memory problem in flamingblade

[Caravalo]

Hi, I have this problem, and acquired a foxconn flamingbladeboard on newegg http://www.newegg.com/Product/Produc...82E16813186171 and memories g.skill http://www.newegg.com/Product/Produc...82E16820231225


the problem is that if you only install one memory module the PC starts normally, but if I install two or three modules at what comes out the screenshot of the bios, it is recognizing the memory capacity of 1M and crashes, and and updated bios 8C9F1P06 and is still going to the same problem.

and tested the memory in another pc with asus board and are perfect
Other reports g.skill install brand and continues the same problem, there may be incompatibility with the brand?

[Mescalamba]

Not sure, but I think Flaming Blade uses same BIOS as BloodRage?

Though, I had exactly same memory as you, it "worked" on BR, but they seriously suck.. no chance in OCing them at all and their "speed" is just another fail. Crap memory. Try some Crucial 1333CL9 "value" edition without headspreaders and look for those one with D9KPT or similar chips..

Or simply some OCZ, Corsairs should be fine too. I would avoid Mushkins and G.Skill. They are not bad, just work on different mobos, not this one..

[Caravalo]

I'll try to mark a memory to test geil

are you sure the bios is compatible with the Bloodrage?, no fence to pass that the board is completely useless and only has 8 days of purchase.

[PiLsY]

GTX470/480?

Sounds like a memory allocation issue. Get latest beta, P06 is old . FB is NOT bios compatible with blood rage.

[CobraXP]

GTX470/480?

Sounds like a memory allocation issue. Get latest beta, P06 is old . FB is NOT bios compatible with blood rage.

+1

[Caravalo]

I have a gtx465 be so?

[CobraXP]

Try this
http://www.xtremesystems.org/forums/...d.php?t=255398

One of the ones before this fixed the 4xx hang issue

[Heavybomber]

This explains your problem. Get latest beta from here. There might be newer, but I can't find the thread.

P.S. Ups, sorry. I late

[Caravalo]

FlamingBlade GTI bios is compatible with the FlamingBlade?

mine is only FlamingBlade.


install BIOS Version: 8C9F1G21.BIN and still the same problem

http://www.quantum-force.net/productshow.aspx?id=86

[CobraXP]

G24 Bios for FlamingBlade
http://ex3clan.com/foxconn/flamingbl...2-8C9F1G24.zip

Description for Customer :

1. Corrected XMP memory VID.

2. Fixed 12GB memory hang-up at BIOS POST 4Eh issue.


PCIe master selection not in this bios will be in the next bios


This is the latest Beta Bios... it is not of foxconn's site

[Caravalo]

ready and tested the G22 bios, no problems, thank you very much

[CobraXP]

Great to hear!!!!