2232 stable thats pritty good for not being on the QVL... I can see it being the chip Its a hand picked batch this chip should really clock.

    im at 3.718 atm 1.15v 1.18vtt running perfectly stable 186bclk 2232mem... its got me stumped.

    details on my psu its a corsair HX 850
    i5 3570k 4.2ghz 1.28v H100 cooled stable 24/7 | Asus Sabertooth Z77 TUF | 2x4GB 8GB Mushkin Blackline 998954 | GTX 680 2gb | 120GB OCZ Vertex 3/3TB Seagate | Enermax Platimax 850w | NZXT Switch 810 White | Windows 7 Ultimate | Samsung 40" LCD HDTV
    A+ NET+ Linux+ MCP MCTS MCSA MCITP
    World of Tanks WGLNA
    CSGO ESEA
    Heatware: MarcusFoX

  9. #334
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Italy
    Posts
    238
    Quote Originally Posted by MarcusFoX View Post
    too gets things stable around 1.32v without HT the funny thing is that I would have too add more voltage once I add alittle VTT or Xcore it just locks up. with the x58 and a i7 920 D0 I no prblem doing 4.4ghz ht on at 1.3875v... in my opinion that isnt right my i7 920 would do 4ghz at less than 1.15v.

    I tryed f8 last night no change I think the boards just a lemon... I got a MIIIE comming ill try this overclock with it and see if the resault are the same... my bet is either this board doesnt like the ram I have since it isnt on the QVL or the board just a lemon but its odd I was able to run 2232 stable thats pritty good for not being on the QVL... I can see it being the chip Its a hand picked batch this chip should really clock.

    im at 3.718 atm 1.15v 1.18vtt running perfectly stable 186bclk 2232mem... its got me stumped.

    details on my psu its a corsair HX 850
    with HT?

    your 875k is the second 875 very unlucky that i see, other 875, as you, want 1.38v to run @ 4ghz ht on

    but your vtt is very good :P

    yesterday i play with settings, i found a good setup for 24/7

    i7 860 3906mhz 21x186mhz @ 1.264v (under llc, 1.248v in idle)
    ram @ 1860mhz 7 8 7 24 1t 85 1.632v
    pci-e 102
    vtt 1.26v
    vpll 1.80 vpch 1.05 other su normal



    is very good because vcore and vtt is realy low, 1.264v for 3900mhz is good

    i think that my i7 can run @ 4ghz with less vcore of 1.328v...
    i7 4770k @ 4.4GHz | MSI MPower | 8gb Geil Evo Corsa 2133 | Gigabyte GTX670 wf3 | Samsung 830 256gb | 3xWd Re3 raid5 | Antec HCG 620w

    Θ Core i7 4770k 4.4ghz 1.3v :'( Θ Core i7 2600k 4.5ghz 1.344v Θ E8400 500x8 4ghz 1.36v Θ Core i7 860 @ 4ghz 1.328v Θ Turion M500 2.2ghz 1.025v Θ Phenom II 955 c3 3.91ghz 1.52v Θ Phenom II 545 3.77ghz 1.47v Θ
    _~{ ALL RS }~_

  10. #335
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Italy
    Posts
    238
    however now i must try to change my vga card

    my sys is RS, i try different setup but always in game online i get bsod with 0x124

    i try to up vtt +0.04v
    i try to up vpch 0.05v
    i try to up vpll
    i try to relax timing of ram

    never lol always it bah
    ideas?

    ps prime95 stable for 3-4 hours, not very long time but in game i think that my sistem is less stressed
    i7 4770k @ 4.4GHz | MSI MPower | 8gb Geil Evo Corsa 2133 | Gigabyte GTX670 wf3 | Samsung 830 256gb | 3xWd Re3 raid5 | Antec HCG 620w

    Θ Core i7 4770k 4.4ghz 1.3v :'( Θ Core i7 2600k 4.5ghz 1.344v Θ E8400 500x8 4ghz 1.36v Θ Core i7 860 @ 4ghz 1.328v Θ Turion M500 2.2ghz 1.025v Θ Phenom II 955 c3 3.91ghz 1.52v Θ Phenom II 545 3.77ghz 1.47v Θ
    _~{ ALL RS }~_

  11. #336
    Xtreme Mentor stasio's Avatar
    Join Date
    Jan 2008
    Location
    Malaysia
    Posts
    3,036
    Need a Gigabyte latest BIOS?
    Z370 AORUS Gaming 7,
    GA-Z97X-SOC Force ,Core i7-4790K @ 4.9 GHz
    GA-Z87X-UD3H ,Core i7-4770K @ 4.65 GHz
    G.Skill F3-2933C12D-8GTXDG @ 3100 (12-15-14-35-CR1) @1.66V
    2xSSD Corsair Force GS 128 (RAID 0), WD Caviar Black SATA3 1TB HDD,
    Evga GTS 450 SC, Gigabyte Superb 720W
    XSPC RayStorm D5 EX240 (Liquid Ultra)
    NZXT Phantom 630 Ultra Tower
    Win 7 SP1 x64;Win 10 x64

  12. #337
    Registered User
    Join Date
    Apr 2007
    Posts
    53
    Quote Originally Posted by stasio View Post
    - Improve SSD compatibility
    - 09.Nov 10
    Does anybody have a clue what they mean by "Improve SSD compatibility" ?

