The Obsidian 800D thread :D

[corpses3]

White 800D

[pcaddict]

Are those aluminum fans good? O__o

[Batiatus]

Thanks guys!

Are those aluminum fans good? O__o

They are pretty decent, moves a lot of air but the only problem that I do have is the noise level..... which i can live with

[Cookiesowns]

Heres a short little teaser vid I did of my build with the 800D
http://www.youtube.com/watch?v=D4d47OXjG2A&fmt=37

Then Some Pics









ooooo, tubing was glowing

[XpLod-]

My 800D, got it done last night.

One off the best 800D´s that I saw...

Congratulations!

[Batiatus]

One off the best 800D´s that I saw...

Congratulations!

Thanks man. A lot work still need to be done though...

[Ogge_swe]

going to add som more rads next week i think

[mlee49]

[IMG]http://www.sweclockers.com/image/gallery/2010/10/14/Dscn5006.jpg?t=original&k=4f8c543b[/]

going to add som more rads next week i think

Nice rig man! Those dual 295's must heat the hell out of your loop. How does your cpu handle it?

[Ogge_swe]

Nice rig man! Those dual 295's must heat the hell out of your loop. How does your cpu handle it?

idle temp 60c, not good

[firehawk_2010]

Hi added a Crucial SSD C300 64gb and a Lian Li EX-33R1 Internal Hard Drive Cage with a Noctua NF-P12 fan



put some red perpex over back vents

[corpses3]

Hi added a Crucial SSD C300 64gb and a Lian Li EX-33R1 Internal Hard Drive Cage with a Noctua NF-P12 fan



put some red perpex over back vents

Pics of the front please

Where did you get the LIAN-LI cage btw?

[firehawk_2010]

Hi Corpses3 quick pic of the front i've been getting a black lian-li cage to try,ive taken the red led fan out and put a noctua in the red bay , i get most of my parts from overclockers uk thanks

[corpses3]

Hi Corpses3 quick pic of the front i've been getting a black lian-li cage to try,ive taken the red led fan out and put a noctua in the red bay , i get most of my parts from overclockers uk thanks

Thanks, but please moar pics of the front, looks so nice

moar moar moar

[Batiatus]

@Firehawk - Pretty clean set up man.. simple and consistent, more pics would be nice

@Ogge - Is that a secure loop? it doesnt leak? regardless, nice rig!

[turtletrax]

Here is my updated 800D





Have to loose my EK bridge because of the Classified E760's PCI lane distribution. Both 5870's are in 8x mode at the moment. Have some sleeving left to do and use a black SATA cable for the optical drive. May also paint the optical black so it doesnt stick out like a sore thumb.

Also really dont like the res in the way. Makes the sleeved 24 pin a huge PITA to work with and get it looking nice. Also have so much flow that I cannot purge all the bubbles out of the system even with the pumps at min voltage.

Overall, pretty happy with it, but looking forward to starting my next rig

[BlueAqua]

Here is my updated 800D


Have to loose my EK bridge because of the Classified E760's PCI lane distribution. Both 5870's are in 8x mode at the moment. Have some sleeving left to do and use a black SATA cable for the optical drive. May also paint the optical black so it doesnt stick out like a sore thumb.

Also really dont like the res in the way. Makes the sleeved 24 pin a huge PITA to work with and get it looking nice. Also have so much flow that I cannot purge all the bubbles out of the system even with the pumps at min voltage.

Overall, pretty happy with it, but looking forward to starting my next rig

Looks great Damon. Shouldn't the Classified's PCI-E lane distribution work like this:

First slot is 16X if second slot is empty, third slot is 16X if 4th slot is empty, ( basicly 2 cards at 16X, or 3 at 16,8,8, or 4 at 8,8,8,8 See below )

<16
<X
<8
<8

Or
<8
<8
<16
<x

or
<8
<8
<8
<8

( Note the 1X slot will not affect bandwidth, but placing a 1X card in any other slot will )

It looks like you have the 5870's in the first and third slots with nothing in the 2nd and 4th. Is that right?

Don't you hate reservoirs, never a good place to put those bastards.

[turtletrax]

Looks great Damon. Shouldn't the Classified's PCI-E lane distribution work like this:

First slot is 16X if second slot is empty, third slot is 16X if 4th slot is empty, ( basicly 2 cards at 16X, or 3 at 16,8,8, or 4 at 8,8,8,8 See below )

<16
<X
<8
<8

Or
<8
<8
<16
<x

or
<8
<8
<8
<8

( Note the 1X slot will not affect bandwidth, but placing a 1X card in any other slot will )

It looks like you have the 5870's in the first and third slots with nothing in the 2nd and 4th. Is that right?

Don't you hate reservoirs, never a good place to put those bastards.

Thanks Kirk Still needs work but is coming along.

I have the cards in slots 1 and 2 and would be happy with the first card in 16x and second in 8x, but both are in 8x for some reason

I really like the parallel bridge and would love to keep it, also would save me draining the loop and putting in a D-plug.

[closetredneck]

Guess I'm a little late to the party.

Built in 12/09 - 01/10. About to get torn down though...

[v1ral]

Quick question can we have another angle of your case I wanna check out the bottom compartment
Thanks
V1ral

[ibonbird]

here's my share on the mighty obsidian

[turtletrax]

here's my share on the mighty obsidian

That is gorgeous

What fluid are you using?

[ibonbird]

3d surround, eyefinity wallpaper



Hi-Res

link

[SMOKYY]

Excellent work ibonbird

I love your machine

[Phaseshift]

god that looks amazing, I wish it was a little bit smaller, 800d is a monster i was hoping the 700d was going to be a tad smaller

[Ogge_swe]

@Firehawk - Pretty clean set up man.. simple and consistent, more pics would be nice

@Ogge - Is that a secure loop? it doesnt leak? regardless, nice rig!

3/8 tubes over 1/2 barbs, no leaks , the rig is taken apart now, adding more rads