Gigabyte EX58-UD5/Extreme Discussion Thread

[Godmyster]

hey all,

I finally just got my self the coolermaster H50 to cool off my i7 920 i am now in need of some help i have my setting at default at the moment so i was wondering what setting can i go for that should get me some good reults and be stable?

My CPU batch is #3838B556 and it is a D0 i am using a X58 UD5 with the F9E bios.

[Andrea deluxe]

hey all,

I finally just got my self the coolermaster H50 to cool off my i7 920 i am now in need of some help i have my setting at default at the moment so i was wondering what setting can i go for that should get me some good reults and be stable?

My CPU batch is #3838B556 and it is a D0 i am using a X58 UD5 with the F9E bios.

flash the f12 bios and:


Advanced CPU Features:
CPU Clock Ratio ................................ [19]
Intel(R) Turbo Boost Tech ...................... [disabled]
CPU Cores Enabled .............................. [all]
CPU Multi Threading .............................[enabled]
CPU Enhanced Halt (C1E) ........................ [disabled]
C3/C6/C7 State Support ......................... [disabled]
CPU Thermal Monitor ............................ [disabled]
CPU EIST Function .............................. [disabled]
Virtualization Technology ...................... [enabled]
Bi-Directional PROCHOT ......................... [enabled]

Uncore & QPI Features:
QPI Link Speed ..............................[x36]
Uncore Frequency ............................[x16]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [200]
PCI Express Frequency (MHz) ........................ [100]
C.I.A.2........................................... .. [disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[1000mv]
PCI Express Clock Drive ................... [900mv]
CPU Clock Skew ............................. [200ops]
IOH Clock Skew ............................. [auto]

Advanced DRAM Features:
Performance Enhance ...................... [standard]
Extreme Memory Profile (X.M.P) ........... [disabled]
System Memory Multiplier (SPD) ........... [8]
DRAM Timing Selectable (SPD) ............. [quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................[8]
tRCD ..................................[8]
tRP ...................................[8]
tRAS ..................................[24]
CR.....................................[2]
B2B.....................................[auto]


Advanced Voltage Control:
CPU Intel Core i7 920 D0 Stepping
Load Line Calibration ................. [enabled]
CPU Vcore ..............................[1.3]
QPI/VTT Voltage 1.150v .................[1.34]
CPU PLL 1.800v .........................[auto]
PCIE 1.500v ...........................[auto]
QPI PLL 1.100v ........................[auto]
IOH Core 1.100v .......................[auto]
ICH I/O 1.500v ........................[auto]
ICH Core 1.1v .........................[auto]

DRAM
DRAM Voltage 1.500v .............. [1.64]
DRAM Termination 0.750v.......... [AUTO]
Ch-A Data VRef. 0.750v ...........[AUTO]
Ch-B Data VRef. 0.750v ...........[AUTO]
Ch-C Data VRef. 0.750v ...........[AUTO]
Ch-A Address VRef. 0.750v ........[AUTO]
Ch-B Address VRef. 0.750v ........[AUTO]
Ch-C Address VRef. 0.750v ........[AUTO]

[Godmyster]

hey thanks for the settings i updated the bios and put in exactly those settings but it didnt boot for some reason, after saving those settings it restarted and just stayed there with the graphic card fan at max i had to restart the computer and it gave me that fail safe boot because of the overclock.

[acebmxer]

hey thanks for the settings i updated the bios and put in exactly those settings but it didnt boot for some reason, after saving those settings it restarted and just stayed there with the graphic card fan at max i had to restart the computer and it gave me that fail safe boot because of the overclock.

Advanced CPU Features:
CPU Clock Ratio ................................ [20]
Intel(R) Turbo Boost Tech ...................... [Enabled]
CPU Cores Enabled .............................. [all]
CPU Multi Threading .............................[Disable] - Enabled if you can boot and/or temps ok may need extra vcore
CPU Enhanced Halt (C1E) ........................ [Enabled]
C3/C6/C7 State Support ......................... [Enabled]
CPU Thermal Monitor ............................ [Enabled]
CPU EIST Function .............................. [Enabled]
Virtualization Technology ...................... [Disabled]
Bi-Directional PROCHOT ......................... [Enabled]

Uncore & QPI Features:
QPI Link Speed ..............................[x36]
Uncore Frequency ............................[x16]or x17, x18 (always 2x +1 or +2 of memory Multi)

Standard Clock Control:
Base Clock (BCLK) Control .......................... [200]
PCI Express Frequency (MHz) ........................ [100-102]
C.I.A.2........................................... .. [disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800mv]
PCI Express Clock Drive ................... [900mv]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]

Advanced DRAM Features:
Performance Enhance ...................... [Expert]
Extreme Memory Profile (X.M.P) ........... [disabled]
System Memory Multiplier (SPD) ........... [8]
DRAM Timing Selectable (SPD) ............. [quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................[8]
tRCD ..................................[8]
tRP ...................................[8]
tRAS ..................................[24]
CR.....................................[1]
B2B.....................................[auto]


Advanced Voltage Control:
CPU Intel Core i7 920 D0 Stepping
Load Line Calibration ................. [enabled]
CPU Vcore ..............................[1.3]
QPI/VTT Voltage 1.150v .................[1.34]
CPU PLL 1.800v .........................[1.6]
PCIE 1.500v ...........................[1.5]
QPI PLL 1.100v ........................[1.16]
IOH Core 1.100v .......................[1.100 - 1.200]
ICH I/O 1.500v ........................[1.5]
ICH Core 1.1v .........................[1.1]

DRAM
DRAM Voltage 1.500v .............. [1.64]
DRAM Termination 0.750v.......... [AUTO]
Ch-A Data VRef. 0.750v ...........[AUTO]
Ch-B Data VRef. 0.750v ...........[AUTO]
Ch-C Data VRef. 0.750v ...........[AUTO]
Ch-A Address VRef. 0.750v ........[AUTO]
Ch-B Address VRef. 0.750v ........[AUTO]
Ch-C Address VRef. 0.750v ........[AUTO]

Try those settings. for my cpu that is too much vcore and vtt for those settings. If you can boot and is stable lower those as low as you can.

BSOD error codes

0x00000050 << Incorrect memory timing/freq or uncore multi
0x00000124 << incorrect qpi/vtt voltage ( to much/not enough)
0x00000101 << not enough Vcore voltage

[Godmyster]

Tryed those settings acebmxer did exactly the same thing, restared the computer and didnt even boot just stayed there with the black screen.