New batch 980x is a little devil :D 3018B179

[dinos22]

wow nice

[Splave]

thanks brother

as tested in 3dmark your cpu?

havent yet I hate 3d benching dont have a decent 480 1175 if im lucky

[FlanK3r]

my is 3018...Im looking forward, how good will it

[Nanok]

Here is what my 3018B179 want on 1.3V Vantage, my cpu dont seem to have problems with high NB/ram
Testing ln2 hopfully next week.

[Splave]

Cant push vtt over 1.4v on ln2 causes no boot on r3e. on air is nice though 2088 7-7-7-19-60 4.2ghz uncore for 32m

[Nanok]

Im alsoo planing to run it on asus re III, and ln2 next week, i will report if i have the same problems.

[Calathea]

Cant push vtt over 1.4v on ln2 causes no boot on r3e. on air is nice though 2088 7-7-7-19-60 4.2ghz uncore for 32m

What happens when you raise vtt from windows?

[Splave]

here is what I have to do. -90c boot profile with 1.7vcore 1.275vtt reboot, raise vtt to 1.325v reboot, up vtt with oc station in windows to 1.396v. Then when I bsod or lock up and try to restart it will hang at cpu led and I must clear cmos and reload the 1.275vtt profile restart set 1.325 restart and its really annoying and ln2 wasting. I cant cold boot over 1.275vtt it just hang at cpu led. Small price to pay though for a pretty nice chip

Going to test on x-power today

[subaruwrc]

Cant push vtt over 1.4v on ln2 causes no boot on r3e. on air is nice though 2088 7-7-7-19-60 4.2ghz uncore for 32m

have u tried different bios?
its maybe an option.
it worked with my ud3r+980x combo
f5 latest official bios - no boot above 1.395v bios set
f6i beta bios - boot up to 1.495v bios set

[V2-V3]

Some chips i have tested will not tolerate VTT above 1.4v, I have also had chips that will do up to 1.6 Vtt seems to be more of a CPU attribute than a motherboard issue.

on your GT chips have you seen any change on the CB when trying single, dual, or triple channel?

[uncle fester]

Some chips i have tested will not tolerate VTT above 1.4v, I have also had chips that will do up to 1.6 Vtt seems to be more of a CPU attribute than a motherboard issue.

on your GT chips have you seen any change on the CB when trying single, dual, or triple channel?

on my last chip it would have no cb - cbb if i was using dual channel but thats due to crappy IMC cold bugging havnt tested enough on this new one.

[Splave]

some more results, sorry its mostly just messing around

I hope my 06 cpu test didnt degrade my chip

Superpi 1m is okay, than just wanted to see how well pf would run at same settings. Proper runs to come

[V2-V3]

I like the PF and 1M runs

[subaruwrc]

1.4v 5ghz ?
rofl

[Splave]

yep!

[[DRACO]]

yep!

hello,

cb? cbb?

.

[subaruwrc]

nice but haven't you tried lower multi like x33 to have higher ram clocks in 2:10 ?

[Splave]

hello,

cb? cbb?

.

CB is -156c CBB -120c

More to come tonight subaru will update

[subaruwrc]

CB is -156c CBB -120c

More to come tonight subaru will update

okay.
waiting for your results
try x23 uncore multi, today it seemed far better to me than x22 / 3710mhz crash vs 3915mhz spi 1m with same 1.33v vtt /

[PytonOrm]

CB is -156c CBB -120c

More to come tonight subaru will update

just Awesome Splave !! your batch is amazing and what is max speed on air ? can u reach 5G with decent low voltage ? and what is max nb and uncore? Thanks... i just tested 1.78v on VTT it still alive but not gain in bclk either and that is bad

[subaruwrc]

just Awesome Splave !! your batch is amazing and what is max speed on air ? can u reach 5G with decent low voltage ? and what is max nb and uncore? Thanks... i just tested 1.78v on VTT it still alive but not gain in bclk either and that is bad

ehh 1.78v vtt is a LOT

[nacho_arroyo]

Excelent Chip Splave! congratulations!

[Splave]

Thanks nacho, fyi I use 1005 and 704 bios only


Its getting stronger every time I bench it CB in dual channel is -170c. Some more results...sorry pi and pfast ineffecient, wanted to see max mhz on the cpu then will go back and raise uncore and mem frequency

aq3 shot is with gtx-285 at 756/1512 cheers!

[FlanK3r]

SPlave, what BIOS looking better? Thx

[Splave]

hard to say 1005 hard restarts sometimes when I only change the bclk or multi, 704 never seems to do that but CBB is -130c so its not a big deal for me.
I had issues with 2:12 on the 1005 but i seem to be the problem and not the bios!