    Btw, i have a kinda "huge" problem with my new P55A-UD6. It simply doesn't want to boot untill i remove all my USB devices... Everything i have now worked flawlessly on an Asus Maximus III Formula. I have done the upgrade convinced by a good friend of mine... and now i am actually afraid to shutdown or reboot my PC... as i have to open and take every USB out (with my 620W Enermax turned off). I've tried taking each of them out (i have arround 10 USB devices) but it's simply not booting up. All i can see is the lighted Power button on the motherboard flickering a little... Pressing it does absolutelly nothing. I am really out of ideeas... Thx for pointing out any kind of help !
    Last edited by MonkY; 11-15-2010 at 03:34 PM.

  13. #338
    Xtreme Member
    Join Date
    Jun 2008
    Posts
    144
    The Gigabyte GA-P55A-UD3 Support SLi ??
    | Core i5 2500K + NH-U12P | Gigabyte P67A UD4 | 4096MB G.Skill 1600MHz | SLi NGTX 480 M2D15 | WD 500GB Raid 0 | SevenTeam 850 Z-AF |

  14. #339
    Xtreme Mentor
    Join Date
    May 2008
    Posts
    2,554
    Quote Originally Posted by 8800's@over View Post
    The Gigabyte GA-P55A-UD3 Support SLi ??
    No, and crossfire would only work with 16x/4x. It's kind of a single video card board.

  15. #340
    Xtreme Member
    Join Date
    Nov 2009
    Location
    New Jersey, USA
    Posts
    196
    Any word on when to expect the Rev 2 boards?
    Hotrod: Core i7 860 22x182 4GHz Vcore 1.3125v | Noctua NH-D14 w/ P14 + 2 x AP-14's
    Gigabyte P55A-UD3P f13 | 4GB Ripjaws DDR3-2000 @1820MHz | Gigabyte HD 4670 1GB
    Kingston V+ 64GB SSD + Barracuda 1TB 7200.12 | NZXT Beta Evo | Seasonic X-650

  16. #341
    Xtreme Member
    Join Date
    Nov 2009
    Location
    New Jersey, USA
    Posts
    196
    Gigabyte tech support told the P55A-UD3P Rev 2 is already available in the US. Anybody seen a Rev 2 board?
    Hotrod: Core i7 860 22x182 4GHz Vcore 1.3125v | Noctua NH-D14 w/ P14 + 2 x AP-14's
    Gigabyte P55A-UD3P f13 | 4GB Ripjaws DDR3-2000 @1820MHz | Gigabyte HD 4670 1GB
    Kingston V+ 64GB SSD + Barracuda 1TB 7200.12 | NZXT Beta Evo | Seasonic X-650

  17. #342
    Registered User
    Join Date
    Jan 2009
    Posts
    43
    I want to ask you is working properly function CPU Smart FAN Mode [Voltage] driving the 3 pin fans.
    i7-860(20x200)1.3v,Silver Arrow+2xScytheSS SM1425SL12H, P55-UD6 F11d,G.Skill Trident PC 16000 9-9-9-27 1.6v 2x2 gb, gb5770, WD 6400AAKS+WD3200AAKS,Chieftec CFT-650-14CS.

  18. #343
    Xtreme Member
    Join Date
    Nov 2009
    Location
    New Jersey, USA
    Posts
    196
    Quote Originally Posted by tonus View Post
    I want to ask you is working properly function CPU Smart FAN Mode [Voltage] driving the 3 pin fans.
    Yes, for P55A-UD3P . . . before I shorted out my fan control circuit.
    Hotrod: Core i7 860 22x182 4GHz Vcore 1.3125v | Noctua NH-D14 w/ P14 + 2 x AP-14's
    Gigabyte P55A-UD3P f13 | 4GB Ripjaws DDR3-2000 @1820MHz | Gigabyte HD 4670 1GB
    Kingston V+ 64GB SSD + Barracuda 1TB 7200.12 | NZXT Beta Evo | Seasonic X-650

Page 14 of 14 FirstFirst ... 411121314

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •