Hey dudes.

My ?.
Do the crosshair iv's support booting an array that is more then 2tb's?
My 2tb array is running low on space and I'de like to add another 1tb drive to it to top it off.
But if I can't do that..., then I'de like to know about it.
I was reading something that only the uefi v2.x bios'es have that kind of support.
But that sort of thing can be piggybacked on a rom module... like the raid.


Offtopic:
Yeah I know I haven't posted a screen showing a system running pcie @ 250...
My mom doesn't want to upgrade her system until she gets a 1tb drive to replace her 400gb.
That's why I haven't done that yet.

I did some testing of my own system.
Before hand, to make it clear, I've gamed, superpi'ed, and s&m'ed.
I don't like messing with prime, lots of power wasting.

But I did it anyways.
After my initial post here, I was failing prime within an hour.

Anyways I'm able to prime over 8hrs now.
Using the older ver of prime, all 6cores using a 16384k fft to try to save on some ram for other things.
I'll try switching to the new prime later on.

And I'm doing over 4.1ghz with lower then stock vcore.
(benched 4.5ghz for the heck of it, I'll work towards that goal later)

It seems to me that I needed a tab bit more vcore then I thaught.
That's what seems to have been fixing the random crashing and prime failing.
I'm using a -.04v offset for the cpu right now for 275x15 (turbo, normal @ 13x).

Bummer part is my ram speed is only slightly past 1800mhz.
At 2200 mhz s&m errors out real quick, but like I mentioned before memtest has no probs.

My cpu-nb speed is 3025mhz, nice to see it get past 3ghz lol.
Even if it's just a little bit so far.

Another bummer though is my psu.
Without modding my cables, my software readings are dropping .4v on the 12v rail :|.
I either need a new psu or to track down some copper bolts that no one sems to have.
When I ask about copper bolts, the hardware peeps locally always give me a funny look.
I've found aluminum ones that will do the job but I wanted copper.

Plan was to replace the spots in the psu where the bunchs of cables go into the pcb with copper bolts.
With a nut topside.
And then eash wire having wiring nut/terminal thingy's that loop around thet bolt.
Then I'd use another nut to secure that rail down.
Allowing me to add more then 16-18 16awg stranded copper cables per rail.

I'm using an enermax 350w'er at the moment with samxon caps (modded).
It only has the old 4pin cpu power hookup at the moment.

...
And yes I know this doesn't belong here.
I'm only mentioning my situation.
I don't have to prove crap to anyone, but I will if need be's to be nice about it...

I'm really needing that 2200mhz mem to be stable though, hint hint asus...

One other thing.
Does anyone know what exact msr's are needed to mess with the multpliers and vid's on each of the 6 cores (for all pwr states) ?
Because I can write a new bootup module thingy to doit for me before I go into windows.
I just don't trust phenom msr tweaker since the last time I tried it.