cinebench 11.5

[Manicdan]

too bad it crashed right after i saved the SS :p

it still counts
congrats,

and i think it would have survived longer if you gave it 1.6 or 1.65v

[eRazorzEDGE]

It might. I really don't want to fry this chip too soon, but then again, I'm still 55°C below the advertised max... maybe a cinebench at 5.0 @ 1.75v :p

[ReKcOlNu]

Here's my run at 4.625GHz @ 1.55v with the NB at 3.0GHz @ 1.35v under my stock VapoChill LS.

Nice! You made it into the top 5!
Score chart here.

[Manicdan]

i would post my score, but it would be for the bottom 5 thubans, lol
that nuts the #2 guy is on water (at 1.68v thought)

[ReKcOlNu]

i would post my score, but it would be for the bottom 5 thubans, lol
that nuts the #2 guy is on water (at 1.68v thought)

More scores the better, its good for references, for example Lightman (post #99) gave use a base reference for the 1090T (no overclocking), very useful to others IMO.

[Manicdan]

More scores the better, its good for references, for example Lightman (post #99) gave use a base reference for the 1090T (no overclocking), very useful to others IMO.

ill try pushing it again tonight and screenshot it for ya. im really limited by the NB being stuck at 10x and it sucks more than my ex gf

[Manicdan]

heres mine


5.95 is what i just got with that cpu speed, which is my 24/7 speed, which does have turbo on which hits right at 4ghz. (the screenshot is done while in the middle of a run to show you 100% load speed, otherwise you would see 900mhz on cpuz)

my fastest is saved on there at 6.27pts, but you can ignore that one, since i might try to beat that soon enough

PS, cooling is H50

[equinox1]

i would post my score, but it would be for the bottom 5 thubans, lol
that nuts the #2 guy is on water (at 1.68v thought)

thanks i think?
its on a chiller at -5c so it does not mind 1.68

[eRazorzEDGE]

thanks i think?
its on a chiller at -5c so it does not mind 1.68

How much voltage have you pumped through it?

And a side note, anyone experiencing problems running 2x2GB sticks of ram at 1600 MHz? or running higher than 3.0GHz on the north bridge? I guess I can always go buy another set of ram to test...

[demonkevy666]

Here's my run at 4.625GHz @ 1.55v with the NB at 3.0GHz @ 1.35v under my stock VapoChill LS. It got up to -4°C for this Cinebench run. I just got this chip less than a week ago and normally run it at 4.5GHz @ 1.525v playing BC2 and it hasn't crashed yet.


did someone say they wanted a 5GHz shot?

too bad it crashed right after i saved the SS :p

oh it felt stable looked stable loaded stable then Bam! BSOD~! :/ out of no where lol

i would post my score, but it would be for the bottom 5 thubans, lol
that nuts the #2 guy is on water (at 1.68v thought)

it would seem the cold is better

thanks i think?
its on a chiller at -5c so it does not mind 1.68

like his NB only's need 1.35 volts for 3000mhz
while mine on air for stable at 3000mhz need 1.5 volts

How much voltage have you pumped through it?

And a side note, anyone experiencing problems running 2x2GB sticks of ram at 1600 MHz? or running higher than 3.0GHz on the north bridge? I guess I can always go buy another set of ram to test...

Nb add stress and heat most likely Nb will get finicky when unstable.
ram unstable happens above 1600mhz for most people.
all this cold makes me think about buying a tec block.

[equinox1]

How much voltage have you pumped through it?

And a side note, anyone experiencing problems running 2x2GB sticks of ram at 1600 MHz? or running higher than 3.0GHz on the north bridge? I guess I can always go buy another set of ram to test...

if your running that cold you should have no problems at 1.63 to 1.65 on cpu.
nb at 1.35 and nb/cpu at 1.40 with nb at 3100+

i ran my chiller for 8 hrs straight running all sorts of benches without any worry at all at 4700 to 4800 mhz.

my ram is corsiar dominator gt's that i run at 1750 to 1850 at 7,7,7,24

how cold can you get?

[eRazorzEDGE]

I've got the PhenomMsrTweaker runnin in the background for everyday tasks, keeps it idled at 1GHz @ 1.2v and -22°C. once it gets a load, that temp ramps up steadily, it'll usually stay under 0°C if it's not being loaded for long.

I'm running some OCZ plats, just some 1600MHz ones I picked up a while ago, and not the good ones. I think I'm gonna go make a purchase on some G.Skill Flare 2x2GB ones. Not quite sure which flavor to get. they have two 2000MHz kits and two 1800MHz kits, one with loose timings and one with tight timings.

thoughts?

[nex_73]

Update for #163
Got bored today (hangover) and tested out Bios 1102

[FlanK3r]

update me, still aircooling, finally im broken 7.7 points

[Barr3l Rid3r]

Not as good as Flanker sample, but I still working on it:

[FlanK3r]

very nice, what cooling do u using?

[Barr3l Rid3r]

very nice, what cooling do u using?

EK Supreme Full-Nickel + RX240

I needed 1.65v for that, maybe the AX850 will help a little bit.

[ReKcOlNu]

Not as good as Flanker sample, but I still working on it:

@ Barr3l Rid3r: Not sure what MHz I should enter for you so just going with CB's 4410 for now, otherwise let me know and I'll change it.

@ everyone else: Please include the type of cooling such as Air, Water, DICE, LN2, etc, etc, Thanks!, and PM me if you need me to change or update something on the AMD CB 11.5 score charts page.
Cheers!

[Barr3l Rid3r]

@ Barr3l Rid3r: Not sure what MHz I should enter for you so just going with CB's 4410 for now, otherwise let me know and I'll change it.

@ everyone else: Please include the type of cooling such as Air, Water, DICE, LN2, etc, etc, Thanks!, and PM me if you need me to change or update something on the AMD CB 11.5 score charts page.
Cheers!

where are you including? I couldn't find any table around.


But thats right, Stage 0 at 4.41Ghz CnQ ON @ PhenomMsrTweaker

[chinook]

Here's my entry. 1090T on CHIV Formula, watercooled.

[Barr3l Rid3r]

Getting better, w/out CnQ this time:

[ReKcOlNu]

where are you including? I couldn't find any table around.

Guess you missed it in my posts above, here it is...

AMD CB 11.5 score charts page

Updated again. .

[Barr3l Rid3r]

Guess you missed it in my posts above, here it is...

AMD CB 11.5 score charts page

Updated again. .

Double sorry

[chinook]

Do you guys turn off everything possible in the OS before you do the test to get a few more ounces for the score?
I ask because i'm looking at the charts and i see few cases of better scores on lower core clockspeed and i've been wondering what could be the cause.

[wez]

Do you guys turn off everything possible in the OS before you do the test to get a few more ounces for the score?
I ask because i'm looking at the charts and i see few cases of better scores on lower core clockspeed and i've been wondering what could be the cause.

No other apps running, and run the bench a few times as score may vary little between runs. Only thing I do

imc/ram does a fair amount for the score, so I guess the variations at same core clock comes from that.