Hi guys! Im having some trouble with my set up to reach a decent OC for 24/7, can you give me a hand?
First of all, my config, so you can know what we have here:
Q9550 D0+Scythe Ninja Rev. B P/P
Corsair Dominator GT 2x2GB 1600Mhz Cas 7-7-7-20 @ 1.65v
ThermalTake Thoughpower 1000W
Windows Seven 64bit
I think that would help. Okey, I was using my config at 3400Mhz at stock vcore, wich was 1.275v(at least that was the vid that the bios show me), mems at stock speed with stock latencies and nothing more of voltage touched. This one passed a few hours stable at Prime95 with Blend so that keeps me safe. This Saturday I removed the Q9550 to place a Pentium IV 631 D0 to play a little bit with it, I managed 4500Mhz with 1.275v and was stable, till I reach the 310FSB. When I reach that amount of FSB, not matter what or where, in Bios, it wouldn't reach Windows, in Windows with 300FSB trying to get to 310FSB with Setfsb give me the same results, BSOD. Anyway, tryed any possible configuration it wouldn't do anything more than fail. There goes the first problem.
Second and wich is getting me piss off. After that failed sesion, I took up the 631 and reinstalled the Q9550 in the socket, enter Bios, loaded the same old working configuration and... Nothing, it won't boot up again. The config was 8.5 multiplier with 400FSB, wich would give 3400Mhz as I used to keep it stable with the Domis at stock speed.
Now Im running the system at 3100Mhz (8.5x365FSB) at 1.250v Vdroop Enabled with mems at 1460Mhz 6-7-7-20-2T at 1.65v with the divisor of 1:4 (400) and no other adjusments, EIST Disabled, C1E Disabled, etc.
I don't want huge voltage or amazing speeds, just my old stable 3400Mhz with stock voltage
Bookmarks